similar to: Loudspeaker

Im looking for an Intercom solution thats interoperable wit Asterisk. Ive read several posts about people using the 2nd lines on some SIP phones w/speaker phone. Unfortunatley I dont that is going to cut it in a large warehouse enviroment. Does anyone have a solution that uses a "loudspeaker" ? Thank you, Steve Maroney

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Hi All, I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show and ztcfg -vv looks ok and the zttool show

Hi All, I have installed Asterisk 1.4.2 and have loaded ztdummy as I have no Digium cards. The problem I have is that MOH will not play. It starts and then stops. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 ZTDUMMY/1 1 UNCONFIGUR 0 0 0 I'm not sure if the above is correct.

All, I'm hoping someone can direct me as to why when someone calls my DID Asterisk tries to authenticate the incoming call on my outbound context. If I remove the GoTalk context I can receive incoming calls. Outbound calls work fine while I have the GoTalk context in place. The error I am getting when someone calls the DID is WARNING[16072]: chan_sip.c:8272 check_auth: username mismatch,

>> Actually, computing the "power spectrum" for each frame of W shows >> how large an ammount of the original signal at time offset j the >> echo canceller thinks should be removed from the current input frame. > > Careful when looking at W because of how the real and imaginary parts > are packed in the array. Err. Ok, as I got it, 'bin 0' has it's

Anyone have some recommended equipment for alerting people to calls in a noisy environment? I have Polycom IP550 phones set up in some really noisy environments - our mine hoists - and they tend to drown out the ringers. I'm using Clarity WR100s now. They're analog devices, attached to Linksys PAP2T ATAs as part of a call group to get a loud (advertised as 95dB) ring out there, but it

Is it possible to display the incoming calling number on a handset when trying to pick up a call from another handset? I currently have Call Pickup working using *8, I have also used the PickUp application successfully but I'm not sure how to use these features so the handsets show the incoming calling number and not the number that you have dialled to pick up the call. Regards David

I hope this doesn't already exist, but I couldn't find anything to help. I am installing a brand new Asterisk server, and want to use the Polycom IP331 phones. Does anyone have any steps on how to configure these? I have softphones working just fine, but for some reason I can't find a clear step by step on provisioning the Polycoms. Any help is greatly appreciated! Mark J.

All, I have a Polycom 650 phone, when turned on displays "Checking application". Can any give me some information as to what is wrong? I have copied the CFG files from a 601 phone to work with this 650. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070429/daadda2a/attachment.htm

Hi All, I have a Polycom Handset on a front door and I'd like the phone to dial a number as soon as the handset is lifted without having to press and buttons or enter any numbers. I know how to do this on a Linksys but I can't find out how to do it on a Polycom. I would be greatly appreciate is some is able to tell me how this is accomplished. Regards David. -------------- next part

Hi All, I can not install the asterisk-addons as it thinks there is no mysqlclient installed. I have installed mysql, mysql-server and mysql-devel and I am still unable to install the addons. I am running CentOS 5.2 i386. Please somebody help. -------------- next part -------------- An HTML attachment was scrubbed... URL:

The Telco in Canada is been real painful. I was wondering if anyone has installed a Digium TE1X0P card in Canada and if their Telco was so difficult. The Telco will not provide us a service until they see a FCC or DOC number for the equipment ware are connecting to their service. If have found "FCC Part 68, ANSI/ITA-968-A, Including Amendment A1 and A2 Industry Canada CS-03"

I'm not sure if I have a configuration problem or not. I am unable to dial out. When I try to dial in I can hear the phone ring on the dialling phone but Asterisk does not register anything. In zaptel.conf I have loadzone = au defaultzone=au fxsks=1 In zapata.conf language=au context=from-pstn When I do: zap show channels I get: Chan Extension Context Language

>> Generate a test signal (10+x sine waves per frame), where x increases by >> one for each iteration, and wraps around at 100. > > Testing with sine waves is usually not a good idea. If you intend on > cancelling speech, then test with speech. Ok, I tested more extensively with both music and two-way speech. More on this below. >> However, when peeking at the

I have a brand new TE120P card that I have installed and asterisk is not starting as I am getting the error: ERROR[5054] chan_zap.c: Unknown signalling method 'pri_cpe' It seems it does not matter what I change the vaule for signalling= to, it always returns it as invalid. I have tried the config from my other 2 servers running TE110P cards and the config from AusTechPartniships

Hi guys, I currently have about 10 Asterisk servers scattered around the place each hosting their own dynamic conference centre. Is there any way that when people join these conference centres on each server that somehow Asterisk bridges the conference centres on each server to form one large conference? Many Thanks David. -------------- next part -------------- An HTML attachment was

Hi All, I'm stuck and need some help. I have installed the Asterisk CDR Analyser Version 2.0.1. It mostly works except for the CDR Report. I get the following error even though it lists the CDR details. Database error: Invalid SQL: SELECT substring(calldate,1,10) AS day, sum(duration) AS calltime, count(*) as nbcall FROM cdr WHERE UNIX_TIMESTAMP(calldate) >=

Good morning, Pardon for this intrusion I just wanted to let everyone know about some of the specials that I have going on at HYPERLINK "http://www.astawerks.com"www.astawerks.com . From now until the end of June I will have a huge unpublished sale on all Digium products. Prices are way to low to list so I will have to be personally contacted. I also have a permanent sale on all

Hi Guys, I am a novice of Asterisk and I need some experts help to understand what I can get out of it. I need to make multiple calls (let say 50) at once to autoanswering softphones on a LAN and send all of them the same message that they will repeat with loudspeakers in the same environment. I am a little concerned about synchronization of the phones and moreover it is not much clear to me if I