similar to: Sangoma A200 and battery removal detection ??!!!

Hi, Has anyone ever experienced crosstalk with sangoma analogue cards on 64bit? We have exhausted every test to try and replicate this and find a solution with Sangoma tech support, but we can not fix it. We are about to try the card and four *seperate* UK BT lines in a 32bit system. The current system is a 4gb, dual core cpu with pbx in a flash 1.4, Zaptel and Asterisk 1.4.21-2 Currently we

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

Hi Guys, Looking for a powerful box that is compact, can take two hard drives for Raid-1 (no SSD, too expensive), have at least two Gig ports or two 10/100mbps ports. Fit two PCIe or one PCIe card plus it's daughter card which needs as much room as a PCIe and doesn't need the actual slot. That is for Sangoma A200 + Daughter card. I would be really glad if I can get some sort of a KVM

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/fbeeb280/attachment.htm

I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone system kept ringing through when they

Hi, Does some one experience the Sangoma A20X-ec series card that cant detect the hangup tone? I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines and each time some one call in and my phone delay 1-2 sec (this is Asterisk delay nothing to do with Sangoma) and it rings on my phone, however, end on the day I got not less that 10 empty messages. I found out that Sangoma FXO

Hi I was wondering if any one has used these cards, I am looking at this as a replacement for the tdm410, I have some issues with installing the tdm410 in a small case because of the power plug being at the end of the board. I am in australia seems like we have a different setup for out fxs voltage, any one in oz using this card ? Thanks Alex -------------- next part -------------- A non-text

Hi. I have 3 lines connected to a SangomaA200. All was working normally, but 3 days ago we experiment this issue. The outside callers can call us normally; but when we try to do an external call, just receive the message "all circuits are busy". Only happen with outgoing call. Incomming calls work fine. if the conf was not modified, what can i check to search the reason of that

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are two users in Office 2 with the

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c:

Howdy, I've spent a couple of days writing a new feature for Asterisk that allows to record calls in T1 or E1 PRI lines using Asterisk connected to tapped lines. This means that you don't have to install anything in the PBX's/telco equipment that is going to be monitored, all you need is to install a device like the PN 633 Tap Connection Adapter that is available for example, from

Hi all, For a while now I've been using Asterisk together with HFC-PCI cards (Cologne chipset) for Euro-ISDN BRI support. However, I do not consider this to be the most reliable solution and believe that the most stubborn problems have always been software related. If my clients are willing to spend a bit more money on different hardware, what do you think the best solution would be?

Hi Does Sangoma 8-port card A108 support PCIe version 2.0 ? The card is here http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a108.html And we want to use 3 such cards in this motherboard because it has 3 PCIe slots of version 2.0 http://www.intel.com/products/desktop/motherboards/DX58SO/DX58SO-overview.htm Is this a good idea ? Do you have any experience

Hi all, I have an external application commanding asterisk by AMI and AsyncAGI. I also have a dialplan like this: ; AsyncAGI extensions exten => _8.,1,Noop(entering in AGI loop at 8 ${EXTEN}); exten => _8.,n,AGI(agi:async); exten => _8.,n,Hangup(); ; Meetme extensions exten => _1.,1,Noop(Conference ${EXTEN} ${CONTEXT}); exten =>

Dear Folks, Im looking for a way to detect if an analog line is connected to card or not (Im using Sangoma A200). Im using the dialtone detection when dialing but need a way to detect the disconnection of the line when it actually happens. Anyone have any hints or tricks for this? Regards. -- Mohammad Sh. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Everyone, We are using two Sangoma U100 (USB FXO) units connected to an Acer Aspire Revo (little PC running on Atom). The units work beautifully except for Monday :-) It maybe a conincedence or maybe the fact that Saturday/Sunday is off and something happens where one of these U100 modules goes into sleep and that's when all the 4 Dahdi channels are lost. So, I have been getting Monday

I have been trying out several stun servers with Asterisk 1.6.0.9 and 1.6.1.0 and I keep getting the following message: [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]:

Now that everything seems to rock I've hit the next hurdle. In my extensions.conf I have the extension: [agi-async] exten => _01XXXX,1,Agi(agi:async) and I can see that the context is "hit" when dialing into *. However my java app that's supposed to receive async agi events get no such events at all, but it does receive other manager API events. * version is 1.6.1.4