thr3ads.net - asterisk users - [asterisk-users] X100P clone dial problems. [Dec 2006]

If this information is useful, please help other people find it:
Share via:

Klaverstyn, David C

2006-Dec-10 22:17 UTC

[asterisk-users] X100P clone dial problems.

I'm not sure if I have a configuration problem or not. I am unable to
dial out. When I try to dial in I can hear the phone ring on the
dialling phone but Asterisk does not register anything. 

 

 

In zaptel.conf I have

 

loadzone = au

defaultzone=au

fxsks=1

 

In zapata.conf

 

language=au

context=from-pstn

 

When I do: zap show channels I get:

 

Chan Extension Context Language MusicOnHold

pseudo from-pstn au

 

running ztcfg -vv shows

 

Zaptel Configuration

=====================
 

Channel map:

 

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

 

1 channels configured.

 

when I try to make a call I get:

 

-- Executing Dial("SIP/201-08c237c0", "Zap/1/1800456456|70")
in new
stack

Dec 9 13:52:54 NOTICE[4697]: app_dial.c:1056 dial_exec_full: Unable to
create channel of type 'Zap' (cause 0 - Unknown)

== Everyone is busy/congested at this time (1:0/0/1)

 

Please help.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061210/3e6ac845/attachment.htm

Tzafrir Cohen

2006-Dec-10 23:47 UTC

head link

[asterisk-users] X100P clone dial problems.

On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C
wrote:> I'm not sure if I have a configuration problem or not. I am unable to
> dial out. When I try to dial in I can hear the phone ring on the
> dialling phone but Asterisk does not register anything. 
> 
>  
> 
>  
> 
> In zaptel.conf I have
> 
>  
> 
> loadzone = au
> 
> defaultzone=au
> 
> fxsks=1
> 
>  
> 
> In zapata.conf
> 
>  
> 
> language=au
> 
> context=from-pstn
> 
Those need to be in the section [channels] and be followed by a

  channel => 1

to actually have any effect. You also must set signaling (signalling fxs_ks; in
your case).

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir

Klaverstyn, David C

2006-Dec-11 02:05 UTC

head link

[asterisk-users] X100P clone dial problems.

Thanks for your help.

 

This is my file.

 

 

 

[channels]

 

language=au

context=from-pstn

signalling=fxo_ks

 

;rxwink=300

 

usecallerid=yes

hidecallerid=no

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=yes

echocancelwhenbridged=yes

rxgain=0.0

txgain=0.0

callgroup=1

pickupgroup=1

immediate=no

 

channel => 1 

 

 

 

 

 

 

Upon reloading asterisk I get the following errors.

 

 

Dec 11 19:03:45 WARNING[5265]: chan_zap.c:10874 setup_zap: Ignoring
signalling

Dec 11 19:03:45 ERROR[5265]: chan_zap.c:10305 setup_zap: Unable to
reconfigure channel '1'

 

 

 

 

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Howard
Lowndes
Sent: Monday, 11 December 2006 6:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] X100P clone dial problems.

 

 

 

Klaverstyn, David C wrote:
> I have since added fxs_ks=1
 

 

This is meaningless.  Follow the example that I posted.

 

 

 

  and channel => 1
> 
> This has not fixed the problem.  I do notice a warning on the reloadof
> asterisk.
> 
> WARNING[4296]: chan_zap.c:10874 setup_zap: Ignoring signalling
> 
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir
> Cohen
> Sent: Monday, 11 December 2006 4:47 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] X100P clone dial problems.
> 
> On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C wrote:
>> I'm not sure if I have a configuration problem or not. I am unable
to
>> dial out. When I try to dial in I can hear the phone ring on the
>> dialling phone but Asterisk does not register anything. 
>> 
>>  
>> 
>>  
>> 
>> In zaptel.conf I have
>> 
>>  
>> 
>> loadzone = au
>> 
>> defaultzone=au
>> 
>> fxsks=1
>> 
>>  
>> 
>> In zapata.conf
>> 
>>  
>> 
>> language=au
>> 
>> context=from-pstn
>> 
> 
> Those need to be in the section [channels] and be followed by a
> 
>   channel => 1
> 
> to actually have any effect. You also must set signaling (signalling 
> fxs_ks; in your case).
> 
 

-- 

Howard.

LANNet Computing Associates - Your Linux people <http://lannetlinux.com>

When you want a computer system that works, just choose Linux;

When you want a computer system that works, just, choose Microsoft.

--

Flatter government, not fatter government; abolish the Australian
states.

 

_______________________________________________

--Bandwidth and Colocation provided by Easynews.com --

 

asterisk-users mailing list

To UNSUBSCRIBE or update options visit:

   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061211/6dfa3da6/attachment-0001.htm

Tony Mountifield

2006-Dec-11 03:13 UTC

head link

[asterisk-users] Re: X100P clone dial problems.

