Sorry to have had to post this, But I need urgent help with configuring one adit 600 I picked up from e-bay. Issues. I cannot access the console port, I am using HyperTerminal with settings VT100, 9600, 8-N-1 I also do not have any user-manual so I am kind of stuck. Any help in getting me started would be really appreciated. Any default settings like Ethernet port address, that can help me connect to this Box. Anything at all Jon, Any Idea from you as well ? thanks bst rgds Etoenyo Ntumi -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050223/e110df81/attachment.htm
On February 23, 2005 06:57 am, Etoenyo Ntumi wrote:> Sorry to have had to post this, But I need urgent help with configuring > one adit 600 I picked up from e-bay.Sorry we don't provide urgent help here. That we charge for. Don't leave things to the absolute last minute and then ask for immediate assistance due to your lack of planning. You had at least a few days from the time you paid for it until the courier shipped it, what were you doing during that time?> Issues. I cannot access the console port, I am using HyperTerminal with > settings VT100, 9600, 8-N-1Are you using a regular or null modem cable? You need a regular one. Does your serial port work? i.e. if you short out pins 2 and 3 on the cable do you see what you're typing? They're not difficult ot set up at all, but you do need working equipment. :-) Also, carrier access has an incredible support site that they do not charge for. You do need to register with them but that's free. -A.
;) thanks Andrew, and I do take the reprimand in good faith. I am using the Usual Cisco type roll-over cable. When you say "regular" do you mean straight through ?, and can you kindly confirm for me if the HyperTerminal settings I am using are OK?. I am definitely not using a null-modem cable, and yes the port works cos I use it every day on various Cisco gear I have called Carrier Access, I am just waiting for them to get in to the office, so I can register, any help in the mean time is still very much appreciated though thanks bst rgds Etoenyo Ntumi -----Original Message----- From: Andrew Kohlsmith [mailto:akohlsmith-asterisk@benshaw.com] Sent: Wednesday, February 23, 2005 7:23 AM To: 'asterisk-users@lists.digium.com' Subject: Re: [Asterisk-Users] Help With Adit 600 Configuration On February 23, 2005 06:57 am, Etoenyo Ntumi wrote:> Sorry to have had to post this, But I need urgent help with configuring > one adit 600 I picked up from e-bay.Sorry we don't provide urgent help here. That we charge for. Don't leave things to the absolute last minute and then ask for immediate assistance due to your lack of planning. You had at least a few days from the time you paid for it until the courier shipped it, what were you doing during that time?> Issues. I cannot access the console port, I am using HyperTerminal with > settings VT100, 9600, 8-N-1Are you using a regular or null modem cable? You need a regular one. Does your serial port work? i.e. if you short out pins 2 and 3 on the cable do you see what you're typing? They're not difficult ot set up at all, but you do need working equipment. :-) Also, carrier access has an incredible support site that they do not charge for. You do need to register with them but that's free. -A. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050223/37c0b270/attachment.htm
Thanks Guys, Straight through cable works just fine. bst rgds Etoenyo Ntumi -----Original Message----- From: Etoenyo Ntumi Sent: Wednesday, February 23, 2005 7:51 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Help With Adit 600 Configuration ;) thanks Andrew, and I do take the reprimand in good faith. I am using the Usual Cisco type roll-over cable. When you say "regular" do you mean straight through ?, and can you kindly confirm for me if the HyperTerminal settings I am using are OK?. I am definitely not using a null-modem cable, and yes the port works cos I use it every day on various Cisco gear I have called Carrier Access, I am just waiting for them to get in to the office, so I can register, any help in the mean time is still very much appreciated though thanks bst rgds Etoenyo Ntumi -----Original Message----- From: Andrew Kohlsmith [mailto:akohlsmith-asterisk@benshaw.com] Sent: Wednesday, February 23, 2005 7:23 AM To: 'asterisk-users@lists.digium.com' Subject: Re: [Asterisk-Users] Help With Adit 600 Configuration On February 23, 2005 06:57 am, Etoenyo Ntumi wrote:> Sorry to have had to post this, But I need urgent help with configuring > one adit 600 I picked up from e-bay.Sorry we don't provide urgent help here. That we charge for. Don't leave things to the absolute last minute and then ask for immediate assistance due to your lack of planning. You had at least a few days from the time you paid for it until the courier shipped it, what were you doing during that time?> Issues. I cannot access the console port, I am using HyperTerminal with > settings VT100, 9600, 8-N-1Are you using a regular or null modem cable? You need a regular one. Does your serial port work? i.e. if you short out pins 2 and 3 on the cable do you see what you're typing? They're not difficult ot set up at all, but you do need working equipment. :-) Also, carrier access has an incredible support site that they do not charge for. You do need to register with them but that's free. -A. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050223/41966060/attachment.htm