Robert Wagner
2005-Sep-14 08:45 UTC
[Asterisk-Users] TE110P - Asterisk@Home Install Problems
I am having problems sending and receiving calls over the T1. They never seem
to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no
errors on the line. Any ideas on what is wrong? I have tried a variety of
fxsks and fxoks configurations without avail. This is a single asterisk@home
system with a single T1 card. Robbed Bit T1 ami, d4.
------------------inbound call
-- Starting simple switch on 'Zap/7-1'
-- Starting simple switch on 'Zap/14-1'
-- Executing Playback("Zap/7-1", "vm-goodbye") in new
stack
-- Playing 'vm-goodbye' (language 'en')
-- Executing Macro("Zap/7-1", "hangupcall") in new stack
-- Executing ResetCDR("Zap/7-1", "w") in new stack
-- Executing NoCDR("Zap/7-1", "") in new stack
-- Executing Wait("Zap/7-1", "5") in new stack
-- Executing Playback("Zap/14-1", "vm-goodbye") in new
stack
-- Playing 'vm-goodbye' (language 'en')
-- Executing Hangup("Zap/7-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on
'Zap/7-1' in macro 'hangupcall'
== Spawn extension (default, s, 2) exited non-zero on 'Zap/7-1'
-- Hungup 'Zap/7-1'
-- Executing Macro("Zap/14-1", "hangupcall") in new
stack
-- Executing ResetCDR("Zap/14-1", "w") in new stack
-- Executing NoCDR("Zap/14-1", "") in new stack
-- Executing Wait("Zap/14-1", "5") in new stack
-- Executing Hangup("Zap/14-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on
'Zap/14-1' in macro 'hangupcall'
== Spawn extension (default, s, 2) exited non-zero on 'Zap/14-1'
-- Hungup 'Zap/14-1'
----------------------------
------------------outbound call
-- Executing SetVar("SIP/4901-cd04", "OUTNUM=mynum") in
new stack
-- Executing Cut("SIP/4901-cd04", "custom=OUT_1|:|1") in
new stack
-- Executing GotoIf("SIP/4901-cd04", "0?19") in new
stack
-- Executing Dial("SIP/4901-cd04", "ZAP/g0/mynum") in
new stack
-- Called g0/mynum
-- Zap/1-1 answered SIP/4901-cd04
-- Hungup 'Zap/1-1'
---------------------------
[zaptel.conf]
span=1,1,0,d4,ami # have tried with 1,0,0 - same problem
fxsks=1-24
loadzone = us
defaultzone=us
[zapata.conf]
[channels]
signalling=fxs_ks
group=0
;context=incoming
channel=>1-24
echocancelwhenbridged=yes
echotraining=400
context=default
faxdetect=incoming
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050914/7f846c14/attachment.htm
Pablo Allietti
2005-Sep-14 11:29 UTC
[Asterisk-Users] Re: TE110P - Asterisk@Home Install Problems
On Wed, Sep 14, 2005 at 10:45:36AM -0500, Robert Wagner wrote: hi te110p is a et1 card. your sigfnalling is wrong i think i have the same card and is work with this conf /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone = us defaultzone = us /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] context=from-pstn rxwink=400 ; Atlas seems to use long (250ms) winks relaxdtmf=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes ;group=1 ;callgroup=1 ;pickupgroup=1 signalling=pri_net ; pri_cpe = PRI slave ; pri_net = PRI master ; national: National ISDN 2 (default) ; dms100: Nortel DMS100 ; 4ess: AT&T 4ESS ; 5ess: Lucent 5ESS ; euroisdn: EuroISDN ; ni1: Old National ISDN 1 switchtype=national echocancelwhenbridged=yes echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds callerid=asreceived group=1 ;context=default ; Points to the default context of your extensions.conf channel => 1-15,17-31 ; Set this to 1-15,17-31 for E1> > I am having problems sending and receiving calls over the T1. They > never seem to connect - outbound keeps ringing, inbound gets busy. > The T1 looks ok - no errors on the line. Any ideas on what is wrong? > I have tried a variety of fxsks and fxoks configurations without > avail. This is a single asterisk@home system with a single T1 card. > Robbed Bit T1 ami, d4. > > ------------------inbound call > -- Starting simple switch on 'Zap/7-1' > -- Starting simple switch on 'Zap/14-1' > -- Executing Playback("Zap/7-1", "vm-goodbye") in new stack > -- Playing 'vm-goodbye' (language 'en') > -- Executing Macro("Zap/7-1", "hangupcall") in new stack > -- Executing ResetCDR("Zap/7-1", "w") in new stack > -- Executing NoCDR("Zap/7-1", "") in new stack > -- Executing Wait("Zap/7-1", "5") in new stack > -- Executing Playback("Zap/14-1", "vm-goodbye") in new stack > -- Playing 'vm-goodbye' (language 'en') > -- Executing Hangup("Zap/7-1", "") in new stack > == Spawn extension (macro-hangupcall, s, 4) exited non-zero on > 'Zap/7-1' in macro 'hangupcall' > == Spawn extension (default, s, 2) exited non-zero on 'Zap/7-1' > -- Hungup 'Zap/7-1' > -- Executing Macro("Zap/14-1", "hangupcall") in new stack > -- Executing ResetCDR("Zap/14-1", "w") in new stack > -- Executing NoCDR("Zap/14-1", "") in new stack > -- Executing Wait("Zap/14-1", "5") in new stack > -- Executing Hangup("Zap/14-1", "") in new stack > == Spawn extension (macro-hangupcall, s, 4) exited non-zero on > 'Zap/14-1' in macro 'hangupcall' > == Spawn extension (default, s, 2) exited non-zero on 'Zap/14-1' > -- Hungup 'Zap/14-1' > ---------------------------- > > ------------------outbound call > -- Executing SetVar("SIP/4901-cd04", "OUTNUM=mynum") in new stack > -- Executing Cut("SIP/4901-cd04", "custom=OUT_1|:|1") in new stack > -- Executing GotoIf("SIP/4901-cd04", "0?19") in new stack > -- Executing Dial("SIP/4901-cd04", "ZAP/g0/mynum") in new stack > -- Called g0/mynum > -- Zap/1-1 answered SIP/4901-cd04 > -- Hungup 'Zap/1-1' > --------------------------- > > [zaptel.conf] > span=1,1,0,d4,ami # have tried with 1,0,0 - same problem > fxsks=1-24 > loadzone = us > defaultzone=us > > [zapata.conf] > [channels] > signalling=fxs_ks > group=0 > ;context=incoming > channel=>1-24 > echocancelwhenbridged=yes > echotraining=400 > context=default > faxdetect=incoming > > ;Include genzaptelconf configs > #include zapata-auto.conf > > ;Include AMP configs > #include zapata_additional.conf> _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users---end quoted text--- -- .- Pablo Allietti LACNIC