I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work very well, but should that really be the problem with ZapRAS?! -- Daniel
Daniel, we have the same problem when our PRI line drops and Zapras has to reconnect. You will also notice that the pppd process does not die when Zapras does and the ppp connection cannot re-establish itself. What we normally do is restart asterisk and then kill the pppd process with the command: killall -9 pppd. How much of your resources does the pppd process take up when Zapras executes? Maybe try making pppd a lower priority than asterisk. Double check your configuration and make sure that you've done all that you needed to in order to properly setup zapras. go to digiums website and look at documentation. On 6/22/05, Daniel Nystr?m <daniel.nystrom@westel.se> wrote:> I'm trying to use ZapRAS to enable ppp connection through my E1. > After the ZapRAS command is executed, all sound is crappy on all lines! > The only solution is to reboot the machine (or halt it, and then power > it on since Digium's hardware doesn't like reboots). > Anyone know how this can happen?! > I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late > though) not to work very well, but should that really be the problem > with ZapRAS?! > -- > Daniel > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
>Daniel,> we have the same problem when our PRI line drops and Zapras has to >reconnect. You will also notice that the pppd process does not die >when Zapras does and the ppp connection cannot re-establish itself. >What we normally do is restart asterisk and then kill the pppd process >with the command: killall -9 pppd. >How much of your resources does the pppd process take up when Zapras >executes? >Maybe try making pppd a lower priority than asterisk. >Double check your configuration and make sure that you've done all >that you needed to in order to properly setup zapras. go to digiums >website and look at documentation. Thanks for your reply. Now I retried ZapRAS and, when not in panic, it only required an restart of Asterisk to recover the sound. But the pppd process was gone and nothing was taking more than 0.2% CPU. Seems like ZapRAS destroy something within Asterisk then? Regarding ZapRAS, I don't even get it to work at all. More on that later. How are your ZapRAS configured? Do you connect to an ISP through it? I've tried the new app_pppd as well, and that one connects. But the connetion dies within a few second (just stop responding/working). See my other earlier posts about that. I've gone through Digiums website more than once to get this to work, but there seems to be only a README-file in the ftp area for information. Which page did you mean? I've been trying for month to get this working. And alot of questions have been posted to the mailing list from me. Even the IRC channels has been visited. But no one seems to have this problem, or are even using the ZapRAS/app_pppd. I request any tips regarding ISDN dialup Internet access. Thanks! -- Daniel
Hi all, could ZapRas work on system with a HFC isdn card? Tnaks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060210/4905637f/attachment.htm
Hi people! Anyone have used zapRAS? It's possible to mount an asterisk with zapRAS and give internet service to some customers? Best Regards Ever -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060712/d69b92cb/attachment.htm
Hi all,
I'm trying the ZapRAS application and I followed this giude. Could it
work with an HFC pci isdn card? I tryied and i get this error:
*CLI> -- Executing Answer("Zap/1-1", "") in new stack
-- Accepting data call from '123456789' to '987654321' on
channel
0/1, span 1
-- Executing ZapRAS("Zap/1-1",
"debug|64000|noauth|netmask|255.255.255.0|192.168.0.2:192.168.0.1") in
new stack
-- Starting RAS on Zap/1-1
Plugin zaptel.so loaded.
Zaptel Plugin Initialized
Using zaptel device 'stdin'
Zaptel device is 'stdin'
Unable to put device 'stdin' into HDLC mode
Jul 24 16:27:59 WARNING[1441]: app_zapras.c:149 run_ras: wait4 returned
-1: No child processes
-- RAS on Zap/1-1 terminated with signal 116
== Spawn extension (incoming,123456789, 2) exited non-zero on
'Zap/1-1'
-- Hungup 'Zap/1-1'
Anyone can help me ?
Thanks in advance
Giordano
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060724/f6855c5f/attachment.htm