similar to: Polycom firmware 4.0.1 and paging

Hi, I've been meaning to fix my non-working paging feature here for a while, and I've just spent the last 5 hours looking at many, many web pages that all say the same thing. I am using Asterisk 1.6.2.18 and Polycom phones, both older (501 with "latest" legacy 3.1.7 firmware) and newer (335 and 650 with latest 3.3.1f). I have changed the correct values in sip.cfg like

Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

Hi, I'm having trouble setting the ringtone on my Polycom 501. The relevant entry in extensions.conf is: exten => 801,hint,SIP/creative1 exten => 801,1,SetVar(ALERT_INFO="Test") exten => 801,2,Dial(SIP/creative1,20,Ttr) In the sip.cfg: <alertInfo voIpProt.SIP.alertInfo.1.value="Test" voIpProt.SIP.alertInfo.1.class="13"/> and <TEST

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

(new asterisk user - currently setting up Polycom IP600 phones) Does anyone know if it's possible to make a sip phone instantly pick up on speakerphone when a particular call comes in? Eg so that you can quickly bother someone across the office without making them reach for their phone?

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

Hi Guys This has been discussed a little in the list before so my apologies for sendig it again but I have done what others have done in the list but to no avail. I have configured Asterisk to send the callerID of extension phones as "firstname lastname" and that seems to work well and extensions show calls originating on other extensions in this format. I set the following in

I am using SugarCRM together with the asterisk plugin, which allows me to click a number, SugarCRM calls my extension then places the call when I pickup. I would like to have that extension auto-answer. I set it up as line 3 on my phone so normal calls do not get auto-answered. However, I have not been able to get this to work. Has anyone implented this? This is what I put in the config file

With my thanks to Brian West and his offering in the thread, "Subject: Re: [Asterisk-Users] Remote reload Cisco 7960" I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones PolyReboot.pl takes an IP address as a single argument and reboots the phone. You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg - all lower case. Further, you need to use ftp for

Kevin wrote: > There is a reboot script posted on the wiki to reboot Polycom > telephones. When I execute this script, I get the following messages. > I am concerned as this is causing issues with asterisk and the PRI. > Does anyone have any ideas why this would be happening? > > > > asterisk console: > > -- Remote UNIX connection > -- Remote UNIX

Hi - Just wondering if anyone has gotten a Polycom VVX phone to successfully do an Auto Answer with asterisk. I have an older generation of Polycom phones that do this just fine, but I can't seem to make the VVX phones work. I tried the guide here: http://community.polycom.com/t5/VoIP/FAQ-How-can-I-change-my-Ringtone-or-Ring-in-a-special-manner-for/td-p/5167 And I have this in my diaplan:

Hi all, My company has pretty much standardized on Polycom phones and I am in the beginning phase of writing a GUI for administering/managing polycom provisioning at multiple sites which we intend to release as OS. I've started studying the docs and I'm having trouble understanding the following xml attribute: voIpProt.SIP.requestValidation.x.request.y.event I understand what it

Hello all, I have a system running AsteriskNOW with asterisk asterisk-1.8.8.1-1_centos5 from AsteriskNOW repository. I just changed our Polycom 335 sip.conf so that blindpreferred=1 (all transfers default as blind transfers). If a customer calls in & we answer & transfer, everything works fine. But if we call out to a customer & then transfer to another internal extension, that

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the