Nut upsdev - Nov 2011 - [HCL] ALLSAI LV 2K supported by blazer_usb

Hi,

another UPS piece supported by blazer_usb:

ALLSAI
model LV 2K

upsc output:

battery.voltage: 82.08
battery.voltage.nominal: 72.0
beeper.status: enabled
device.mfr: 
device.model: LV 2K
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.3
driver.version.internal: 0.03
input.current.nominal: 18.0
input.frequency: 59.9
input.frequency.nominal: 60
input.voltage: 118.0
input.voltage.fault: 118.0
input.voltage.nominal: 110
output.voltage: 109.8
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 00001907
ups.load: 23
ups.mfr: 
ups.model: LV 2K
ups.productid: 5161
ups.status: OL
ups.temperature: 16.3
ups.type: online
ups.vendorid: 0665

shutdown sequence was so far not attempted; will be hopefully attempted
during next site visit (CTIO, Chile)

http://www.allsai.com (probably full range of their devices will be
suported)

with best regards

Petr Kub?nek

Hi Petr,

2011/11/20 Petr Kub?nek <petr at kubanek.net>:
> Hi,
>
> another UPS piece supported by blazer_usb:
>
> ALLSAI
> model LV 2K
>
> upsc output:
>
> battery.voltage: 82.08
> battery.voltage.nominal: 72.0
> beeper.status: enabled
> device.mfr:
> device.model: LV 2K
> device.type: ups
> driver.name: blazer_usb
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.4.3
> driver.version.internal: 0.03
> input.current.nominal: 18.0
> input.frequency: 59.9
> input.frequency.nominal: 60
> input.voltage: 118.0
> input.voltage.fault: 118.0
> input.voltage.nominal: 110
> output.voltage: 109.8
> ups.delay.shutdown: 30
> ups.delay.start: 180
> ups.firmware: 00001907
> ups.load: 23
> ups.mfr:
> ups.model: LV 2K
> ups.productid: 5161
> ups.status: OL
> ups.temperature: 16.3
> ups.type: online
> ups.vendorid: 0665
>
> shutdown sequence was so far not attempted; will be hopefully attempted
> during next site visit (CTIO, Chile)
>
> http://www.allsai.com (probably full range of their devices will be
> suported)
thanks for your report.
I will wait for your shutdown test results before adding a new entry.
If you have a chance to do so, please also try "upsrw" and
"upscmd -l"
and send us back the output.

cheers,
Arnaud