thr3ads.net - asterisk users - [Asterisk-Users] Polycom Reboot Script

If this information is useful, please help other people find it:
Share via:

John Baker

2004-Jan-22 22:38 UTC

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

With my thanks to Brian West and his offering in the thread,

"Subject: Re: [Asterisk-Users] Remote reload Cisco 7960"

I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones

PolyReboot.pl takes an IP address as a single argument and reboots the
phone.

You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg - all
lower case.  Further,
you need to use ftp for your remote cfg loading, because with ftp
synchronization, the phones
check the ctimes of the cfg files against what's in their cache when
receiving a check-sync in
order to determine if rebooting is necessary.

I tested this script.  It works on my Polycoms.  I have the latest bootrom
and the
SIP 1.1.0 software version.

I'm not much of a perl person, and all of this code is heavily borrowed,
(Thanks again, Brian), so
someone else can prettify it as they see fit.

#!/usr/bin/perl
#
# PolyReboot.pl
#
# Reboots a Polycom 500 or 600 phone
#
use Net::Ping;
use Socket;

$polycompath = '/home/poly/';    # Where you keep your config files
$arp         = '/sbin/arp';          # Location of arp command
$sipserver   = '192.168.XXX.XXX';      # IP of asterisk server

$phone = shift;

checkphone("$phone");
touch( arp2config("$phone") );

reboot_sip_phone( "$phone", "$sipserver", "Reboot"
);

sub checkphone {  # Checks for existence of phone, makes sure
                            # it's in arp table
    $activephone = shift;

    # ARP table needs our phone
    print "Checking ARP table.\n";
    $p = Net::Ping->new("icmp");
    if ( $p->ping( $activephone, 2 ) ) {
        print "$activephone is ";
        print "reachable.\n";
    }
    else { die "Polycom at ", $activephone, " is not
reachable!"; }
    sleep(1);
    $p->close();

}

sub arp2config {    # Gets mac address from arp table, converts
                    # to a polycom config filename, makes sure
                    # the config file exists
    $arpip = shift;
    open( ARP, "$arp -an|" ) || die "Couldn't open arp table:
$!\n";
    print "checking for polycom config name...", "\n";
    while (<ARP>) {
        chomp;
        $addr = $_;
        $ip   = $_;
        $addr =~ s/.*
([\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+).*/$1/;
        $addr =~ s/://g;
        $addr = lc($addr) . '.cfg';
        $ip =~ s/.*?(\d+\.\d+\.\d+\.\d+).*/$1/;
        if ( $ip eq $arpip ) {
            last;
        }
    }
 $polycomconfig = "$polycompath" . "$addr";

    unless ( -e "$polycomconfig" ) {
        print "sorry, polycom config file ",
"$polycomconfig",
          " is not found.\n\n";
        exit;
    }

    return $polycomconfig;
}

    }

    $polycomconfig = "$polycompath" . "$addr";

    unless ( -e "$polycomconfig" ) {
        print "sorry, polycom config file ",
"$polycomconfig",
          " is not found.\n\n";
        exit;
    }

    return $polycomconfig;
}

sub touch {    # We need to touch the config file or the phone
               # won't reboot - it depends on time synchronization
    print "touching config file ", $polycomconfig, "\n";
    my $now = time;
    local (*TMP);
    foreach my $file (@_) {
        utime( $now, $now, $file )
          || open( TMP, ">>$file" )
          || die ("$0: Couldn't touch file: $!\n");
    }
}

sub reboot_sip_phone {    # Send the phone a check-sync to reboot it
    $phone_ip = shift;

    $local_ip = shift;
    $sip_to   = shift;
    $sip_from = "0";
    $tm       = time();
    $call_id  = $tm . "msgto$sip_to";
    $httptime = `date -R`;
    $MESG     = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
Via: SIP/2.0/UDP $local_ip
From: <sip:$sip_from\@$local_ip>
To: <sip:$sip_to\@$phone_ip>
Event: check-sync
Date: $httptime
Call-ID: $call_id\@$local_ip
CSeq: 1300 NOTIFY
Contact: <sip:$sip_from\@$local_ip>
Content-Length: 0

";

    $proto = getprotobyname('udp');
    socket( SOCKET, PF_INET, SOCK_DGRAM, $proto );
    $iaddr = inet_aton("$phone_ip");
    $paddr = sockaddr_in( 5060, $iaddr );
    bind( SOCKET, $paddr );
    $port = 5060;

    $hisiaddr = inet_aton($phone_ip);
    $hispaddr = sockaddr_in( $port, $hisiaddr );

    if ( send( SOCKET, $MESG, 0, $hispaddr ) ) {
        print "reboot of phone ", "$phone_ip", " was
successful", "\n";
    }
    else { print "reboot of phone ", "$phone_ip", "
failed", "\n"; }
}
exit;

Enjoy,

John

John Baker

2004-Jan-22 23:00 UTC

head link

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

Oops, the cut and paste got the better of me.

