Nut upsuser - Aug 2005 - MGE 2200, Synchronizing........ giving up

Hi,

I find the following feature with MGE Pulsar evolution 2200:

[root@hat ups]# /usr/sbin/upsd
Network UPS Tools upsd 2.0.2
Connected to UPS [hat_PC_ups]: mge-utalk-ttyS0
Synchronizing........ giving up

[root@hat ups]# upsc hat_PC_ups@localhost
Error: Data stale

Is there a way to make the sync part longer?

After 5-10 seconds, however, things work fine:

[root@hat ups]# upsc hat_PC_ups@localhost
battery.charge: 100.0
battery.charge.low: 30
battery.runtime: 01480
battery.voltage: 082.9
battery.voltage.nominal: 072.0
driver.name: mge-utalk
driver.parameter.port: /dev/ttyS0
driver.version: 2.0.2
driver.version.internal: 0.85
input.frequency: 60.00
input.transfer.boost.low: 102.0
input.transfer.high: 132.0
input.transfer.low: 102.0
input.transfer.trim.high: 132.0
input.voltage: 113.7
output.current: 004.7
output.voltage: 112.8
ups.delay.shutdown: 020
ups.delay.start: 001
ups.firmware: unknown
ups.id: Evolutio 2200 20
ups.load: 034.0
ups.mfr: MGE UPS SYSTEMS
ups.model: Evolution 2200
ups.status: BOOST BYPASS
ups.test.interval: 10080

Hi Gaspar,

fisrt of all, Evolution models (in serial mode) is supported
by both mge-shut and mge-utalk. As the later is the legacy
ASCII protocol, prefer the former.

So, thanks to retry with mge-shut and send back
the results.

If that doesn't work, send back your conf files,
system info and the output of "mge-shut -DDDDD -a hat_PC_ups".

Arnaud Quette
---
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
OpenSource Developer - http://arnaud.quette.free.fr/
Debian Developer - http://people.debian.org/~aquette/
 ... and much more ...