similar to: Call parking from legacy PBX over PRI??

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Hello, Recently we have been using asterisk 1.6 and everything worked ok, all our productions server are 1.6. Recently we have upgraded one to 1.8 and multiple parking call are not working, which worked pretty ok on asterisk 1.6. Are there any major changes in asterisk 1.8 related to park call and multiple parking lots. Bellow is my config from asterisk 1.6 which worked, I`ve tried this in 1.8

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

Has anyone managed to get multi-parking lot call parking working correctly? I've had several attempts at it, and never seem to be able to get it to go properly - (actually, at all): I've most recently done this with 1.6.1.x, and now 1.6.2.x, with no luck in either case. What I've been "trying" is the following: features.conf [general] parkext => 100 [featuremap]

I am having trouble getting park to work with SIP, I have these config files: /etc/asterisk/parking.conf [general] parkext => 8540 parkpos => 8541-8555 context => parkedcalls parkingtime => 45 /etc/asterisk/extensions.conf include => parkedcalls include => default [default] exten => 3874,1,Dial(SIP/3874|20|tT) Do I need something else somewhere? Is anyone using park and

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

Anyone having trouble parking calls? I haven't tried it in a while, but it seems to have stopped working. If I dial 700, I get a invalid extension. I have "include => parkedcalls" in the correct context, and I can dial 701, which tells me no call is parked there. Any ideas? Parking.conf is stock.

>From discussions with the receptionist staff, this is what we need: X number of buttons for parking slots. These buttons should be lit when a call is parked there. When on a call, just pushing an unlit button will park the call. (The do not want to hit hold, transfer, etc.) Hitting Transfer and the button would most likely be OK. To pick up a call, they can push the parking slot button. The

Hi, Can anyone tell me if Asterisk sets some variable when doing a call parking (when someone presses an exten set in features.conf). In can't find this information on a wiki. Cheers ;) Andrew

We're using Grandstream GXP-2000 with programmed buttons to the first 5 parking lot extensions. When a call is parked, whichever parking lot extension it's parked on lights up red. We've never used the "announce" part and I'm wondering if there's an option I can't seem to find to disable the announce so the transfer happens faster. Thanks for any help, Ken

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I have the standard parking.conf but extension 700 doesn't show up in my dialplan.... Why? I can dial 701 which tells me that I don't have any calls parked there. 700 just gives me invalid extension noise.... Should I have extension 700 defined elsewhere? Thanks parking.conf [general] parkext =a 700 ; What ext. to dial to park parkpos => 701-705

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi: I want to make parking calls easier for my hard-working users. Is there a way to make the Polycom call park feature work with Asterisk? In case it just works out of the box, I haven't tried it yet; but the "call park" feature isn't enabled on the Polycom phones by default. -Stephen-

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

Hi I'm trying to get the rebuilt parking functionality to work in Asterisk 12.0.0. In Asterisk 11.6.0 I managed to get a call to get parked by adding a dynamic feature in features.conf for the DMTF sequence *# which called a macro in extensions.conf, which then runned the ParkAndAnnounce application, and the call got parked. The syntax for ParkAndAnnounce I used was this (I don't

Is there any way to have Asterisk call an extension in dial plan instead of original extension after timeout? Like extension A puts the caller in parking lot, he leaves the phone and forgets about it, instead of having that phone rings after timeout, have a group of phones rings. -------------- next part -------------- An HTML attachment was scrubbed... URL: