similar to: Tripp Lite Internet Office 350VA

I have a Tripp Lite OMNI900LCD. It has a usb connector and claims to be USB/HID. I haven't been able to get it to work with newusbhid or tripplite_usb. Here's lsusb -v output: Bus 001 Device 013: ID 09ae:2005 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level)

Hello all; I am new to this list. Recently we have been getting these cheap new Tripp-Lite "LCD" style UPS'es around here, and I was surprised to find the lack of Linux support. The model name is OMNI650LCD. Anyway, I tried the tripplite_usb driver and got a message instructing me to contact this mailing list. I might try to fix the problem myself, if I was more familiar with the

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

Hey, I am wondering if anyone gotten nut to work with a Tripp Light Smart Pro 2U Rack/Towers (SMART2200RMXL2U). If so which driver did you use, or what driver do you think I should try? Also when trying use a nut driver, do you have to be a nut user? Thanks, Ricky -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

<nut-upsuser at lists.alioth.debian.org> I am doing my best to avoid have to spend $280 for a network monitoring card to put into a $190 UPS just to have some good remote monitoring capabilities. Rather, I would like to monitor my many 1U Tripp Lite's on my network using a Raspberry Pi running Raspian and using NUT. However, I cannot seem to get it working. And I while the hardware

Well, I have good news and bad news. I have a Tripp Lite SmartPro UPS attached to a Linux server running Ubuntu 5.10, and I'm running the just-released nut 2.0.3. I had error -71 from the UPS, which Charles Lepple correctly called out as a likely cable problem (thank you, Charles.) The cable provided with the UPS by Tripp Lite was just plain bad. Not too long, mind you- defective. I

Original Message >I have 2 SmartUOS1050SLT's that apparently protocol 3004, has there >been >any progress on getting these units supported under nut? I am running >version 2.4.1, and get the following output when starting the driver. >#lsusb >Bus 005 Device 002: ID 09ae:0001 Tripp Lite ># upsdrvctl -DDDD start >Network UPS Tools - UPS driver controller 2.4.1

Got one of these up and running with the tripplite_usb driver on Ubuntu Server 12.04 x64. This particular model has product code 0x1000. Setup and installation was pretty standard. The only hiccup was I had to create a udev rule to give the nut group access to USB devices. If anyone has any questions let me know. Here's what I am got back from the upsc command: battery.charge: 100

On March 6, 2015, at 6:17pm, Charles Leppe ,cleppe at gmail.com> wrote: If this is the same protocol 3005 that we saw in mid-2014 (USB ID: 09AE:0001), then support will be part of the upcoming NUT 2.7.3 release. You wouldn't happen to know anyone who would be able to publish the specs of that protocol, would you? ;-) That would help remove the "experimental driver" warning.

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

Hi developers, I would like to propose making a release soon from the current NUT trunk. There have been a lot of important changes since 2.0.5: new drivers added/refined (e.g. megatec_usb); the switch to Automake; the renaming of newhidups to usbhid-ups; automatic installation of hotplugging files; IPv6 support; improvements to the tripplite_usb driver; improvements to the gamatronic driver;

I have a Tripp Lite SMART1500 RMXL2U UPS and I'd love to be able to access it via USB. I found that the latest NUT sources in CVS has a driver that looks like it might work. Any chance that driver would work the my UPS? I tried running it and it's not working: failed to detach kernel driver from USB device... trying again to claim USB device... failed to claim USB device, trying 1

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

Test machine: Windows 7 Pro x64, NUT 2.6.5-3 UPS model: Tripp-Lite Internet Office UPS (INTERNET525U) I needed a UPS and I had this old, but lightly used Tripp-Lite in storage. On the compatibility list I see a (?similar?) INTERNETOFFICE700 using the tripplite_usb driver. But the driver is not liking this particular model that I have. I'll be receiving a 3S550 soon, so I'm not

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

On Thu, Jun 26, 2014 at 10:20 PM, Steve Ballantyne <steve.ballantyne at gmail.com> wrote: >> However, we don't have all of the 09AE/0001 protocols decoded in the >> tripplite_usb driver. > > I can try to help out on this front? :-) Definitely. >> > 9.783126 Unknown input voltage range: 0x02 >> > 9.783308 Unknown number of switchable