similar to: Asterisk 1.8 broken MWI

1.6 UPGRADE.txt: > * If you use any interface for modifying voicemail aside from the built in > dialplan applications, then the option "pollmailboxes" *must* be set in > voicemail.conf for message waiting indication (MWI) to work properly. This > is because Voicemail notification is now event based instead of polling > based. The channel drivers are no longer

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

hi: our current connection is below: sip phone<--->asterisk<---->alcatel PBX<---->PSTN asterisk and alcatel PBX is connected via E1 isdn-pri. when I use sip phone to dial outside PSTN world: 1. with 1.4 it is fine. 2. with 1.6.2, I need to set prematuremedia=no is sip.conf. or sip phone can not hear the ring and the beginning of the PSTN voice. 3.

I'm trying to test IMAP in 1.4.17 and it appears to be not working. I've compiled imap-2007 with the following on a CentOS 5 box: make slx EXTRACFLAGS="-I/usr/include/openssl -fPIC" and I've configured and compiled asterisk with the following: ./configure --with-imap=/usr/local/src/imap-2007 The compile and install went just fine, no warnings and no errors that I saw.

Hey Guys! I am getting this wired error when i am calling IAX trunk. Everything works! but i want to get rid on these RED WARNING messages.. what is wrong here ? I have func_aes.so module loaded. also i remove and test but still same error. -Satish == Using SIP RTP CoS mark 5 -- Executing [7623 at from-sip:1] Macro("SIP/7527-0000000d", "orasebcamdial,7623") in

Hey Guys, I knew this is stupid question but i just want to know what is the difference between Queue member logged out vs Pause ? -Satish -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110321/7646a66b/attachment.htm>

Hey Guys! We had migrate asterisk 1.2 to 1.8 now big issue is queue system. Before we had 3 queues and we were using AgentCallbackLogin but now its quite difficult to use AddQueueMember. Is there any easy way to logged into multiple queue using AddQueueMember ? and restrict agent for specific queue ? -S -------------- next part -------------- An HTML attachment was scrubbed...

Hey Users, I am using record application to record MeetMe conf. but look like its creating individual files for every channel. What applucation is best to record MeetMe conf ? ~ # ls -l /var/spool/asterisk/monitor/ total 489220 -rw-r--r-- 1 asterisk asterisk 44 Feb 16 08:42 8881-conf-20110216-084224.wav -rw-r--r-- 1 asterisk asterisk 1858284 Feb 16 13:05 8881-conf-20110216-130321.wav

Hey Guys! I have two asterisk 1.8.3.2 same version on both machine but why one asterisk has "reload" command but other doesn't ? satish-desktop*CLI> core show version Asterisk 1.8.3.2 built by root @ satish-desktop on a x86_64 running Linux on 2011-03-25 16:10:39 UTC satish-desktop*CLI> re <tab><tab> realtime reload shirley*CLI> core show version Asterisk

Hi Guys! This is strange issue with 1.8 I have restarted my asterisk and it destroy all registered SIP peers now only solution is i manually reboot all phones to get them register back. I have never seen issue like this before. Any idea what would be the issue ? Thanks S -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I have just latest branch of asterisk 1.8 and i didn't found dahdi command in CLI everything seem fine. am i missing something ? campbx2*CLI> dahdi <tab tab> No such command 'dahdi' (type 'core show help dahdi' for other possible commands) campbx2*CLI> root at campbx1:/etc/wanpipe# wanrouter hwprobe ------------------------------- | Wanpipe Hardware

Hey Guys! We have two Asterisk with A102D Sangoma cards now i want to connect them back-to-back over PRI line via Cross-cable so what would be the configuration specially timing source and all? anybody did it before like this ? I want to make sure everything before putting in production.. (saving my downtime) -S -------------- next part -------------- An HTML attachment was

I've configured asterisk 1.4 to use imap storage for voice-mail and while I'm happy with it generally speaking it really seem to hammer the IMAP server. It appear, from the IMAP server logs that it's polling the imap server every *second* for mailbox updates for the users' voice-mail folders. Is it really necessary to do this once a second? Is this tunable anywhere? Thanx, b.

Hello all, I use asterisk 1.6.0.13 with realtime DB. when a phone (SIP) receive a new voicemail, asterisk update with a NOTIFY the number of waiting message to the phone, so all is ok . if I use the voicemail application to consult and to delete voicemail, asterisk again update correctly the number of message to the phone. now, if I use a web application or script on aastra phone to delete a

Hey Guys, Whenever i calling any extension i am getting following WARNING messages do you have any idea they coming from where? -Satish shirley*CLI> == Using SIP RTP CoS mark 5 -- Executing [7623 at from-sip:1] Macro("SIP/7527-00000008", "stdexten,7623,sip/7623&sip/7624") in new stack -- Executing [s at macro-stdexten:1] Dial("SIP/7527-00000008",

Bad day today. Why this new JIRA system not working. I have created issue and submit and i got blank page.. Please someone help me to create BUG!!!!!!!!!!! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110608/e99afa31/attachment.htm>

Hi All, Anyone out there successfully tested Asterisk 1.8 with Web-Meetme 4.0v in my case my asterisk got crashed when i dialing conf room number. Best, S -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20101215/52082964/attachment.htm>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have an Asterisk box sitting between the PSTN and a legacy PBX. I have successfully configured Asterisk to use IMAP for voicemail and have written the necessary script to turn the MWI indicator (via a .call file to the PBX) on and off. I have two issues still outstanding: 1) When the user listens to his voice mail via the phone, it will be

I have deployed several 1.8.3.2 systems as upgrades of customers systems and now I am seeing random crashes. For some reason the builds lock up and stop taking sip connections. Existing calls stay on but when the user hangs up no new calls or reg attempts work. In most cases a "core restart now" cleans things up. Some times I have to kill the asterisk process. The stability of 1.8.2

How to get rid on following.. why its Invalid ? holler*CLI> queue show queue1 queue1 has 0 calls (max unlimited) in 'rrmemory' strategy (0s holdtime, 0s talktime), W:0, C:0, A:0, SL:0.0% within 0s Members: Agent/7201 (Invalid) has taken no calls yet Agent/7202 (Invalid) has taken no calls yet No Callers -------------- next part -------------- An HTML