similar to: OT: Polycom IP501 and Speed Dials

Hey guys, Is anyone aware of a single PRI (E1) card that has onboard hardware echo cancellation? I can only seem to find 4-port cards (Digium and Sangoma) and I really don't need the other three ports. Thanks, Avi -- National Manager - Special Projects < Sydney / Melbourne / Canberra / Hobart / London /> 2/340 Gore Street T: +61 (0) 3 9486 0411 Fitzroy, VIC F:

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports

I have used a channel bank to mux together BRI's and partial PRI's to a single PRI to avoid the goofyness of chan_capi. The focus of Asterisk support is geared to PRI's, it seems. -----Original Message----- From: Avi Miller [mailto:avi.miller@squiz.net] Sent: Thursday, June 15, 2006 7:50 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] what

Using FTP to configure 501. Gets past "Running... App = sip.ld" and: Welcome! Processing configuration... "This may take a few seconds." Then it displays: Config file error Error is 0x4020 and reboots continuously, repeating the above. Anyone seen this before? Is this a corrupt *.ld file? An FTP error? (PASV)? A missing SETUP setting? Thanks! -- Jim Rice by Design

Hey gang, I'm hoping someone can help me out here. I've just noticed that on two of my five Asterisk boxes (CentOS 4.4, Asterisk 1.2.12.1), I'm getting the following translation cost for g729: asterisk*CLI> show translation Server 1: g729 - 26 25 25 25 25 24 26 - 53 36 Server 2: g729 - 66 65 65 65 65 64 69 -

Greetings, Has anyone noticed that attempting to place a call from the "Placed Calls" list on a Polycom IP501 by pressing the 'Dial' softkey sometimes simply returns the phone to the idle screen? It is not related to the number being dialed, as we have observed two entries for the same number, one of which worked and the other didn't. We've experimented with calls

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

This is my first foray into SIP telephony, so be gentle. :-) The Polycom SoundPoint IP 501 phones have been fantastic so far. I still have a lot to learn when it comes to them, but the manual seems pretty extensive and so far Asterisk has been playing well with them. I have a need to be able to identify incoming calls based on some factor (could be time of day, caller ID, dialed number, it

I am doing some experimenting with Asterisk 1.0.9 and Polycom IP501's. I have the extensions setup, and everything is working well up to this point. Now, I want to setup my system so that a user at an extension can start a recording on demand. I have tried various Google searches, but am coming up empty. Could someone point me in the right direction, or have some sample Polycom/Asterisk

Hi, I have lookedaround and don't see this anywhere. Is there a way to tell the ip500 to not make the aural MWI blips?

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any

Hi All - I noticed that the Polycom IP501's are now shipping. Has anyone gotten one yet, and if so, what's different about the phone? Any UI improvements, or is it just better hardware? Thanks, Noah

Greetings, We are trying to make our corporate directory (around 400 entries) available via TFTP to some Polycom IP501 phones. A small (~40 entries or so) file works, but the full file fails to load. Does anyone know what the upper limit on directory entries is? The size of the XML file itself is only 60K - you'd think that would all fit into the phone with no problems..... I would

I remember seeing something like this on the list a while ago, but I'm darned if I can find it. We have a number of Polycom IP501 phones, some of which have more than one registration on them. When a voicemail is left for a phone with only one registration, the MWI lights up and stays lit until the voicemail is listened to. However, on our phones with more than one registration, the MWI

I am starting to get the hang of this, I think. These are more implementation questions; "is this a proper/good way of using/doing this" kind of questions. The IP501 has three line appearances. I have learned that shared line appearances cannot place calls, only receive them. They're indicated by the "half telephone" icon beside the button. Private line

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

I have a Polycom IP501 phone and have set it up to download the config from an FTP server, it did this once and now is in an endless loop of trying to contact the FTP server, failing, then rebooting. When I watch the FTP server logs it looks like the phone starts a session, ends it, starts it, ends it until the phone reboots. It is annoying like nothing I can describe! I have tried Windows 2003

The answer is yes, I think, but I don't recall precisely how off the top of my head, and I'm walking out the door in a moment. The phone will hold more than a dozen distinct ring tones which you can create for yourself, and you can have asterisk direct it to use a ring tone independently of line appearance. The most direct way would be with the SIP Alert-Info field, but the phone itself

BOFH told me he uses it to listen to his co-workers > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To: asterisk-users@lists.digium.com > Subject: SOLVED: Re: [Asterisk-Users] Polycom IP501 with Asterisk - > distinctive

This feature also works on the IP301 phones. The obvious caveat is that it is one-way only. Still nice for an "all-page" though. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To: