similar to: Dreadful results from zttest with TE210P and Dell 2850?

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

OK... maybe I got a little anxious and ran out and bought a Tyan GX28 with dual Opteron (dual core) processors. (It is a nice server ;) ) I did neglect to find out that you can not manually set the IRQ's on this motherboard. I am now stuck sharing an IRQ with the ethernet controller and no foreseeable end to my dilemma. I have a Digium TE210P and zttest consistently runs at 99.97% which

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

Hi, I have a TDM400P running with only one FXO port running on a VIA EPIA MS10000 (1Ghz Via Eden). When I run zttest from Zaptel 1.2.1 it hang and when I interrupt it with Ctrl-C that is the result: ?anyone have some idea about why isn't working? Some additional info: # /usr/src/zaptel/zttest -v Opened pseudo zap interface, measuring accuracy... --- Results after 0 passes --- Best:

Another request make me test my t1 card, which has no quality problems, but all that I get is: [root@SIP2-MI zaptel-1.2.1]# ./zttest Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hi! We (an astronomical center) are building a small cluster for our number-crunching. The problem is that we have 12 mobos A7V600 by Asus (for athlons) - 1 server + 11 diskless nodes. And here comes the trouble... hardware: mobo: a7v600 net: 1 gigabit by 3com - 3c940, integrated in mobo the problem is: dhcp - works fine tftp - works fine pxelinux.0 - downloads fine (I hope) linux kernel -

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

How has experience in Asterisk voip provider? I am trying to setup a reliable Linux system with Asterisk for a voip provider. Therefore I got two more or like identical systems. System 1 AMD Atlhon XP 2200 Asus A7V600-X bios 1002 1Gb memory 333 Mhz Asus 7100 videocard 120GB harddisk System 2 AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40

Our asterisk system gains access to the PSTN through a voip provider. We have no digium or other telephony hardware in our system. Do the zttest results still matter to us? Our results were as follows: --- Results after 1007 passes --- Best: 100.000000 -- Worst: 99.780273 -- Average: 99.975763

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

I am having trouble with zttest on a Tyan board, dual AMD Opteron's on FC3. Tried different kernels, no IRQ sharing, everything looks in order. My zaptel modules load fine, but if I run zttest, it just hangs. Below is the strace output and you can see where it stops. Anyone have any ideas? [root@asterisktest zaptel]# strace ./zttest execve("./zttest", ["./zttest"],

Hi all, I'm unable to complete the installation of zaptel. I did a checkout today from cvs. When I do make clean; make install. It gives me an error at this portion of the installation: /include/linux/modversions.h -DSTANDALONE_ZAPATA -c wct4xxp.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am stuck in a situation where I have two te110p's and really need a te210P. Anyone interested in a trade? They are in working condition guaranteed. If this is the wrong forum for this, I am sorry... I will take it off list. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Thunderbird -

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

Hello! While performing some zttest's for some time today, I was also keeping an eye of a top of the machine. While the zttest was running, I also had a ssh-keygen and a dd creating a 5GB file on an EXT3 partition running. I noticed that for the most part, I got a decent number of 100%'s, and a bunch of 99.6%'s or higher. However, it seems that whenever the zttest dropped

Dear all I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI asterisk think PRI_CPE and remote end also CPE i have configure /etc/zaptel.conf span=1,1,0,ccs,hdb3

Hi all, I'm going to configure a middle asterisk installation. I'll use a TE210P to connect a T1 channel bank and a PRI E1 line. I'm thinking on using a SuperMicro P8SCT Mother Board that has a 1x 64-bit 133MHz PCI-X 3.3V. In TE210P documentation I've read: The TE210P is a 32-bit 33MHz card keyed for 3.3 volt operation. Can SuperMicro slot (that is a 133Mhz slot) be used

Has anyone every attempted to set up a mini PC to achieve much the same functionality as the fonebridge box? The sort of thing I'm imagining is a micro itx board & case in a completely solid state configuration (flash disk, maybe a psu fan but only if really required), with a TE210P (or equiv) card(s). The sole purpose of this would be to be a bridge between E1 lines and TDMoE. The

Hi I am trying to build reliable fax solution with asterisk, iaxmodem and hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3 1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After installing the newest zaptel and wanpipe-3.1.0 beta I did zttest and it didn't give me good results: 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%