This one might be a little better...

#!/usr/bin/perl
#
# PolyReboot.pl
#
# Reboots a Polycom 500 or 600 phone
#
use Net::Ping;
use Socket;

$polycompath = '/home/poly/';    # Where you keep your config files
$arp         = '/sbin/arp';          # Location of arp command
$sipserver   = '192.168.XXX.XXX';      # IP of asterisk server

$phone = shift;

checkphone("$phone");
touch( arp2config("$phone") );

reboot_sip_phone( "$phone", "$sipserver", "Reboot"
);

sub checkphone {  # Checks for existence of phone, makes sure
                             # it's in arp table
     $activephone = shift;

     # ARP table needs our phone
     print "Checking ARP table.\n";
     $p = Net::Ping->new("icmp");
     if ( $p->ping( $activephone, 2 ) ) {
         print "$activephone is ";
         print "reachable.\n";
     }
     else { die "Polycom at ", $activephone, " is not
reachable!"; }
     sleep(1);
     $p->close();

 }

 sub arp2config {    # Gets mac address from arp table, converts
                     # to a polycom config filename, makes sure
                     # the config file exists
     $arpip = shift;
     open( ARP, "$arp -an|" ) || die "Couldn't open arp
table: $!\n";
     print "checking for polycom config name...", "\n";
     while (<ARP>) {
         chomp;
         $addr = $_;
         $ip   = $_;
         $addr =~ s/.*
([\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+).*/$1/;
         $addr =~ s/://g;
         $addr = lc($addr) . '.cfg';
         $ip =~ s/.*?(\d+\.\d+\.\d+\.\d+).*/$1/;
         if ( $ip eq $arpip ) {
             last;
         }
     }
  $polycomconfig = "$polycompath" . "$addr";

     unless ( -e "$polycomconfig" ) {
         print "sorry, polycom config file ",
"$polycomconfig",
           " is not found.\n\n";
         exit;
     }

     return $polycomconfig;
 }


 sub touch {    # We need to touch the config file or the phone
                # won't reboot - it depends on time synchronization
     print "touching config file ", $polycomconfig, "\n";
     my $now = time;
     local (*TMP);
     foreach my $file (@_) {
         utime( $now, $now, $file )
           || open( TMP, ">>$file" )
           || die ("$0: Couldn't touch file: $!\n");
     }
 }

 sub reboot_sip_phone {    # Send the phone a check-sync to reboot it
     $phone_ip = shift;

     $local_ip = shift;
     $sip_to   = shift;
     $sip_from = "0";
     $tm       = time();
     $call_id  = $tm . "msgto$sip_to";
     $httptime = `date -R`;
     $MESG     = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
 Via: SIP/2.0/UDP $local_ip
 From: <sip:$sip_from\@$local_ip>
 To: <sip:$sip_to\@$phone_ip>
 Event: check-sync
 Date: $httptime
 Call-ID: $call_id\@$local_ip
 CSeq: 1300 NOTIFY
 Contact: <sip:$sip_from\@$local_ip>
 Content-Length: 0

 ";

     $proto = getprotobyname('udp');
     socket( SOCKET, PF_INET, SOCK_DGRAM, $proto );
     $iaddr = inet_aton("$phone_ip");
     $paddr = sockaddr_in( 5060, $iaddr );
     bind( SOCKET, $paddr );
     $port = 5060;

     $hisiaddr = inet_aton($phone_ip);
     $hispaddr = sockaddr_in( $port, $hisiaddr );

     if ( send( SOCKET, $MESG, 0, $hispaddr ) ) {
         print "reboot of phone ", "$phone_ip", " was
successful", "\n";
     }
     else { print "reboot of phone ", "$phone_ip", "
failed", "\n"; }
 }
 exit;

----- Original Message ----- 
From: "John Baker" <johnb@listbrokers.com>
To: <asterisk-users@lists.digium.com>
Sent: Thursday, January 22, 2004 11:38 PM
Subject: [Asterisk-Users] Polycom Reboot Script - Please wiki-size me

> With my thanks to Brian West and his offering in the thread,
>
> "Subject: Re: [Asterisk-Users] Remote reload Cisco 7960"
>
> I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones
>
> PolyReboot.pl takes an IP address as a single argument and reboots the
> phone.
>
> You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg -
all> lower case.  Further,
> you need to use ftp for your remote cfg loading, because with ftp
> synchronization, the phones
> check the ctimes of the cfg files against what's in their cache when
> receiving a check-sync in
> order to determine if rebooting is necessary.
>
> I tested this script.  It works on my Polycoms.  I have the latest bootrom
> and the
> SIP 1.1.0 software version.
>
> I'm not much of a perl person, and all of this code is heavily
borrowed,
> (Thanks again, Brian), so
> someone else can prettify it as they see fit.
>
> #!/usr/bin/perl
> #
> # PolyReboot.pl
> #
> # Reboots a Polycom 500 or 600 phone
> #
> use Net::Ping;
> use Socket;
>
> $polycompath = '/home/poly/';    # Where you keep your config files
> $arp         = '/sbin/arp';          # Location of arp command
> $sipserver   = '192.168.XXX.XXX';      # IP of asterisk server
>
> $phone = shift;
>
> checkphone("$phone");
> touch( arp2config("$phone") );
>
> reboot_sip_phone( "$phone", "$sipserver",
"Reboot" );
>
> sub checkphone {  # Checks for existence of phone, makes sure
>                             # it's in arp table
>     $activephone = shift;
>
>     # ARP table needs our phone
>     print "Checking ARP table.\n";
>     $p = Net::Ping->new("icmp");
>     if ( $p->ping( $activephone, 2 ) ) {
>         print "$activephone is ";
>         print "reachable.\n";
>     }
>     else { die "Polycom at ", $activephone, " is not
reachable!"; }
>     sleep(1);
>     $p->close();
>
> }
>
> sub arp2config {    # Gets mac address from arp table, converts
>                     # to a polycom config filename, makes sure
>                     # the config file exists
>     $arpip = shift;
>     open( ARP, "$arp -an|" ) || die "Couldn't open arp
table: $!\n";
>     print "checking for polycom config name...", "\n";
>     while (<ARP>) {
>         chomp;
>         $addr = $_;
>         $ip   = $_;
>         $addr =~ s/.*
> ([\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+).*/$1/;
>         $addr =~ s/://g;
>         $addr = lc($addr) . '.cfg';
>         $ip =~ s/.*?(\d+\.\d+\.\d+\.\d+).*/$1/;
>         if ( $ip eq $arpip ) {
>             last;
>         }
>     }
>  $polycomconfig = "$polycompath" . "$addr";
>
>     unless ( -e "$polycomconfig" ) {
>         print "sorry, polycom config file ",
"$polycomconfig",
>           " is not found.\n\n";
>         exit;
>     }
>
>     return $polycomconfig;
> }
>
>
> sub touch {    # We need to touch the config file or the phone
>                # won't reboot - it depends on time synchronization
>     print "touching config file ", $polycomconfig,
"\n";
>     my $now = time;
>     local (*TMP);
>     foreach my $file (@_) {
>         utime( $now, $now, $file )
>           || open( TMP, ">>$file" )
>           || die ("$0: Couldn't touch file: $!\n");
>     }
> }
>
> sub reboot_sip_phone {    # Send the phone a check-sync to reboot it
>     $phone_ip = shift;
>
>     $local_ip = shift;
>     $sip_to   = shift;
>     $sip_from = "0";
>     $tm       = time();
>     $call_id  = $tm . "msgto$sip_to";
>     $httptime = `date -R`;
>     $MESG     = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
> Via: SIP/2.0/UDP $local_ip
> From: <sip:$sip_from\@$local_ip>
> To: <sip:$sip_to\@$phone_ip>
> Event: check-sync
> Date: $httptime
> Call-ID: $call_id\@$local_ip
> CSeq: 1300 NOTIFY
> Contact: <sip:$sip_from\@$local_ip>
> Content-Length: 0
>
> ";
>
>     $proto = getprotobyname('udp');
>     socket( SOCKET, PF_INET, SOCK_DGRAM, $proto );
>     $iaddr = inet_aton("$phone_ip");
>     $paddr = sockaddr_in( 5060, $iaddr );
>     bind( SOCKET, $paddr );
>     $port = 5060;
>
>     $hisiaddr = inet_aton($phone_ip);
>     $hispaddr = sockaddr_in( $port, $hisiaddr );
>
>     if ( send( SOCKET, $MESG, 0, $hispaddr ) ) {
>         print "reboot of phone ", "$phone_ip", "
was successful", "\n";
>     }
>     else { print "reboot of phone ", "$phone_ip",
" failed", "\n"; }
> }
> exit;
>
> Enjoy,
>
> John
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

mattf

2004-Jan-23 07:23 UTC

head link

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

It's been added to the wiki:

http://www.voip-info.org/tiki-index.php?page=Polycom+reboot+hardphone+script

MATT---

-----Original Message-----
From: John Baker [mailto:johnb@listbrokers.com]
Sent: Friday, January 23, 2004 12:38 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Polycom Reboot Script - Please wiki-size me


With my thanks to Brian West and his offering in the thread,

"Subject: Re: [Asterisk-Users] Remote reload Cisco 7960"

I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones

PolyReboot.pl takes an IP address as a single argument and reboots the
phone.