In article <ED01933C8C6A2949A37045F012ACF7BA684521@ap-mail1.ingrnet.com>,
Klaverstyn, David C <David.Klaverstyn@intergraph.com>
wrote:> 
> Thanks for your help.
> 
> This is my file.
>  
> 
> [channels]
> 
> language=au
> 
> context=from-pstn
> 
> signalling=fxo_ks
This should be: signalling=fxs_ks

Cheers
Tony
-- 
Tony Mountifield
Work: tony@softins.co.uk - http://www.softins.co.uk
Play: tony@mountifield.org - http://tony.mountifield.org

Klaverstyn, David C

2006-Dec-12 15:24 UTC

head link

[asterisk-users] X100P clone dial problems.

Well I finally got it to work.  I changed the DSL filter and it started
to work.  Very strange.

Thanks for everyone's suggestions.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Howard
Lowndes
Sent: Tuesday, 12 December 2006 5:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] X100P clone dial problems.

Well, my PSTN card has:

signalling-fxs_ks

and that works for me.

Klaverstyn, David C wrote:> Thanks for your help.
> 
>  
> 
> This is my file.
> 
>  
> 
>  
> 
>  
> 
> [channels]
> 
>  
> 
> language=au
> 
> context=from-pstn
> 
> signalling=fxo_ks
> 
>  
> 
> ;rxwink=300
> 
>  
> 
> usecallerid=yes
> 
> hidecallerid=no
> 
> callwaiting=yes
> 
> usecallingpres=yes
> 
> callwaitingcallerid=yes
> 
> threewaycalling=yes
> 
> transfer=yes
> 
> canpark=yes
> 
> cancallforward=yes
> 
> callreturn=yes
> 
> echocancel=yes
> 
> echocancelwhenbridged=yes
> 
> rxgain=0.0
> 
> txgain=0.0
> 
> callgroup=1
> 
> pickupgroup=1
> 
> immediate=no
> 
>  
> 
> channel => 1
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
> Upon reloading asterisk I get the following errors.
> 
>  
> 
>  
> 
> Dec 11 19:03:45 WARNING[5265]: chan_zap.c:10874 setup_zap: Ignoring 
> signalling
> 
> Dec 11 19:03:45 ERROR[5265]: chan_zap.c:10305 setup_zap: Unable to 
> reconfigure channel '1'
> 
>  
> 
>  
> 
>  
> 
>  
> 
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Howard
Lowndes> Sent: Monday, 11 December 2006 6:00 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] X100P clone dial problems.
> 
>  
> 
>  
> 
>  
> 
> Klaverstyn, David C wrote:
> 
>>  I have since added fxs_ks=1
> 
>  
> 
>  
> 
> This is meaningless.  Follow the example that I posted.
> 
>  
> 
>  
> 
>  
> 
>   and channel => 1
> 
>>
> 
>>  This has not fixed the problem.  I do notice a warning on the reload
of> 
>>  asterisk.
> 
>>
> 
>>  WARNING[4296]: chan_zap.c:10874 setup_zap: Ignoring signalling
> 
>>
> 
>>  -----Original Message-----
> 
>>  From: asterisk-users-bounces@lists.digium.com
> 
>>  [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
Tzafrir> 
>>  Cohen
> 
>>  Sent: Monday, 11 December 2006 4:47 PM
> 
>>  To: asterisk-users@lists.digium.com
> 
>>  Subject: Re: [asterisk-users] X100P clone dial problems.
> 
>>
> 
>>  On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C wrote:
> 
>> > I'm not sure if I have a configuration problem or not. I am
unable
to> 
>> > dial out. When I try to dial in I can hear the phone ring on the
> 
>> > dialling phone but Asterisk does not register anything.
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > In zaptel.conf I have
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > loadzone = au
> 
>> > 
> 
>> > defaultzone=au
> 
>> > 
> 
>> > fxsks=1
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > In zapata.conf
> 
>> > 
> 
>> > 
> 
>> > 
> 
>> > language=au
> 
>> > 
> 
>> > context=from-pstn
> 
>> > 
> 
>>
> 
>>  Those need to be in the section [channels] and be followed by a
> 
>>
> 
>>   channel => 1
> 
>>
> 
>>  to actually have any effect. You also must set signaling (signalling
> 
>>  fxs_ks; in your case).
> 
>>
> 
>  
> 
> -- 
> 
> Howard.
> 
> LANNet Computing Associates - Your Linux people
<http://lannetlinux.com>> 
> When you want a computer system that works, just choose Linux;
> 
> When you want a computer system that works, just, choose Microsoft.
> 
> --
> 
> Flatter government, not fatter government; abolish the Australian
states.> 
>  
> 
> _______________________________________________
> 
> --Bandwidth and Colocation provided by Easynews.com --
> 
>  
> 
> asterisk-users mailing list
> 
> To UNSUBSCRIBE or update options visit:
> 
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>
------------------------------------------------------------------------> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Howard.
LANNet Computing Associates - Your Linux people <http://lannetlinux.com>
When you want a computer system that works, just choose Linux;
When you want a computer system that works, just, choose Microsoft.
--
Flatter government, not fatter government; abolish the Australian
states.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Apparently Analagous Threads

Search for more apparently analagous threads

asterisk users - Dec 2006 - X100P clone dial problems.

[asterisk-users] X100P clone dial problems.

[asterisk-users] X100P clone dial problems.

[asterisk-users] X100P clone dial problems.

[asterisk-users] Re: X100P clone dial problems.

[asterisk-users] X100P clone dial problems.

Apparently Analagous Threads