similar to: meetme public

Let me lay it out for you.... Call comes in over a T1 - Signal is em_w. The extension is seen as *<callerid>*<last 4 digits of number being called>*. Which is fine in it self. I have my extension.conf file set up as follows... [did] ; Receive call as *<calling>*<called> exten => _.,1,Answer exten => _.,2,Cut(CALLING=EXTEN,*,2) exten =>

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

im really newbie, and i have a siemens digital pbx work in my work. i have 4 outside lines and the pbx has a E1/PRI card. what i need to ask my siemens provider(techinicians) to do in the pbx? i only have in my pbx the 9 to get a line to go outside is very simple. but i dont know what i need to ask them to programming. please help me. -- .- Pablo Allietti LACNIC

Hi guys, Sorry if I'll be very very stupid but really I write to this conference first. I have problems with configuration of app_meetme in realtime environment. I use last stable release of asterisk 1.6.0.3 Now situation is following. I create database and table in it. Th table is CREATE TABLE IF NOT EXISTS `booking` ( `bookId` int(10) unsigned NOT NULL auto_increment, `clientId` int(10)

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Hi, excuse me if my problem is something obvious, but I'm lost and couldn't find any useful information (is there a search function for the list archive?). Im new to Wine (and only recently switched to Linux). Problem: I'm trying to run the Britannica Encyclopedia 2000 (BCD2000), but when I start it I get the error message (in a popup window) "Unable to start the application

Hi All, I was able to insert some extensions in Mysql DB and use them successfully. In Mysql extensions table the priority column is of type tinyint and when I give 's' value for it, it is not accepting that value as it takes only tinyints. Please tell how can I make that column accept values like t,s,i and make it work with asterisk in realtime without any problem? If I change the type

I am having problems sending and receiving calls over the T1. They never seem to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no errors on the line. Any ideas on what is wrong? I have tried a variety of fxsks and fxoks configurations without avail. This is a single asterisk@home system with a single T1 card. Robbed Bit T1 ami, d4. ------------------inbound call

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

? stato filtrato un testo allegato il cui set di caratteri non era indicato... Nome: non disponibile Url: https://stat.ethz.ch/pipermail/r-help/attachments/20060627/84d9bd54/attachment.pl

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

Hi, If I do this in extensions.conf exten => 411,1,Dial(IAX2/hhandresen@iaxtel/18005558355@iaxtel,40,rS(10)) the line is cut of in 10 sec., thats fine, but in CDR I got dst as T, and not 411. How can I handle this so I still get kicked of after 10 sec., but get 411 as dst in my cdr ? -- mvh. Hans-Henrik Andresen

After reading this article: http://www.theregister.co.uk/2005/08/31/blocking_chinese_ip_addresses/ I got to thinking that there is really no reason for *any* traffic to hit my servers that comes from anywhere outside North America. So I wrote the perl script at the end of this posting to extract selected IP ranges posted at iana.org and convert them into iptables rules blocking any traffic

hi all i have a te110p installed in my system with a lot of Echo.. i decide to install the oslec echo supressor but when y try to add the module i have this problem. [root at asterisk zaptel-1.4.7.1]# insmod wct1xxp.ko insmod: error inserting 'wct1xxp.ko': -1 Unknown symbol in module [root at asterisk zaptel-1.4.7.1]# some advice? thanks. -- .-

Hi list I am discovering R, and -- PhD candidate in Computer Science Address 3 avenue lamine, cité ezzahra, Sousse 4000 Tunisia tel: +216 97 246 706 (+33640302046 jusqu'au 15/6) fax: +216 71 391 166 [[alternative HTML version deleted]]

Hi all, I''m sure you''re all wondering what the heck is going on with development and why there are so many open tickets. Hopefully this email will answer those questions for you. REST Development ====================== First, I''ve found the REST work to be significantly more complicated than I''d feared. The plumbing is nearly all done and the majority

This is what happens when i run the ./tools/wineinstall WINE Installer v0.74 Running configure... configure: creating cache config.cache checking build system type... i686-pc-linux-gnuoldld checking host system type... i686-pc-linux-gnuoldld checking whether make sets $(MAKE)... yes checking for gcc... no checking for cc... no checking for cc... no checking for cl... no configure: error: no

I'm in the process of turning up a PRI in one of my markets and have run into a problem I have never seen before. I am unable to place a local outgoing call. Long Distance over the same PRI works fine. When I attempt to place a local call using the PRI I see Asterisk attempt to dial, and am greeted with a busy signal. This signal appears to originate on the telco's switch. I have had

Hi everone, I currently try to test the Opus codec. It seems, however, that it is more easy to do that in Linux. Nevertheless, I have compiled the sources in Visual Studio 2010. Here are some hints: 1) "static inline int function(...)" (combination of static and inline) does not work with Visual Studio 2010. I defined a macro which translates all "inline" to nothing. 2) I

hi there! I have a couple phones connected to a sipura ata and if I go into *- IVR, I press options on the regular phones and it all works fine and dandy. then I connect an xten softphone, a new extension in my dialplan, I dial the ivr, * asks me to dial something to go through it, I press keys on xten, but nothing happens, * just times out through as if I did not press anything! is there some