similar to: Replace full PRI with SIP/IAX trunks...YES/NO?

Hey Guys I have an indial range of 61211118[01234]X being trunked sip to xxx.yyy.189.65 Now I want to break this down into 612111180x going to xxx.yyy.188.145 and 612111184x going to xxx.yyy.189.199 reminder being used for fax->email etc etc etc I have created the outbound routes and sip trunks I can see that all the sip trunks are up I can see the outbound routes are there and

I have call center PCs that switch between an IBEAM SIP softphone and a NEBU IAX softphone (for reasons that aren't germane here). The SIP softphones work fine, but the IAX softphones get a fast busy unless I give them an IAX trunk to use, instead of the PRI trunks that all the other phones are using. I am using Asterisk 1.2.3. svn rev 47264. I've appended a sample call trace. The

I've a call center using IAX softphones provided by a third party. We've observed problems where the IAX phones seem unable to use our PRI trunks. A sample anonymized call is provided below with the PRI debug calls embedded. Any thoughts, comments or suggestions would be welcome. In anonymizing it, I preseved the format and number of digits sent. -- Accepting AUTHENTICATED

We are moving our office, but our PRI isn't moving for a while yet. I'd like to setup a box at the old office to receive -ALL-- PRI traffic and send it over an IAX trunk to another Trixbox install at the new office. Everything should go, period. Any ideas on a simple dialplan to make this happen? Thanks, -Darren -------------- next part -------------- An HTML

Hi, I'd like to terminate IAX call on PRI interface. What conditions should be met to be able to send arbitrary caller numbers to called party, so he can call back to supplied ISDN number (that is different for every IAX user) - not through PRI interface, but plain ISDN call !! Thanks in advance, regards, Rob.

How can you know beforehand, without running fsck, that all inodes are used of a particular ext3 filesystem? Default systemtools use output from df, which shows only a 50% usage of the filesystem, and pretend nothing is wrong, while you really cant't move or copy a file to it. So I only found out when running fsck. This is my output from fsck (RH7.2, stock kernel, stock? ext3): root# fsck

Greetings, I have a dialplan that calls the dictate application, but I want to do some post-processing on the RAW file created. The post processing is working fine as long as the dictation application exits gracefully, but fails when the user simply hangs up. How can I make sure the system() command is run regardless? Example: [test-dictation] exten => 123,1,Dictate(/tmp/dictate) exten

I'm ordering a PRI T1 for use with Asterisk and a Digium Wildcard TE405P. The provider is asking me a number of questions about how I want to configure the line. Here goes: 1. Dial Tone - No, Yes - Precise, Yes - SCC 2. Framing - SF, ESF 3. Line Coding - AMI, B8ZS 4. Signaling Type - Ground Start, E&M, Loop Start w/Ring, Loop Start w/o Ring 5. Pulse Mode - DTMF, MF 6. Outpulse Start -

Hi all, I'd like to setup a really lean Asterisk installation that essentially has a full ISDN PRI (AT&T, T1, 23 B-chans, 1 D-chan, BZ8S, 5ESS, National dialplan) on a Digium TE207P adapter that all it does is convert the ISDN channels to SIP/IAX channels. Then I would add this Asterisk 'gateway' as a provider on one (or many) Asterisk systems on the back. With such a config I

fixme:system:SetProcessDPIAware stub! fixme:advapi:CheckTokenMembership ((nil) 0x12a4a0 0x35fd0c) stub! fixme:advapi:CheckTokenMembership ((nil) 0x12a4a0 0x35fd0c) stub! ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory fixme:advapi:LookupAccountNameW (null) L"root" (nil) 0x33f864 (nil) 0x33f868 0x33f85c - stub fixme:advapi:LookupAccountNameW

Hello everyone, I'm fairly new to asterisk and this list. Currently I'm working on IAX trunks to send/receive calls between 2 asterisk boxes with asterisk 1.6.1.1+asterisk gui 2.0. After some work in the gui, two boxes can send/receive calls to/from the other just fine, the only problem I have is the caller id. Here is my setup: 1. on both boxes, I added an IAX user in the gui, say the

Did someone monitor the PRI's or trunks some way? I tried with MRTG and Andrea Fino module but it never worked for me. Any other experience? I want to track the use of my PRI's and trunks using graphical as MRTG does each 5 minute, day, week & Year. But the option of the 5 Minutes I don't think is usefull, We need something more realtime. Thanks, Carlos Alperin

Does anyone know of a way to simulate the signaling of a PRI trunk for testing/setup purposes? I realize this may be a rather naive question, but I was wondering if you could take a TE110, for example, and using a crossover cable (or not?) and some means of emulating the NI2 signaling protocol connect it to another TE110 on another machine to test and verify an installation before the telco

A while back there was a thread in which many people were discussing how to make Netscape work with roaming profiles. There was some talk about how this would require a script to modify the registry, etc. I just talked to one of the NS programmers who said that the problem would be fixed and even enhanced in a version 4.5. He didn't say whether the 4.5 code was going to be an internal or

I'm in the process of turning up a PRI in one of my markets and have run into a problem I have never seen before. I am unable to place a local outgoing call. Long Distance over the same PRI works fine. When I attempt to place a local call using the PRI I see Asterisk attempt to dial, and am greeted with a busy signal. This signal appears to originate on the telco's switch. I have had

Hi, I have asterisk installed on centos with phpagi. Also I have PRI card connect to it. it's possible to show the sip number when calling from sip number to external number thru the PRI, instead of showing the PRI number show the sip number ? Regards -Hadi.Salem

Hello! I need to send Faxes from an Asterisk box to an Asterisk + Iaxmodem + Hylafax installed on other box. I have setup IAX trunks between this boxes, all works fine but can?t send faxes from one to other, Im trying with or without NVFaxDetect application but does not work. Is there a way to get it working?. If I connect a fax machine directly to Asterisk with Iaxmodem and Hylafax, I have no

I have an Asterisk system running on T1 PRI trunks using a TE405P. It seems to be running ok, but one thing puzzles me. Every so often I get a raft of messages like this: -- B-channel 0/1 successfully restarted on span 1 -- B-channel 0/2 successfully restarted on span 1 ....... -- B-channel 0/22 successfully restarted on span 1 -- B-channel 0/23 successfully restarted on span 1 I could

I''ve just started a new rails project (3.0.1, ruby 1.9.2 on Mac OS X), and have a few parts of it built out. I''ve just created new controller/views using rails g scaffold_controller Lesson, and then added a route to routes.rb with "resources :lessons" Now, when i go to /lessons, Webrick fails with "Illegal instruction" The controller function getting hit is

Greetings, Last week I began researching Asterisk for the first time. I did what most noobs would do; downloaded an image that seemed simple and straightforward and had some credibility (*now). I also downloaded the TFOT version 1 as a guide. As questions arose, I tossed a few out in #asterisckNOW channel..and found it to be a ghost town. Only later did i start to ask a few