similar to: "Battery constant" value for APC UPS

I have a SmartUPS 750 (SUA750) which has the temperature and humidity SmartSlot card installed. When NUT 2.2 communicates with this UPS over /dev/ttyS0 using apcsmart, using the APC Smart cable connected to the SUA750 serial port, and this ups.conf: [su700] driver=apcsmart port = /dev/ttyS0 I can see the ambient temperature and humidity data with "upsc su700 at

I''m new to RoR and working on a migration of project developed by another team. I''m using Rails version (3.2.13) and my bundle install works successfully. However while running "rails server", I get the error below. Any suggestions are most appreciated. Thanks! -------------- rails server output --------------

That's problem. AHCI is the standard for SATA, running modern SATA drives, especially SSD require the AHCI command structure. Running modern SATA drives in IDE (ATA) mode is not readily supported. -Jason -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc.

Hi all, In light of issue #2666 ( https://github.com/networkupstools/nut/issues/2666#issue-2623441838), I "sniffed" USB traffic from APC's `PowerChute Serial Shutdown` software (with the help of this guide (https://www.youtube.com/watch?v=0MC-D_oNzbk)). I hope to be able to find out the shutdown command for my APC "Back-UPS BX750MI FW:295202G -302202G". APC's

Hi, could someone pelase help me with this? My data set's name is db1(say) and one of the variables is var1. I gave the command: hist(db1$var1). The values of Var1 are numbers. I got an error which says: 'x' must be numeric. Sometimes it works for other datasets and it's not working for this dataset. Also, does R let us import data from an excel spreadhsheet? Thanks, Radha

Hi, [ There is also a github issue about this here: https://github.com/networkupstools/nut/issues/2347 ] I have an APC Back-UPS BX1600MI purchased in January, attached by its supplied USB cable to a Debian 10 machine. Initially using the nut packaged in Debian 10 (2.7.4-8) this was unusable as the usbhid-ups driver kept disconnecting every few seconds. I upgraded to the git HEAD of nut and

I have two serial-related questions (1) What is the CentOS (or *nix) equivalent of Hyperterminal in Windows? Sometimes I'm on a CentOS box and need to, say, console into a Cisco or something. and (2) I have a CentOS server that I may need to transport somewhere and will most likely *not* want to carry around the monitor. Where should I look in connecting to my server via a serial

The 'console' port or RS232 port is used to connect the 7914 sidecar, which does not work with the SIP firmware. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Rich Adamson Sent: Thursday, December 16, 2004 12:10 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Le Tue, 16 Dec 2014 20:38:50 -0500 Charles Lepple <clepple at gmail.com> ?crivait: > On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > > > Bye the way I just realize that I can't retrieve the ups.load, among other > > thing :-( > > To the best of my knowledge, Microlink is not supported by any third-party tools

Maybe it's just me, but I get the impression that Grandstream is quite uncooperative. We (and others) have asked them multiple times to make the call- pickup code ("**") configurable but either they don't understand the request or they're unwilling to do anything about it. http://forums.grandstream.com/node/2848 http://forums.grandstream.com/node/709 Unfortunately their

Hello. We've got an APC Symmetra with a network management card. We'd like to run Powerchute Network Shutdown on some of our older Linux servers, but no dice. I'm wondering if anyone has found a way to make NUT work with the network mangement card (it's a TCP connection, not SNMP or cable), or knows of any alternate PCNS clients Also, I was wondering if anyone on the list has

I have to reinit a firewall that can only be done from its console port, and I do not have an XP system with Hyperterminal on it. So I went through the archive and learned that minicom could do the job for me. I installed it and went to configure it (minicom -s). I can set the speeds, but the challenge is selecting the serial device. I have a Serial-to-USB dongle, and when I connect it,

I have a network with two older systems protected by APC UPSs. Both systems run OS/2 and will continue to do so. Both systems have APC PowerChute Plus 4.2.3 installed and I can use that software to monitor and control both systems. I am also now running several linux systems, in fact I spend almost all my time on the linux systems and these OS/2 systems are servers running in the

Hi, Iam using cento-5.3 on x86 machine and iam working to get the console messages redirected to serial port. I have made the necessary changes in the /etc/inittab file. - - - - - id:3:initdefault . . so:12345:respawn:/sbin/agetty ttyS0 9600 vt100 - - - -- - and also in /etc/grub.conf file - - - - serial --speed=9600 --unit=0 --word=8 --parity=no --stop=1 terminal --timeout=10 serial . .

Sorry to have had to post this, But I need urgent help with configuring one adit 600 I picked up from e-bay. Issues. I cannot access the console port, I am using HyperTerminal with settings VT100, 9600, 8-N-1 I also do not have any user-manual so I am kind of stuck. Any help in getting me started would be really appreciated. Any default settings like Ethernet port address, that can help me

Hello, I'd like to prevent my servers from rebooting when power comes back after a power failure. With powerchute (which I used before), there is an "automatic reboot" parameter. Is there an equivalent with nut ? Regards -- Frantz de Germain Web : http://www.info.univ-angers.fr/pub/frantz Membre de la Soci?t? d'Astronomie de Nantes : http://www.san-fr.com/

Hi, I run os x yosemite and found out about NUT tonight. I messed around with fink and macports but get stuck very soon. I dont know how to install anything that doesnt have a .dmg or .pkg installer. Does anyone have a step by step (written in "for dummies" format on how to get this all to work? Just looking for a PowerChute alternative that actually lets me control and monitor my

On Dec 17, 2014, at 3:46 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > This seems to me a little bit complicated :-( Instead, can I use the > apcsmart driver with the provided 940-0625a c?ble (RJ45/DB9 connectors) ? Or > do I need to acquire an AP9620 SmartSlot expansion card, as I've seen in the > Hardware compatibility list page ? It sounds like you might

'lo, UPS model: APC Back-UPS BR 800 (supplied by Dell) My USB connection: Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 # upsc desk@localhost|grep load ups.load: 0.0 This UPS has 2 pc's and some minor other gear connected, yet the load stays at 0.0 when checking with nut. driver.version: 2.0.5 driver.version.data: APC/CyberPower HID 0.9

hi guys, found this logs on my mail server about possible fraud attempt and phising. is this normal ? Found ip-based phishing fraud from 10.2.0.0 Found ip-based phishing fraud from 255.255.255.255 Found ip-based phishing fraud from 10.1.0.0 Found ip-based phishing fraud from 255.255.255.255 . MailScanner has detected a possible fraud attempt from "ee.ee.ee.ee" claiming to be