similar to: E1 hardware for asterisk

Hi, To solve echo problems, I'm considering 2 alternatives. 1> Sangoma A104d - I can't find support for asterisk 1.2.1 2> Desktop echo canceller - http://www.oriontelecom.com/echo_canceller/desktop/e1_ec_desktop.html - I want to know where to buy and price. Any suggestion is appreciated. Thanks. Jason. p.s. : asterisk cli command "reload" can change rx_gain and

Hi guys, Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? The pbx doesn't have sip and I want to come in off of a sip trunk and interface with the older system. I know I can use a pri card to hook in to the phone network, but can I use this same card to feed back the signaling as if I were the phone company to the older system? Thanks, Tom

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Has anyone had experience with one or both of these cards? I'm in a position where I might need to recommend one over the other. I've read everything that I can find online, so now I'd like to hear of personal experiences. Everything I read on both cards is "5 stars! Awesome! It Rocks!" They both seem to have similar capabilities, similar pricing, etc. Could those of

Hi All, I have read many posts about problems with Asterisk on some systems. I also set up Asterisk on many different boxes. But I have never seen the following... There is an IBM X346 (3.4GHz Xeon) with one Sangoma A104. This system is currently idle, that means there is nothing running except Asterisk (1.2.7.1). We are handling no calls now, but if I do a vmstat, I get peaks in system load up

I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4 and asterisk 1.4.23 using a Te210P card. the phone guy is saying that the lines are reporting always BUSY. however on my end the status shows OK. Anyone seen this? Is there something different about connecting PRI to siemens hipath? system.conf shows: loadzone=us defaultzone=us span=1,1,6,esf,b8zs bchan=1-5 dchan=24

Hello List! I wanted to share to everyone the following compatible connectivity products that my company installed in our Asterisk based soft switch. I already sent these to the Asterisk.org site many days ago but for some reason they still have to post it. 1. Sangoma A101 single port E1/T1/PRI Card 2. Sangoma A102 dual port E1/T1/PRI Card 3. Sangoma A104 quad port E1/T1/PRI Card 4. Sangoma

Good day all Is there someone that's got asterisk working well with a A101/E1 card Apparently they don't have RBS support? Please advice Thanks Altus

Hi all, We need to get better echo cancellation on an Asterisk gateway. Currently it has two TE410P (1st gen) cards. So would it be possible to just buy two VPM450M cards ? Or do we need to buy two new TE412P cards ? In that case a Sangoma A108d card would be nice as well ? What configuration gives the best audio quality ? Thanks, Leon de Rooij leon at scarlet-internet.nl

I wont say we are extremely high volume (40 concurrent calls) but I get occasional complaints about quality. Setup (at same location): Asterisk 1.4.26.2 FrontEnd Asterisk 1.4.26.2 Gateway with Sangoma A108D card with 2 PRI and LDT1 Connected via IAX2 trunking on its own VLAN Is IAX2 the way to go or would SIP trunking be better. I know its a pretty vague question but I am just trying to

Greetings folks- I'm experiencing issues with a freshly installed box. When a call comes in via PRI (Sangoma AFT-A104), I see this in my logs: [Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 12 (Invalid argument) [Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 8 (Invalid argument) [Dec 15 14:26:10]

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

Hello, I would like to convert an objects list such as objects() or ls() that outputs "a101" "a102" "a104" "a107" "a109" to read within a list statement as follows : list(a101,a102,a104,a107,a109) Thanks Tony

Hai, The steps shown here dont work? https://wiki.samba.org/index.php/Demoting_a_Samba_AD_DC If that is the case and you besides that free of errors. Then upgrade, and try again once your on at least samba 4.9 or 4.10. As im hoping you are upgrade straight to Buster. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens

On 02/10/2019 13:52, L.P.H. van Belle via samba wrote: > samba-tool dbcheck --cross-ncs --fix > Yes, should be possible, but i normaly do that after i do the following. > > search for : > CN=58eba604-07e5-4c5d-a104-9e6f4907248f > And > CN=16b8c008-6c59-4b65-9f1b-530751904a75 > > In _msdc.dom.tld. > Verify which GUID is removed, you can see that, then remove the old

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI

Hi all, I am wondering what people are doing for security when registering IP phone's remotely if you do not have the equipment to do a VPN tunnel at the remote site. The phone I would be working with mainly is the Polycom lineup. Thanks, Connor Spiess -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Digium does not provide snmp support to monitor their cards ! Anybody has tried Sangoma product A104 Quad T1/E1 or others ? Regards harry ___________________________________________________________________________ Yahoo! Mail r?invente le mail ! D?couvrez le nouveau Yahoo! Mail et son interface r?volutionnaire. http://fr.mail.yahoo.com

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create