similar to: server recommentation (unique requirements)

Fellow Asterisk Users, I'm running Asterisk 1.2.5, and I've configured basic call queueing using agents. The problem I'm having is that agents who are on DND are still considered (by Asterisk) to be eligible to take calls. This means that calls will hit voicemail even when other agents who are not on DND are available. Any ideas how I can make agents ineligible to receive calls

Hello all, Has anyone use the Supermicro PDSME+ in combination with the TE110P successfully? My experience so far is not very good. I am running trixbox 2.0 but: 1) with zttool I am getting IRQ Misses. Don't seem to have IRQ conflict, but I am now running my SATA HD in DMA. And I am not able to set it in DMA(HIO... operation not permitted) 2) With zttool the Alarm is RED 3) When I do the

I posted a thread here... http://forums.opensolaris.com/thread.jspa?threadID=596 I am trying to finish building a system and I kind of need to pick working NIC and onboard SATA chipsets (video is not a big deal - I can get a silent PCIe card for that, I already know one which works great) I need 8 onboard SATA. I would prefer Intel CPU. At least one gigabit port. That''s about it. I

Hello. Has anyone been able to successfully make data (dialup modem) calls through a TDM2400E? We're able to make fax and credit card calls fine, but cannot successfully make modem calls using a 56K modem connected to a patch panel connected to an FXS port which then gets bridged to an FXO port connected directly to a phone line. We have 'echocancelwhenbridged=no' set in

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VGA adapter and the Ethernet port. I changed

Hello, Are there any KVM over IP switches that are not thousands of dollars? Ideally a 3-4 port switch for a few hundred seems reasonable to me. Mike -- Michael B Allen Java Active Directory Integration http://www.ioplex.com/

Hi, Thanks to some pointers from Christian Kratzer, I am now able to join the office VPN from a random WiFi hotspot. With the configuration files changes detailed below, from a public WiFi hotspot I can now use this 3 step procedure to login to the office VPN. 1) While at hotspot, boot up my -STABLE laptop. 2) Insert wireless card. 3) "rsh server" This procedure works for a DHCP

Morning Folks, As most of you know there were a few people who had the following three bugs: * CLOSE_WAIT: Lots of sockets in CLOSE_WAIT state. * 99% CPU: Mongrel''s getting "stuck" pegged at 99% CPU. * LEAK: Memory leak. I''ve successfully fixed these bugs or attributed them to one main cause: pstore. First, the memory leak was because of a bug in how the GC in Ruby

Hi Firstly apologies for the spam if you got this email via multiple aliases. I''m trying to document a number of common scenarios where ZFS is used as part of the solution such as email server, $homeserver, RDBMS and so forth but taken from real implementations where things worked and equally importantly threw up things that needed to be avoided (even if that was the whole of ZFS!).

---------- Forwarded message ---------- From: Celia Einhorn <celia.einhorn at gmail.com> Date: Wed, Feb 17, 2010 at 8:15 PM Subject: Fwd: Erika DeBenedictis-Recommendation To: drew einhorn <drew.einhorn at gmail.com> ---------- Forwarded message ---------- From: David H. Kratzer <dhk at lanl.gov> Date: Tue, Feb 16, 2010 at 9:24 AM Subject: Fwd: Erika

My manager reminds me that "in the old Sun days", the ssh server came up first, *before* the fsck on boot, so that if there was a problem, and fsck was waiting for an answer, you could remotely ssh in, kill it, restart it, and answer (or give it the right flags). Does anyone know if it's possible to have that happen with CentOS? It would be nice to have it boot that way, so that if

I rewrote much of the kqueue code since the old code didn't handle properly the case when both input and output I/O handlers were added to the same file descriptor with different callbacks. This is done commonly in Dovecot, so I'm wondering why more people didn't complain about problems with it.. :) I don't anyway have access to any BSDs so the code is completely untested. Please

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

I didn't see this answered in the FAQ, and it's important to one of my application owners. How does RSYNC handle open or write in process files? Thank you! J jadams@molex.com john.adams@molex.com CONFIDENTIALITY NOTICE: This message (including any attachments) may contain Molex confidential information, protected by law. If this message is confidential, forwarding it to

Hello! In the near future, I'll be deploying an asterisk system that will have (in addition to many SIP handsets) four FXS handsets. Is there a known limitation to the length of cabling that can be used between a Digium/Openvox/Sangoma FXS card and the end station? I understand the card will need a molex power connector plugged in to provide extra voltage. With traditional phone systems, I

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Has anyone come up with a way to get power to a TDM400P card installed in a Dell PowerEdge 1750? Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came