similar to: ISDN BRI lines engaged when dialing out

Hi, I'm looking for an interface card for termination of Euro-ISDN2 (BRI) lines. That is ISDN lines from the telco into my Asterisk box. Any recommendations, good/bad expiriences ? At present I'm looking at cards from BeroNet and Junghanns. Cheers, John Faroese Telecom

Hi list! I am installing an * box that will be installed on a site with KPN BRI ISDN in The Netherlands. I am using bristuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode

Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use

On Friday, March 31, 2006 3:52 PM Chris Earle wrote: > I'm wondering if I should be using zapHFC with my Junghanns card > instead of qozap? Why would you want to do that? Sorry if I missed the start of the problem but qozap is what you want to use with your Junghanns card (at least if you want to stay with zaptel/libpri). > Everyone always mentions zaphfc -- mostly I >

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

Hi there I am in the UK.. and am running latest asterisk on FC1 (2.4 kernel). I would like to know what the best option is for a 4 port BRI card. I notice Digium don't provide one.. I have heard the Junghanns do one...but are there others ?? Is the Junghanns card reliable/stable with good sound quality ?? I notice it is very expensive in a per port comparison with the Digium cards.... hence

Klaus-Peter (while hardly able to see through my watery eyes), You've earned yourself a (potentially rackmountable) 19" Dutch cheese as soon as the zaptel driver is finished and tested. In fact, I don't even have to mail it, I can pratically bring it over ! Although I'll be monitoring your site on a 24hrs/day basis from now on, please keep me posted on both the driver and the 4

hello, I have a Junghanns QuadBRI card in my asterisk server. I'm able to dial & connect to local numbers through the ZAP interfaces however when I try to dial national numbers with the according area code the connection fails, an intense BRI debug is shown below. The error being Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) about half way through the

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have. What ISDN card would be reccommended? My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this? What BRI solution would be

Hi, I have a couple of questions about Quad-BRI solutions for Asterisk, and was hoping that I might get some feedback based on other people's experience. We currently use the Junghanns card, which is a pure Zaptel solution, which is fantastic, but they have no hardware EC solution, and their drivers are becoming increasingly un-stable with time (I back-port to a modified qozap driver from

Hi All I have a Junghanns BRI 4 port installed where only the first channel of each line is working i.e. channels 1 and 4 work but 2 and 5 don't. Our config is the same on this box as 15 other similar installations where all works well. the only error I see is in /var/log/messages: Jun 28 15:49:31 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:51:27

> Appreciate the replies everyone -- really > > I'm wondering if I should be using zapHFC with my Junghanns card instead > of > qozap? Everyone always mentions zaphfc -- mostly I guessed because they > are > using a zaphfc-compatible card ----- but *maybe* I should try that instead > of qozap??? > > And yep -- totally know about the module load order thing and

Hi, I plan to setup an * Server with a TE10P PRI card as E1 and a BN4S0 4 Port BRI card in one box. I tried it first with the bristuff drivers from Junghanns. The BRI card worked fine alone, but as soon as I load the zaptel driver for the TE110P the BRI card says, that the port is down. So I tried it with mISDN. But it seems that this stuff is still unstable (Asterisk refuses to start at first

Hi, I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? What would you buy ? Thanks in advance, Regards, Rob.

Yes, i know that there are many ISDN card on the market. But when i spend money for ISDN card, i prefer to be Digiums, to get all support and help Asterisk :).

Hi All, Has anyone had experiences with Asterisk and ISDN Gateways or cards? I am looking to setup a home phone system using asterisk and am looking to convert my two existing no's to a single isdn2e line. I was wandering if anyone could recommend which is better to use with asterisk - ISDN Card or gateway? also which brands are best with linux/asterisk? I have used eicon BRI cards for

I would like to know how to install asterisk 1.0.9 with zaphfc working on a SuSE 9.2. I tried this: - The rpms with SuSE 9.2 are asterisk 1.0.6 - bristuff works, except for zaphfc, which doesn't compile. - The official asterisk download file doesn't contain isdn bri support Any ideas? Lars Dybdahl.

Hi everybody, I'm strugling between two devices: the both TE but one was set up as a TN. I have no current on that interface. I have tried to find some circuit over the net to power the connection, both commercial and home made. Can anybody give some hint? Ciao Mauro

Hi I've got a few 8 port Junghanns BRI ISDN cards. Dialling in and out is working fine but the Telco's busy or invalid number indications are not being passed through to the user. I have priindication=passthrough in my zapata.conf but this doesn't seem to help. I'm using Asterisk 1.2.13, Zaptel 1.2.10 and Bristuff 0.3.0-PRE-1v. This is happening on three different boxes that