Josué Conti
2006-Jun-23 13:18 UTC
[Asterisk-Users] Asterisk-1.2.9.1 with Siemens HiPath 4000
Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060623/433cd0f4/attachment.htm
richard Coco
2006-Jun-26 07:08 UTC
[Asterisk-Users] Asterisk-1.2.9.1 with Siemens HiPath 4000
Hi Josu? if the Siemens phone calls Asterisk, it didn't get a dial tone from Asterisk? Is it correct? if yes, this is depending of Asterisk which didn't generates a ringback messages as it expexts dial ton generation localy. So try this workaround for HiPath local dial ton generation: -> Add option TR6Q(TRGT) to the class of trunk (COT) parameters hope it will help... rich --- Josu? Conti <josueconti@gmail.com> wrote:> Hello all. > I have installed and functioning asterisk-1.2.9.1 > where I effected one > upgrade in asterisk-1.0.9, is interconnected with a > PABX Siemens HiPath 4000 > in ISDN PRI with protocol QSIG, the one that is > happening he is that the > calls originated for PABX Siemens and destined to > SIP phones asterisk are > being without audio, nor Ring, is dumb. They could > help in this case me? > Best Regards > > Josu? > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users>__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
richard Coco
2006-Jun-27 15:20 UTC
[Asterisk-Users] Re: Asterisk-1.2.9.1 with Siemens HiPath 4000
Hi Josue... i have taken a short look at the configuration you sent to me off list. First of all, try to change the protocol from ECMAV2 to ETSI or EDSS1 (set the segmentation to 1) and like suggested by Silviu change the switchtype=EuroISDN too. EcmaV2 is normaly used to interconnect Siemens PBXs. Something strange is that in the HISTA you have severals "CIRCUIT EXT DIALTONE ERROR" from the TM2LP (analog trunk line). i will compare tomorrow the COT with the one we have configured at the office... rich --- Josue Conti <josueconti@gmail.com> wrote:> Hi Richard > Thank you very much for its attention > Below my configurations of HiPath the 4000 and > asterisk-1.2.9.1 Agrade???o its > attention, if to need something to communicate > itself__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Josué Conti
2006-Jun-27 19:00 UTC
[Asterisk-Users] Re: Asterisk-1.2.9.1 with Siemens HiPath 4000
Hi Richard, I have the interconnection in qsig, functioning but that problem of the calls is occurring to be dumb some times. Use qsig because of the easinesses as caller id and name of the origin in the destination telephone. You can help me? It knows if the easinesses to enter the equipment are compatible as callpickup, transfer? Regards Josu? 2006/6/27, richard Coco <coco_richard@yahoo.com>:> > > Hi Josue... > > i have taken a short look at the configuration you > sent to me off list. > > First of all, try to change the protocol from ECMAV2 > to ETSI or EDSS1 (set the segmentation to 1) and like > suggested by Silviu change the switchtype=EuroISDN > too. EcmaV2 is normaly used to interconnect Siemens > PBXs. > > Something strange is that in the HISTA you have > severals "CIRCUIT EXT DIALTONE ERROR" from the TM2LP > (analog trunk line). > > i will compare tomorrow the COT with the one we have > configured at the office... > > rich > > --- Josue Conti <josueconti@gmail.com> wrote: > > > Hi Richard > > Thank you very much for its attention > > Below my configurations of HiPath the 4000 and > > asterisk-1.2.9.1 Agrade?o its > > attention, if to need something to communicate > > itself > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060627/7203a1e6/attachment.htm