Klaverstyn, David C
2013-Feb-19 02:05 UTC
[asterisk-users] Call Pickup how to display CND of incoming number
Is it possible to display the incoming calling number on a handset when trying to pick up a call from another handset? I currently have Call Pickup working using *8, I have also used the PickUp application successfully but I'm not sure how to use these features so the handsets show the incoming calling number and not the number that you have dialled to pick up the call. Regards David Klaverstyn -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130219/7c9d1d62/attachment.htm>
Rusty Newton
2013-Feb-19 15:58 UTC
[asterisk-users] Call Pickup how to display CND of incoming number
----- Original Message -----> From: "David C Klaverstyn" <David.Klaverstyn at intergraph.com>> Is it possible to display the incoming calling number on a handset > when trying to pick up a call from another handset? > > > > I currently have Call Pickup working using *8, I have also used the > PickUp application successfully but I?m not sure how to use these > features so the handsets show the incoming calling number and not > the number that you have dialled to pick up the call.You are placing a call *to* Asterisk, therefore the handset, like most will show the number you dialed. I don't know how you would get the CallerID to update during a connected SIP session. I'm no SIP expert, but Googling around - I don't think it's possible, at least easily... http://forums.asterisk.org/viewtopic.php?f=1&t=71351&p=136777 http://forums.digium.com/viewtopic.php?p=152753 -- Rusty Newton OS Community Support Manager | Digium, Inc. | www.digium.com Office/Cell/Fax: 256-428-6200
Ishfaq Malik
2013-Mar-14 14:47 UTC
[asterisk-users] Call Pickup how to display CND of incoming number
On Tue, 2013-02-19 at 02:05 +0000, Klaverstyn, David C wrote:> Is it possible to display the incoming calling number on a handset > when trying to pick up a call from another handset? > > > > I currently have Call Pickup working using *8, I have also used the > PickUp application successfully but I?m not sure how to use these > features so the handsets show the incoming calling number and not the > number that you have dialled to pick up the call. > > Regards > David KlaverstynTry setting sendrpid to pai in sip.conf -- Ishfaq Malik <ish at pack-net.co.uk> Department: VOIP Support Company: Packnet Limited t: +44 (0)845 004 4994 f: +44 (0)161 660 9825 e: ish at pack-net.co.uk w: http://www.pack-net.co.uk Registered Address: PACKNET LIMITED, 2A ENTERPRISE HOUSE, LLOYD STREET NORTH, MANCHESTER SCIENCE PARK, MANCHESTER, M156SE COMPANY REG NO. 04920552