You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg - all
lower case.  Further,
you need to use ftp for your remote cfg loading, because with ftp
synchronization, the phones
check the ctimes of the cfg files against what's in their cache when
receiving a check-sync in
order to determine if rebooting is necessary.

I tested this script.  It works on my Polycoms.  I have the latest bootrom
and the
SIP 1.1.0 software version.

I'm not much of a perl person, and all of this code is heavily borrowed,
(Thanks again, Brian), so
someone else can prettify it as they see fit.

#!/usr/bin/perl
#
# PolyReboot.pl
#
# Reboots a Polycom 500 or 600 phone
#
use Net::Ping;
use Socket;

$polycompath = '/home/poly/';    # Where you keep your config files
$arp         = '/sbin/arp';          # Location of arp command
$sipserver   = '192.168.XXX.XXX';      # IP of asterisk server

$phone = shift;

checkphone("$phone");
touch( arp2config("$phone") );

reboot_sip_phone( "$phone", "$sipserver", "Reboot"
);

sub checkphone {  # Checks for existence of phone, makes sure
                            # it's in arp table
    $activephone = shift;

    # ARP table needs our phone
    print "Checking ARP table.\n";
    $p = Net::Ping->new("icmp");
    if ( $p->ping( $activephone, 2 ) ) {
        print "$activephone is ";
        print "reachable.\n";
    }
    else { die "Polycom at ", $activephone, " is not
reachable!"; }
    sleep(1);
    $p->close();

}

sub arp2config {    # Gets mac address from arp table, converts
                    # to a polycom config filename, makes sure
                    # the config file exists
    $arpip = shift;
    open( ARP, "$arp -an|" ) || die "Couldn't open arp table:
$!\n";
    print "checking for polycom config name...", "\n";
    while (<ARP>) {
        chomp;
        $addr = $_;
        $ip   = $_;
        $addr =~ s/.*
([\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+:[\d\w]+).*/$1/;
        $addr =~ s/://g;
        $addr = lc($addr) . '.cfg';
        $ip =~ s/.*?(\d+\.\d+\.\d+\.\d+).*/$1/;
        if ( $ip eq $arpip ) {
            last;
        }
    }
 $polycomconfig = "$polycompath" . "$addr";

    unless ( -e "$polycomconfig" ) {
        print "sorry, polycom config file ",
"$polycomconfig",
          " is not found.\n\n";
        exit;
    }

    return $polycomconfig;
}

    }

    $polycomconfig = "$polycompath" . "$addr";

    unless ( -e "$polycomconfig" ) {
        print "sorry, polycom config file ",
"$polycomconfig",
          " is not found.\n\n";
        exit;
    }

    return $polycomconfig;
}

sub touch {    # We need to touch the config file or the phone
               # won't reboot - it depends on time synchronization
    print "touching config file ", $polycomconfig, "\n";
    my $now = time;
    local (*TMP);
    foreach my $file (@_) {
        utime( $now, $now, $file )
          || open( TMP, ">>$file" )
          || die ("$0: Couldn't touch file: $!\n");
    }
}

sub reboot_sip_phone {    # Send the phone a check-sync to reboot it
    $phone_ip = shift;

    $local_ip = shift;
    $sip_to   = shift;
    $sip_from = "0";
    $tm       = time();
    $call_id  = $tm . "msgto$sip_to";
    $httptime = `date -R`;
    $MESG     = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
Via: SIP/2.0/UDP $local_ip
From: <sip:$sip_from\@$local_ip>
To: <sip:$sip_to\@$phone_ip>
Event: check-sync
Date: $httptime
Call-ID: $call_id\@$local_ip
CSeq: 1300 NOTIFY
Contact: <sip:$sip_from\@$local_ip>
Content-Length: 0

";

    $proto = getprotobyname('udp');
    socket( SOCKET, PF_INET, SOCK_DGRAM, $proto );
    $iaddr = inet_aton("$phone_ip");
    $paddr = sockaddr_in( 5060, $iaddr );
    bind( SOCKET, $paddr );
    $port = 5060;

    $hisiaddr = inet_aton($phone_ip);
    $hispaddr = sockaddr_in( $port, $hisiaddr );

    if ( send( SOCKET, $MESG, 0, $hispaddr ) ) {
        print "reboot of phone ", "$phone_ip", " was
successful", "\n";
    }
    else { print "reboot of phone ", "$phone_ip", "
failed", "\n"; }
}
exit;

Enjoy,

John

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reasonably Related Threads

Search for more reasonably related threads

asterisk users - Jan 2004 - Polycom Reboot Script - Please wiki-size me

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

[Asterisk-Users] Polycom Reboot Script - Please wiki-size me

Reasonably Related Threads