similar to: Ssh access over a zap channel...

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

I have had a lot of complaints about the time it takes to setup a call. I have timed it and it is almost five seconds before it even starts ringing. The SIP device sends the request almost instantly but the channel is taking a long time to pickup and dial. It wouldn't be so bad but they hear nothing. I would like to provide ringback before the zaptel actually starts ringing the channel. Has

I have compiled zaptel on Mandrake following everything I have always done on Fedora. It is 2.6 udev so... I had to modify the 01-devfs.rules Make linux26 Make Make install... Everything appears to compile correctly but it says module not found when doing "modprobe zaptel" Is this a rights issue? Jordan Novak -------------- next part -------------- An HTML attachment was

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

We are using an Asterisk box to do conferencing right now. I have had about sixteen active lines in conference and the quality was acceptable. We now have a need for 50 people to conference at one time. Does anyone have enough experience doing this to give me some pointers. Will it even be reasonable to try this? Is the mixing done on the the hardware, I plan on using a quad span t-1 card from

On 6/4/07, Jordan Novak <jnovak@logisticshealth.com> wrote: > I am having a difficult time with the transition from agentcallback login... > Here are a few of the isssues, I am logging in using chan_ local > ie:local/8000 as the extension I'm not sure if this will solve any of your problems or not, but I've found it's often necessary to use the "/n" on the

I am looking at some directions on how to install and it is asking me to edit defines.php, it states that the file should be located in the source directory, but I can't seem to find it anywhere on my machine. Anyone been thru this? Jordan Novak Communications Technician -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to get ZapRAS working but not getting very far.. Asterisk CLI shows: WARNING[3355]: app_zapras.c:173 run_ras: wait4 returned -1: No child processes and /var/log/messages shows: using the plugin option requires root privilege Can anyone shed any light on this and any fix? Googling the error doesn't find much.. I'm not sure what 'plugin' it is talking about,

I have installed asterisk on numerous servers. Every install was done on Fedora and (White box Linux). I now have zap channels in one of the boxes (T-1). No matter what type of channel I call on (sip or zap) I get some really strange artifacts in the sound, almost like a skip in the playback. It seems to always be in about the same place in the recording. Usually in the beginning of playback. For

I am using Asterisk to send Voicemail out as Email. I am running into a problem I believe to be caused by the exchange server requiring SMTP authentication. I cannot get the sys admin's to turn it off. Does anyone know enough about sendmail to help me. I am assuming that the default mail client is sendmail. It will also send to other non-SMTP authenticated servers. Your help is much

Is there an app or softphone for meetings that displays the hosts screen like webex or intercall. Jordan Novak -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060321/df90d527/attachment.htm

I agree with these fella's, this is a piss poor way of fixing it. I only know of one call center that used static agents, mostly because they were sold a peice of crap and they had no idea how to use it the other way. I think you will find the majority of call centers are callback centers. This decision has taken Asterisk out of the realm of providing reasonable call center solutions. VIVA

Hello my name is Ilija Poznic and I have a problem. My configuration is 1. Digium TDM4000P with one FXS. 2. AVM Fritz ISDN adapter (configured with capi). When I connect to my ISP and then start *. Asterisks is registering me to SIP provider iconnect. After that I can call international call trough VoIP. My problem is that I want to dialout to ISP only when I have a international call.

I have three polycom 501 that are all hearing echo. The other party sounds fine but you can hear yourself rather well. The volume does help if lowered but that also makes the other party extremely quiet. Is there any way to control the gain of the mic or stop the microphone from picking up so much from the handset. It only happens while you are on the handset. -------------- next part

I am looking for completly wireless desktop phones. Until I realized we needed wireless i was going to use polycom soundpoint 501's. Any suggestions on a comparable wireless phone? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070328/88e22671/attachment.htm

Skipped content of type multipart/alternative-------------- next part -------------- _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev

I have two IAX trunked *, there are loud crackles and pops, they are dialing out a T-1 and are sip devices, it also drops words, any help or Ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060516/dc68274f/attachment.htm

I am using rrmemory for my queues. I have noticed that the application will only distribute or dial one number at a time. Is there a different strategy that will allow the queue to distribute more than one call at a time? I don't want to use ringall because that would tie up thirteen of my trunks every time it tried to distribute a call. Any thoughts? -------------- next part -------------- An

I am having a difficult time with the transition from agentcallback login... Here are a few of the isssues, I am logging in using chan_ local ie:local/8000 as the extension Call Detail records no longer show agent/xxxx as the dstchannel show agents no longer shows the channels state show queues does not show the member Can anybody help? I have a ton of time invested in applications I developed