similar to: Fwd: [HCL] Novex NUPS-650 supported by blazer_usb

Merry Christmas to you all and best wishes! I ran into exactly the same problem as described. OS: FreeBSD 9.0-Rel UPS: Eaton E-Series NV 600H NUT: from Ports, nut-2.6.5_1 driver: blazer_usb I am sure the problem is not permission-related as it occurs even when the driver runs as root. My tested recipe for USB permissions is: 1. run usbconfig to find where the device is connected. In my case:

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

NUT 2.8.01 When I pull the USB cable from the UPS, I get two notifications of the nocomm-timer expired. The first notification is in the proper sequence, the second notification occurs after 'commok' occurs. Seems somehow that upssched-cmd is getting a second nocomm-timer expired delayed. Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

Hello, I have just installed nut_2.6.0 from Debian testing, do anyone know the correct driver for this ups? The blazer_usb don't report battery-charge, the bundled software report charge and runtime. root at pluto<~>upsc powerwalker battery.voltage: 40.86 battery.voltage.nominal: 36.0 beeper.status: enabled device.mfr: device.model: HV 1K device.type: ups driver.name: blazer_usb

Hello. I have this UPS: Krauler UP-D1200VA Megatec USB protocol Vendor ID: 0x0001, Device ID: 0x0000 #KRAULER UP-D1200VA VER6.00 #220.0 004 23.50 50.0 Currently I have nut 2.2.0 installed from sources. Installation was successful except that I had to change a string in 52-nut-usbups.rules from: SUBSYSTEM!="usb_device", GOTO="nut-usbups_rules_end" to:

Hi - I have NUT running very nicely on a serial port on one of my OpenBSD servers, and using hidups on a RHEL4 box. Now I'd like to run it on two Macs, a PowerMac and an XServe G4. What is the USB port I need to configure, and do I need the newhidups driver? Thanks in advance for the help! Ted

Ubuntu 8.04 Nut : Version: 2.2.1-2.1ubuntu7.2 Hello, I choose the megatec driver and I connect through a serial cable. I receive a "This UPS has an unsupported combination of battery voltage/number of batteries" message. I know this is not an error but I don't really what I have to do next. Here is the result of /lib/nut/megatec -a infosec -DDD debug level is '3'

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3

Hello, I'm sorry if i'm not sending to the good email adress, please transfer this mail to the good one if necessary... I have tested and run the driver named "blazerd_usb" with differents products from the infosec company (tested on the following UPS : X2, X3, X4, E2, E3, E4) Is it possible to add the to the Hardware compatibility list ? Thank you, Regarde, Jeremy

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 18.0 input.frequency: 59.9

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello 2All. Today I had purchased Ippon Smart Power Pro 1400 UPS for my home PC. It is a higher class device relative to Ippon Back Pro model line. It has one RS232 port and one USB port to connect the monitoring station to. UPS talks with megatec protocol, RS232 works as usual. USB connection is done through Cypress Semiconductor usb-to-serial chip

Hi to all! Path send by Brian R. Smith with subject "[Nut-upsdev] Dynamix 650 VA USB - broken, have rough fix" really works! Tested with no-name UPS (works with UPSilon 2000 Windows software) and has USB vendorid=0001 productid=0000 Please, add it to the main branch of blazer_usb.c I belive that several users agree this.

I've just commited a patch in trunk that adds langid_id as an option (r3364). Since I'm in the process of releasing 2.6.3, I would appreciate if you can do so quickly ;-) There is also some test code, that prints out (debug level 1) the first supported language ID from the device. Please post back this trace, so that I can improve the code and automate more this. cheers, Arnaud

I have Tecnoware EcoStrip 1100VA UPS which unfortunately uses Upsilon 2000 software. Their Linux software does not work but Windows version does so I made pcap file of the usb traffic with Wireshark available at http://www.dumbot.net/problems/EcoSrip1100VA.pcap I've read many posts on problems with these devices and tried all variations available with the blazer_usb driver without any luck.

Atlantis Land A03-P551(V1.2) battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.langid_fix: 0x0409 driver.parameter.pollinterval: 2 driver.parameter.port: x driver.version: 2.6.4 driver.version.internal: 0.08 input.current.nominal: 0.0

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.idleload: 30 driver.parameter.pollinterval: 5

Device manufacturer: JAWAN tech Name:JW-UPSLC02 [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 5161

Device manufacturer: JAWAN tech Name: JW-UPSLC02 Protocol: Q1 / Megatec protocol Product Description from ?nut-scanner? : ? WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps? vendorid = "0665" productid = "5161" [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0