Kris Boutilier
2004-Sep-08 15:05 UTC
[Asterisk-Users] T100P calls with playback starts speaking be fore pickup
> -----Original Message----- > From: Jerry Geis [mailto:geisj@pagestation.com] > Sent: September 8, 2004 2:19 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] T100P calls with playback starts speaking > before pickup > > > Hi > > I am using a T100P connected to a panasonic phone switch using T1 and the > switch has 4 analog lines connected to the CO or real world. When I call > internal extensions my playback message does not start speaking until Ipick up.> When I call 9 and the number to call my cell phone and playback a messageit starts speaking right> after dialing. > I does this behavior with or without callprogress enabled. >{clip} When dialing internal extensions the PBX can follow the progress of the call right down to the state of the handset - this information is conveyed back over the T1 using whatever signalling protocol is configured (E&M, PRI etc.). However calls through the analog trunks are considered 'connected' by your PBX as soon the analog line is up. As I understand it you would need to have T1/PRI signalling coming in to your PBX from the Telco for it to be able to understand what's happening ont he other side of the telcos central office systems. Hope that helps. Kris Boutilier Information Systems Coordinator Sunshine Coast Regional District
Seemingly Similar Threads
- Monitored outbound dialing via Zap interface?
- Is there a way to get inserted into an LEC's CLIDB?
- Hangup() doesn't always when talking to Nortel Norstar over CT1 E &M wink-start trunk line?
- SNMP instrumentation and/or talk path health monitoring?
- Why is it called 'Comedian Mail?