similar to: CyberPower 1500AVR UPS configuration

Hello all, I have a Salicru UPS (Salicru SPS One 700VA) working great in Debian Wheezy, but I want to move it to a OpenWRT router. I configured same as in Debian but I can not get it working: # upsd Network UPS Tools upsd 2.6.5 fopen /var/run/upsd.pid: No such file or directory listening on 192.168.1.240 port 3493 /etc/nut/ is world readable Can't connect to UPS [salicru]

Not of a big help here, but I think it's a voltronic power vesta 650: http://www.voltronicpower.com/oCart2/index.php?route=product/product&path=37&product_id=52 If that is the case, it should work both with the blazer drivers (i.e. all but the shutdown sequence) and with the now defunct voltronic ones. With arno's words: "We are currently merging a new driver to replace

On Nov 8, 2013, at 3:23 AM, Josu Lazkano wrote: > Hello, I have a Salicru SPS One 700VA device, I want to manage it with > Debian Whezzy. > > I read some information in the net about how to configure but I can > not get it working. I'm assuming you mean this blog post? http://blog.ciberterminal.net/2013/04/28/ups-salicru-en-nut/ > Could you help with this? > >

I have a device that seems almost, but not quite supported, I'd like very much to help get it working, though I am no programmer. Feel free to ask me to test :) This could probably go in https://networkupstools.org/ddl/ : -------file: Salicru__SPS_2000_ADV_T__usbhid-ups__2.8.1-94-gd59c05349__01.dev , or maybe 1__2000__usbhid-ups__2.8.1-94-gd59c05349__01.dev # DEVICE:URL:VENDOR:

Hello, I wanted to send an email to the administrator of the web to update an information, I do not know if this mailing list is appropriate. I just wanted to say that I have a UPS SALICRU SOHO + 1600VA and after several days trying to configure it I found out the problem. This UPS has usb 1.0 HID, so it does not work with the driver usb blazer if you have to use the driver usbhid-ups. I think

Hello list, I have a "Salicru SPS One 700VA" in a Debian Wheezy server. I configured a week ago, it works well, but today it start to show "UPS salicru at 192.168.x.x:3493 is unavailable" And I got this in the system logs: # dmesg [147080.501925] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 128 rq 6 len 255 ret -62 [147080.503913] usb 4-5: usbfs:

Hello, I have a Salicru SPS One 700VA device, I want to manage it with Debian Whezzy. I read some information in the net about how to configure but I can not get it working. Could you help with this? This is the log when I connect the USB: [ 3194.688204] usb 4-4: new low-speed USB device number 2 using ohci_hcd [ 3194.857239] usb 4-4: New USB device found, idVendor=0665, idProduct=5161 [

On Feb 8, 2015, at 2:29 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > # upsd > Network UPS Tools upsd 2.6.5 > fopen /var/run/upsd.pid: No such file or directory > listening on 192.168.1.240 port 3493 > /etc/nut/ is world readable > Can't connect to UPS [salicru] (blazer_usb-salicru): No such file or directory Check the messages from the blazer_usb driver when

Thanks Charles, This is the permission tree: # ls -l /dev/bus/usb/001/001 crw-r--r-- 1 root root 189, 0 Feb 8 20:23 /dev/bus/usb/001/001 If I attache the USB cable there is nothing in dmesg, and there is nothing in lsusb: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It looks like it is not detected. In Debian it looks great: # lsusb Bus 004 Device

I would also be very interested in this topic. Best Regards, Bart pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <marc.franquesa at gmail.com> napisał: > Sorry, because this is not a technical question rather than a Hardware > advice/recommendation. > > I have been using NUT-UPS perfectly for more than 7 years using two > different Eaton/MGE models. > > After a

Thanks all for the quick responses on the question (always a good sign of this mailing list). (Tim Dawson, Manuel Wolfshant): Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it. However I made a simple test with the vendor tools (Windows) and didn't found any issue, as well as they discharged normally (although only

On Aug 19, 2020, at 6:22 AM, Manuel Wolfshant wrote: > > On 8/19/20 12:55 PM, Marc Franquesa wrote: >> Thanks all for the quick responses on the question (always a good sign of this mailing list). >> >> (Tim Dawson, Manuel Wolfshant): >> Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it.

My experience on situations like this is that it is almost always a bad battery.  Once load is removed, the voltage bounced back, and thus you show time/capacity, but it's possible that the sag under load drops you into LB, and causes the shutdown. If the UPS has a battery test, give it a try, or load test the battery external to the UPS if you can - I suspect that the UPS will be fine,

Hi all. I'm under Ubuntu 7.10 server I use a SALICRU UPS Advance I install nut and nut-usb, write some config files, but i cannot connect to UPS. At ups.conf i wrote: [salicru] driver = newhidups port = auto desc = "Desc" But if try to make "sudo upsdrvctl start" it said: No matchin HID UPS found If i write "lsusb" appears: Bus 001: Device 007: Id

I have a possibility of acquiring a 6KVA UPS made the Spanish comapny Salicru - it's fairly cheap, but weighs about 350kg, so before I go any further, I'd like to hear if anyone's got any experience with this make? /Per Jessen, Z?rich

Hello, I have a Salicru UPS in a Debian Wheezy connected with a USB HUB: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ... Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial The problem is that I have some failed messages: # dmesg ... [90941.136274] usb 1-3.7: usbfs:

Sorry, because this is not a technical question rather than a Hardware advice/recommendation. I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models. After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although

Hi, my name is Sebasti?n from Spain I need help for that. I have 2 salicru ups I need monitor with a fedora 14 pc. Someone knows if i can configure ups.conf to monitor one or another ups? only make a upsc "ups" for take data. The upses are connected via usb and nut always read the first one connected. The upses are the same model. Thanks for all! Sebasti?n Le?n del Moral urticaries at

Veo que hay gente que habla castellano! ok! les paso a contar lo que hice: Directamente fui al site y baj? la ultima version, que se muestra arriba a la derecha, o sea los fuentes. ACLARO QUE NO SOY EXPERTO EN LINUX NI MUCHO MENOS, aunque hace mas de 7 a?os que voy y vengo.... jajaja desempaquet? todo, segui las instrucciones del readme, fui a tools, ejecut? el instalador, luego me comenzo a

I have a CyberPower 1500AVR LCD connected by USB to an up-to-date Debian Testing box running nut 2.4.3. /etc/nut/ups.conf contains the following information: [myups] driver = usbhid-ups port = auto When I run upsdrvctl start I receive the following output: Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication