similar to: [HCL] Apollo 1085VC Supported by blazer_usb

Device manufacturer: JAWAN tech Name:JW-UPSLC02 [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 5161

Device manufacturer: JAWAN tech Name: JW-UPSLC02 Protocol: Q1 / Megatec protocol Product Description from ?nut-scanner? : ? WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps? vendorid = "0665" productid = "5161" [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0

2009/4/28 mvochin <mvochin at elcom.pub.ro> > Hi Arnaud, > Hi > > Regarding ups compatibility list, Apollo 1000A, and 1000F Line > Interactive Series is also supported as genericups upstype=4 (I guess the > whole apollo family is supported with this driver) > http://www.apollotw.com/products-li.html I have some hard time trying to access it. anyway, I've

Hi Having followed this guide: http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/and seeing support for Apollo UPSes mentioned on the compatibility list (genericups, type=4) I tried to set up Nut as follows. OS: Ubuntu Server 12.04 Nut: 2.6.3 (I believe - from Ubuntu repos) ups.conf: > [apollo] > driver = genericups > upstype = 4 > port = /dev/ttyUSB0

Hello, When I run the 'smbclient -L apollo' command at the UNIX prompt a I get an error. I have gone as far as I can in this DIAGNOSIS.txt file. Does anyone have any thoughts on what may be causing my problem ? I have made my comments to the DIAGNOSIS.txt file via '---- davidw {comment}' so you can see what I've done to date. Also, I thought I'd pass on the output

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

Anyone know if NUT works with Apollo UPS's? Specifiacally this one: http://www.apollotw.com/nn0905.htm Tnx, Danilo -------------- next part -------------- A non-text attachment was scrubbed... Name: danilo_godec.vcf Type: text/x-vcard Size: 315 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20081113/235f18a7/attachment-0001.vcf

https://bugs.freedesktop.org/show_bug.cgi?id=56340 Priority: medium Bug ID: 56340 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] Severe instability of VIA Technologies Apollo MVP3 chipset and NVIDIA RIVA TNT2 M64 graphics QA Contact: xorg-team at lists.x.org

Dear Sirs, I'm trying to migrate to LDAP (OpenLDAP-2.1), and I encounter some problem when running import_smbpasswd.pl script. I attached slapd's log file, any can help me to understand what is required to be done ? Regards, (????????? ?????????) Ilia Chipitsine (???? ???????) -------------- next part -------------- Mar 11 16:42:31 apollo slapd[14080]: daemon: activity on 1 descriptors

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3

Hello, I'm sorry if i'm not sending to the good email adress, please transfer this mail to the good one if necessary... I have tested and run the driver named "blazerd_usb" with differents products from the infosec company (tested on the following UPS : X2, X3, X4, E2, E3, E4) Is it possible to add the to the Hardware compatibility list ? Thank you, Regarde, Jeremy

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 18.0 input.frequency: 59.9

Atlantis Land A03-P551(V1.2) battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.langid_fix: 0x0409 driver.parameter.pollinterval: 2 driver.parameter.port: x driver.version: 2.6.4 driver.version.internal: 0.08 input.current.nominal: 0.0

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.idleload: 30 driver.parameter.pollinterval: 5

On Sep 21, 2015, at 7:38 AM, Charles Lepple <clepple at gmail.com> wrote: > > (please keep the list CC'd) > >> On Sep 21, 2015, at 5:09 AM, Uro? Gaber <uros.gaber at gmail.com <mailto:uros.gaber at gmail.com>> wrote: >> >> Hi. >> No for me nutdrv_qx driver is not working with this UPS. >> Here's log: >> Sep 21 11:06:39

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port:

Hi everybody, following UPS is successfuly tested. Model: FSP Champ Tower 1k https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/ lsusb: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial ups.conf: [powerpal]     driver = blazer_usb     port = /dev/hidraw0 Mode = standalone Distro = CentOS 8 What I did to get UPS communicate. In terminal run as root: ln -s

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as Samurai LCD 1000 [ups] driver = blazer_usb port = auto vendorid = 0001 productid = 0000 upsc ups Init SSL without certificate database battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal:

Novex NUPS-650 USB information $ lsusb -s 002:027 -v Bus 002 Device 027: ID 0001:0000 Fry's Electronics Device Descriptor: ??bLength ???????????????18 ??bDescriptorType ????????1 ??bcdUSB ??????????????1.00 ??bDeviceClass ???????????0 (Defined at Interface level) ??bDeviceSubClass ????????0 ??bDeviceProtocol ????????0 ??bMaxPacketSize0 ????????8 ??idVendor ??????????0x0001 Fry's

Hi All, I am cross posting this to the Asterisk Users, Biz, and Dev lists at the suggestion of David Duffet, so sorry if you see it multiple times. As this year Astricon is in Orlando, and most of us are tech geeks in on form or another, we are trying to organize a road trip to see NASA's Kennedy Space Center. I have been in touch with their group sales office and was told that there is a