similar to: Pickup zap issue

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

Is it possible to display the incoming calling number on a handset when trying to pick up a call from another handset? I currently have Call Pickup working using *8, I have also used the PickUp application successfully but I'm not sure how to use these features so the handsets show the incoming calling number and not the number that you have dialled to pick up the call. Regards David

The problem: T100P connected to an Adit600. Channel 1-16 are FXS, 17-24 FXO. I have Zap/24 in callgroup 3 and Zap/1-16 in pickupgroup 3. When a call comes in on Zap/24 I cannot pick it up with *8 from Zap/1-16. *CLI> show version Asterisk CVS-04/27/04-23:48:08 built by root@tuck on a i686 running Linux The zapata.conf and extensions.conf are located here:

Hi, > Does anyone of you has a working configuration with SNOM phones that are > able to pickup a call from a flasing LED? Unfortunately (as far as I'm aware) this is a bug in the 1.4.17 release, and therefore I don't think any config changes will fix it. We've been told to roll back to our previous 1.4.13 installation. It also seems to manifest itself in "ghost

Hi, I'm wondering if it's possible to get Caller ID information from a Call Pickup. specifically on a Cisco 79xx SIP handset. I've setup a speed dial line on my 7940 to dial *8 so I can quickly pickup a call, but because the 7940 initiates the call the information on the screen is "To: *8" I gather because of the call setup it's probably not possible to

Paul Madley wrote > >Unfortunately (as far as I'm aware) this is a bug in the 1.4.17 >release, and therefore I don't think any config changes will fix it. >We've been told to roll back to our previous 1.4.13 installation. It >also seems to manifest itself in "ghost ringing" as I've called it; >place a call to a SIP extension, then put down the

I was wondering if someone could help me with this, I've searched high and low to find more info but with no success. When I want to transfer a call from another ringing sip phone to my sip handset I dial *8. This works but the caller ID shows up as *8 on my handset. What I want to do is be able to have the original caller id come up on my SIP phone rather than *8. There was a page on

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Reason. I have a fax/ans phone with handset, that lets you monitor the caller, so if you wish, you can pickup the call. The asterisk is undergoing testing, it will then be online tested at the house so I can get more familiar in setting components up, e.g. sip phones, voicemail, transfers etc. But, I really need the monitoring of the Voicemall being left, with the ability to pick up the

> -----Original Message----- > From: Jerry Geis [mailto:geisj@pagestation.com] > Sent: September 8, 2004 2:19 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] T100P calls with playback starts speaking > before pickup > > > Hi > > I am using a T100P connected to a panasonic phone switch using T1 and the > switch has 4 analog lines

Hi all, how can I pickup a call from a queue? Which context parameter do I have to specify? The context that calls the queues application is ext-queues. This is what I tried so long (777 is the extension of the queue I want to pickup from): exten => _**ZXX,1,Noop(Attempt to Pickup ${EXTEN:2} by ${CALLERID(num)}) exten => _**ZXX,n,Pickup(${EXTEN:2}@from-did-direct) exten =>

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Looks to me your server is hacked through the webserver of website. Stop apache, flush the postfix queue, are there new mails entering you postfix queue? If not, hunt down the leak, if it does, its not apache2 ;-/ Greetz, Louis > -----Oorspronkelijk bericht----- > Van: HomerWSmith at lightlink.com > [mailto:owner-postfix-users at postfix.org] Namens Homer Wilson Smith >

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I have a TDM400 in the server. I want to press **1XX to pickup a call. It is ok if I pickup a call dialled from 1XX to 1YY (internal network call). However, it is failed to pick up a call from PSTN thro' TDM400 card. It seems I can't guess the correct context of it. How can I know the context of the call using CLI? The default context of the TDM400 is from-pstn but pickup still

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Hi there, i have a Problem with the Pickup command. Versions: asterisk 1.4.1 on gentoo my extensions.conf [only the interesting part]: [incoming_1] exten => 123,1,Ringing exten => 123,2,Dial(SIP/xxxx,20,r) exten => 123,3,wait(90) exten => 123,4,hangup [incoming_2] exten => 456,1,pickup(123@incoming_1) both are sip-accounts and have pickupgroup=1 in the sip.conf so my idea is,

Hello, We have a situation where a call comes in, users are notified via an external process (curl request to web service), and we can't answer the call until a callee can call in and pickup the call. How can we implement this functionality? We tried using : [caller-inbound-leg] ; code to send the CALL_UUID information to users. exten =>