similar to: Best driver for MGE Pulsar Evolution 1100

I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the mge-utalk (serial) driver on NetBSD 3.1 . I had a very strange occurance in my basement datacenter this early AM. the following was logged by upslog: 20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00 20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00 20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00 20080219 023622

Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'

Hello, I'm using an MGE Evolution 1500 with a Debian Sarge 2.4.27 smp server. NUT is using the mge-utalk driver. [ups1500] driver = mge-utalk port = /dev/ttyS0 Seens I did a test.battery.start, my UPS goes off (beep!) once per week (same day, same hour). I guess there should be a very easy explanation for this, unfortunatly, I haven't found it yet. I've tried to upgrade

Hi All, I have an mge pulsar esv 14+ rackmount UPS connected via straight through serial cable to a USB to serial adaptor (My motherboard does not have a native RS232 port). I am running Ubuntu Server 9.04 x64, and nut 2.4.1-2ubuntu4 installed via APT. I am getting the error: Poll UPS [ups1 at localhost] failed - Driver not connected My conf files: (ups.conf) [ups1] driver=mge-utalk

Hello, I recently had a failure with my old MGE ESV8 ups, it just died on me so I had to get a new one. I found a MGE ESV8+ cheap and everything seems to work fine with it except the communication with the computer. The old ESV8 (non +) worked fine with NUT after applying some patches I got from the mailing list, but I think they are in the source tree now. I'm using the same cable that

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

Hello, I'm trying to communicate with a MGE Pulsar STS 16 using nut under Linux, but I've had no luck so far. I haven't saw it supported in the doc, so if there's anything I can try... Thanks, Arnaud. -- Perso: http://launay.org/blog/ H?bergement: http://www.nocworld.com/

Hello My server with another UPS (MGE Pulsar Evolution2200 USB) is OK. All scripts work Is it possible to work with a UPS MGE CometExtrem 6 on serial port Which driver can I use ? I tried with mge-shut ou mge-utalk without any success when I start driver with upsdrvctl with mge-utalk I have (after a long time) Can't connect to UPS [MGE_cometEX] (mge-utalk-MGE_cometEX): No such

Dear Sirs, I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports). I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status I saw similar thread on mailing list with no

Hi, Apologies if this is a known problem. I have just joined the list and haven't done an exhaustive search of the archives. Also I am no UPS expert, so please excuse me if some of my terminology is poor. I use an MGE Pulsar Extreme 700C connected via RS232 to the linux server it powers. I have recently upgraded to a new linux distribution. Both new and old use 2.6 kernels, although

Hi, I find the following feature with MGE Pulsar evolution 2200: [root@hat ups]# /usr/sbin/upsd Network UPS Tools upsd 2.0.2 Connected to UPS [hat_PC_ups]: mge-utalk-ttyS0 Synchronizing........ giving up [root@hat ups]# upsc hat_PC_ups@localhost Error: Data stale Is there a way to make the sync part longer? After 5-10 seconds, however, things work fine: [root@hat ups]# upsc

Hi, I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the mge-shut driver but I'm having some problems. It appears to init OK but I can't, say, turn the outlets off, eg.. harrow:~>upsc mge@localhost battery.charge: 78 battery.charge.low: 20 battery.runtime: 05760 driver.name: mge-shut driver.parameter.port: /dev/cuad1 driver.version: 2.0.3 driver.version.internal: 0.65

(Sorry, I accidentally discarded the wrong message in the moderation queue - please subscribe to the list to avoid this in the future.) > From: <onyx at netfusion.fr> > Subject: [HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver > Date: December 22, 2011 12:15:16 AM EST > To: <nut-upsuser at lists.alioth.debian.org> > > > Hi everybody, > > It

Ah, the perils of auto-upgrades. Last night, Fedora Core 3 upgraded my perfectly working nut installation to 2.0.2. I was informed of that because every xterm in the house (about 8 over a Linux box, two laptops and a G4 server) started beeping at 3:20am and didn't stop until I shut down nut. Keep in mind this configuration has been working for about two years. Here's the messages I get

> If you set lowbatt=70 then the behaviour you are seeing is normal. Don't > set lowbatt and you'll get the default manufacturer settings which is > LOWBATTERY at 30% charge level. > > Philippe Thanks for quick response! I realized this and forget this setting! For now I think that my box does not recognize signal about low battery - I'm only started to read SHUT

Hi, I've recently got a Raspberry Pi working with NUT and my MGE Pulsar ESV+, using the U-TALK driver, a USB Serial adapter and original cable. I've overcome the documented problems with these units and have it running, except for one little niggle! It's installed in central Europe, where the utility voltage is 240v, it's constantly in trim mode and pushing the voltage down to

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi everybody, Sorry for the eternity it took to solve the UTalk problems, but I've been busy on so many fronts... I've updated the CVS Testing tree, which will soon become 2.0.3 stable release, with mge-utalk 0.87. This release fixes the UTalk problems you have recently faced. If possible, please test it and report back if it work or not with your unit. To do so: 1) Retrieve the source

Hello all, I wonder if the improvements to a driver called "newmge-shut" which have been mentioned in October 06 got it to the 2.0.5 release? I tried my setup again with this release and still get this "communication lost -> established -> lost -> established" cycle. USB was not working because of the Solaris 8 installation. Regards, Ingo -------------- next part

Hi, I think my problem will be easy to resolve ... I don't understand why the ups return the value 2.000000 for all variables ... I've been looking for 1 hour on google and I can't find similar problem. Thank you David goburge ~ # /lib64/nut/newhidups -D /dev/ttyS0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '1' Detected a