Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer correctly. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110224/a1d83130/attachment.htm>
If you compare a working config with a non-working you will see something with the answer type. I had that issue until I down rev'd. Look for something like "Ring Answer", I forget the exact details now. ________________________________ From: asterisk-users-bounces at lists.digium.com on behalf of Mike Sent: Thu 2/24/2011 1:41 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] Paging with Polycom 3.3.x Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer correctly. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110224/5dcae813/attachment.htm>
On Thu, Feb 24, 2011 at 1:41 PM, Mike <list at net-wall.com> wrote:> Hi, > > > > My phones stopped auto-answering when being paged, since I moved on to > Polycom firmware 3.3.0 (3.3.1 is the same, I tried).? That is with Asterisk > 1.6.2.16. > > > > I looked at the wiki but nothing I try there works, even if I cut and paste > the same setup. > > > > Any one has any idea of what I should change from my old 3.2.3 setup?? My > older phone (501) still using 3.1.6 still auto-answer correctly. >Polycom changed some of the config file options as outlined in the UC Software upgrade guide. I am using the following for paging. <voIpProt.SIP> <voIpProt.SIP.alertInfo voIpProt.SIP.alertInfo.3.class="ringAutoAnswer" voIpProt.SIP.alertInfo.3.value="Ring Answer"> </voIpProt.SIP.alertInfo> </voIpProt.SIP> </voIpProt> Ryan