similar to: Polycom IP 4000 Soundstation SIP Conference Phone Question

I am getting this error [Aug 6 15:28:26] WARNING[24452]: chan_sip.c:1920 retrans_pkt: Maximum retries exceeded on transmission 8f68421-22821e1e at localhost for seqno 102 (Critical Response) [Aug 6 15:28:26] WARNING[24452]: chan_sip.c:1944 retrans_pkt: Hanging up call 8f68421-22821e1e at localhost - no reply to our critical packet. any Ideas? Jason

All, Since I have now (at least partially) got my 7961G phones working with Asterisk, I have temporarily moved on to try to get the expansion modules working. There doesn't seem to be much in the way of documentation here either. Does anyone have this combination working (or any 79X1) here? My goal is ultimately to do the monitoring approach. I have Google'd around, but come up

All, I have run into some CallerID issues. It seems to have happened as a result of just moving my config from 1.2.12 to 1.4.4 (although I am not sure of this). Therefore I am sure its just a misconfiguration somewhere, I just don't know where. I have throughout the office either Cisco 7961G or Polycomm Soundpoint SIP 430 IP phones. The problem is with CallerID showing up in some

hi, I am facing some issues while using MixMonitor. My extensions logic is attached below: exten => s,1,MixMonitor(${CALLERID(number)}-${TIMESTAMP}-${UNIQUEID}.gsm,b) in this extensions TIMESTAMP is not working in Asterisk 1.4. can any help me why TIMESTAMP is not working in Asterisk 1.4. regards, Asif

I'm setting up a new Asterisk system on a Dell server and I'm getting "fuzzy" voice between the Polycom IP SoundStation 550 and the Asterisk server. I've checked all of my codec settings and both the Asterisk and the Polycom agree on u-Law encoding. I'm using the latest release of the Asterisk code (1.4.17) and other software. If I call between phones (i.e. two

Hello, I'm having a problem with a few Polycom SoundStation 6000s. Everything works fine, but they drop registration to asterisk after about maybe 30 minutes - the phone does not re-try to register and if you try to dial out on the phone it says "URI Dialing is Disabled" Has anyone else had this issue? I'm running asterisk 11.7.0. This message may be private and confidential.

All, I've a question on A*k hardware. I'm running 1.2.18 on a Dell DC051 (Intel(R) Celeron(R) CPU 2.80GHz) with 512mb RAM. I'm supporting 60 users (Cisco 7940s each + Xlite PCs). Call loads are low, max of about 10 simultaneous SIP/IAX calls. CPU for A*k rarely goes above 2% as I can tell. Its IP only, no E1/T1 cards present. However, I get complaints of bad voice quality,

I am running Asterisk 1.4.5 and addons 1.4.1 in a CentOS 5 Server. My PBX has experienced several core dumps the last couple of days and I am not sure if this is what's causing it, but it always seems to happen when a particular extension on a grandstream phone uses ChanSpy SIP group. I have not been able to locate where the core dump file is being saved. I can't find it in my

sorry... typo.... the problematic phone has the 192.168.0.13 the asterisk has 192.168.1.211 when i connect a snom phone on the cable that was in the soundstation 6000 before and configure the phone to use 192.168.0.13 it does register on the asterisk via 5060/UDP... it would be helpful if someone, that has a running soundstation ip 6000 could send the configuration... :-/ regards, yves Am

Hi Mark, yes, you are right... these are different VLANs I configured the other phone to use the same IP (192.168.1.13)... and it worked flawlessly... on the SAME Networkcable in the same plug... so it must have something to do with the polycom phone config... remember... when I use tcp the phone tries to register, but does not even try with udp... thank you, yves Am 21.12.2016 um 13:34

Anyone successfully using the Polycom SoundStation VTX 1000 with Asterisk? I can't see any mention of it on the wiki page: http://www.voip-info.org/wiki-Polycom+Phones Thanks, Alvin

Hi, we've had a couple of Sounstation 4000's around for a couple of months working fine with our * box. Today, I tried for the first time to do a local 3-way conference with one of them, and could not find the "confrnc" soft key for doing that (as stated in the user manual). Spent 20 minutes without success, and ended up transferring the other parties to a meetme conference.

I would like to know if any body is using the Polycom Soundstation IP 4000 SIP conference phone with Asterisk. I am thinking of purchasing one. Kurt

I have a polycom 501 phone that is 1 hour off now. Before last sunday (time change) the time was fine. <?xml version="1.0" standalone="yes"?> <PHONE_CONFIG> <OVERRIDES _.0x20._log.level.change.sip="0" tcpIpApp.sntp.daylightSavings.stop.date="4" tcpIpApp.sntp.daylightSavings.stop.month="11"

Hi , I know it's might not the right way to asking such stupid question. But I want to take help from experts into VoIP fields so I have to decided to post here. Please help me which will be the best VoIP conferencing phone which will cover 10 Persians into conferencing with best audio support ? -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer -------------- next

asterisk-users-bounces at lists.digium.com wrote on 01/23/2015 10:24:24 AM: > Hello, > > I'm having a problem with a few Polycom SoundStation 6000s. > Everything works fine, but they drop registration to asterisk after > about maybe 30 minutes ? the phone does not re-try to register and > if you try to dial out on the phone it says ?URI Dialing is Disabled? > > Has

Does anyone know if you can use the Polycom "Norstar Clarity" speakerphones with Asterisk? Model number is 2501-03308-001 'C' Is it a SIP handset or analog style unit (or worse proprietary). Cheers, Dean -------------- next part -------------- An HTML attachment was scrubbed... URL:

> We run a variety of 5000, 6000, and 7000 series Soundstations running > Asterisk 11.6.0 and the phones are at 4.0.3.7562. We do not see these > registration issues. Would you be willing to send the configuration from asterisk for this? This message may be private and confidential. If you have received this message in error, please notify us and remove it from your system. Gyron may

Hi All, Does anyone have any experience getting a 7936 to work with Asterisk? Do you need to use SCCP or is there a SIP image for the phone? I have a few 7960G's and they are working with SIP, just curious if the config of the conference phone is the same and if anybody has any good setup links. Thanks! NB -------------- next part -------------- An HTML attachment was scrubbed... URL:

Just released by the CPSC on their recalls mailing list; please forward to any venues where you feel operators or resellers of the SoundStation might be, with this preface included. My 2W had a battery with the part code 1520-07804-002; its date code was GP0806, and therefore predates the recall period. Cheers, -- jra ----- Begin forwarded message ----- This message consists of the following: