similar to: CyberPower Value 2200E-GP

Does the following error message have a specific meaning: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -75 I get two of these messages every time I run the following: /lib/nut/usbhid-ups -u root -DDD -a trippy The following is the output from the above command: debug level is '3' Checking device (0000/0000) (004/001) - VendorID: 0000 - ProductID:

I wrote a while back about the inability to kill the following command with anything but "kill -9" and the apparent high speed polling rate. # /lib/nut/usbhid-ups -u root -DDD -a trippy The setup I have worked on a previous version of nut, but I have forgotten at what point it stopped working. (I believe it was around Nov, 2007 that I noticed things were not working correctly.) I

Hello all, About a month ago Peter and Charles were kind enough to try to help me with getting a Tripp Lite USB UPS to work with NUT. I reported quite a bit of initial success, and then other things here fell apart. Between work, fence building and a week-long out of town business trip, I have had to drop this from my list of things to do lately. I am back at it, and I believe I will have

To all, I attempted to configure the UPS tools for the Tripp-Lite SmartOnline 1500VA 2U rackmount UPS. I followed the instructions from the 'upsdrvctl start' output and posted the diagnostic information below. Is my UPS using an unknown product ID as reported? From the mailing list archive, I have found another posting for the same UPS with device model '09AE/4003', whereas

OS name and version: FreeBSD 9.0-RELEASE amd64 exact NUT version: 2.6.1 NUT installation method: >From ports collection (cd /usr/ports/sysutils/nut; make install) Exact device name and related information: American Power Conversion/Back-UPS ES 525 FW:851.t2.I USB FW:t2 Complete problem description: /usr/local/etc/rc.d/nut start Network UPS Tools - UPS driver controller 2.6.1 Network UPS

Greetings everyone, Firstly, sorry for the huge length of this message. The support page said send debug traces, and so debug traces shall be sent. OS name and version - Arch Linux - updated today. exact NUT version - 2.7.4 (Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33) NUT installation method - Arch User Repository build script updated to use latest NUT

Hi, I'm trying to generate a skeleton driver with usbhid-ups and gen-usbhid-subdriver but the output seems to be incorrect. Same behavior with stable 2.6.5, so I guess there is something wrong with data coming out of device. I attached the output of usbhid-ups and gen-usbhid-subdriver from the commands: drivers/usbhid-ups -DD -u root -x explore -x vendorid=04d8 -a openups >&

Hello, I've recently bought Ippon Smart Winner 3000 New (note the "New" in the model name) and I can't make NUT to work with it. Linux gateway 3.17.8-gentoo-r1 #1 SMP Mon Feb 16 13:46:11 MSK 2015 x86_64 Intel(R) Celeron(R) CPU 1037U @ 1.80GHz GenuineIntel GNU/Linux Network UPS Tools 2.7.2 1) USB connection partially works using usbhid-ups driver, the problem is that I

It's been a while since I tried to use NUT, so I thought I would give it another try. Big trouble. The UPS is a Tripp-Lite AVR 550U. It has only a USB connector. The computer is running Red Hat Enterprise Linux 4. I just installed NUT version 2.2.0. I'm going through the steps in the INSTALL document. # cat ups.conf [igor] driver = usbhid-ups port = auto

Hello. Not listed as supported, so here is some info, [root at vhost ~]# /usr/sbin/usbhid-ups -DD -a powercom Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.001318 upsdrv_initups... 0.074753 Checking device (0529/0001) (003/002) 0.074835 Failed to open device, skipping. (Permission denied)

Hi, I have a HP R1500 G2 UPS and want to get it working under Debian Lenny - as this OS is not supported by HP I'm trying to use nut for it - but I can't get it working. Do I have any chance to get the UPS running with nut. I also tried different drivers but had no luck either. Or does anyone has experience with HP UPS under debian ? Any help would be nice ! I tried /lib/nut/usbhid-ups

I'm trying to set up nut-2.6 with a SMX1000 ups unit from APC on a CentOS 4.8 server. It's connected via USB, and Linux has detected it as a HID device. Nut was built from source code. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 21 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=051d ProdID=0003 Rev= 1.06 S: Manufacturer=American Power

Hi, With recent revision, it's impossible to get upsdrvctl started: [root at teevee nut]# /usr/local/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.3.0-1352 Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.3.0-1352) Warning: This is an experimental driver. Some features may not function correctly. Using subdriver: TrippLite HID 0.2 (experimental)

I've acquired and installed NUT 2.4.1 on a D-Link DNS323 NAS. With exception of Load and Battery Temp readings all works well. A upsc ups at localhost command returns; battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/06/05 battery.runtime: 2122 battery.runtime.low: 120 battery.temperature: 3022999999999998800 battery.type:

Hi I would like to be able to use this UPS with NUT please ? Product id = 53962KX Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.002761 upsdrv_initups... 0.014996 Checking device (03F0/0024) (001/005) 0.032670 - VendorID: 03f0 0.032790 - ProductID: 0024 0.032955 - Manufacturer:

When running 'sudo upsmon -c fsd' UPS turns off then back on after a delay as expected. But when power is disconnected and the command is ran, the UPS turns off but still turns back on again. Changing 'ondelay' to -1 or 0 does not change the behavior. How can I get the UPS load to stay turned off if there is no power? Or am I misunderstanding how to test this functionality?

Thanks for your help. From: Charles Lepple <clepple at gmail.com> Date: Mon, 18 Dec 2017 19:26:56 -0500 This may sound like an apples-to-oranges comparison, but we did uncover an issue with CyberPower UPSes where the delay values needed to be greater than or equal to 60 (seconds), since they were being rounded down to integer numbers of minutes internally: What was the largest

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

Hello to All. OS : FreeBSD NAS 9.1-STABLE FreeBSD 9.1-STABLE [uname -a] Version : Network UPS Tools upsd 2.6.5 [upsd -V] Installation method : build into FreeNAS 9 UPS : APC Back-UPS 500 BK500EI USB Today i install FreeNAS and try to connect to it my UPS APC Back-UPS 500 BK500EI via USB with no luck;/ If anyone can try to help me I would be grateful. My configs nut.conf : MODE=standalone

Apologies for resurrecting an old thread and likely poor formatting - I wasn't subscribed to the list at the time and have copied it out of the archives (http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-July/006104.html). I've been unable to locate any further progress on this UPS (Liebert 10af:0001) - a thread from 2009