Displaying 20 results from an estimated 2000 matches similar to: "Problem getting two x200p cards working on 1.2.4"
2014 Jan 27
1
AsteriskNOW with AX1600P card
Hi all!
I'm new with telephony cards and DAHDI drivers. I have installed
Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too.
I'm following the installation guide of Atcom [1] for AX1600P analogic
card, modules are loaded
[root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi"
netjet 14618 0
isdnhdlc 4523 1 netjet
mISDNipac
2004 Sep 19
4
X100p on VIA EPIA-V problems
Hi All,
I hope I'm posting this to the appriopriate list, and that cross posting
to two lists is OK. (If not, I'm sure I'll hear about it quickly :))
I'm running Asterisk on my (new) VIA EPIA-V motherboard.
This seems to be the ideal platform for a home version of asterisk - its
small, quiet, low power, and should have plenty of computing horsepower
if only it would work!
2005 Aug 04
1
HELP! X100P IRQ conflict w/ USB
PC: HP Vetra VL400
Mainbood: Intel815
BIOS: Phonix 4.0 release 6.0
OS: REDHAT 9.0
I installed the X100P in PCI slot 2 and disable the USB port, serial-port
and parallel-port in BIOS.
I can't found the X100P card in " cat interrupts"
But I can found the card in the "cat ioports"
use "lspci" I found the X100Pcard use the interrupts 11 too. Who can
help me to solve
2007 Oct 03
4
Problem with mISDN and HFC-Cards in Asterisk-DomU
Hello,
I am having problems, getting my asterisk-domU to work properly. It consists
of the following components:
- Debian Etch under Xen-3.1 with a 2.6.18-kernel
- Asterisk 1.2.24
- mISDN-1.1.5
I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in
permissive mode. This is working fine.
The strange problem is, that the two HFC-ISDN-cards are not beeing initialized
by the
2006 May 25
3
X100P fails to initialize
So I took a chance with an X100P knock-off on eBay. I'm running Asterisk +
FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel
2.6.16.16. Everything has been fine up until now.
I compile the 1.2.5 Zaptel drivers without a problem, get the udev
configuration in, modprobe zaptel, and finally modprobe wcfxo. At this
point, I get the message:
ZT_CHANCONFIG failed on channel
2014 Apr 06
2
Assistance in tracking a kernel/nouveau error
Greetings,
I am resending this as it doesn't appear in the archives and no one
responded...maybe it got routed to /dev/null or something :-)
I have asked this question the Scientific Linux mailing list (a few
months ago) and got the suggestion I talk to the kernel guys. I pinged a
kernel guy I know, and his suggestion was to ask the Nouveau list. So
here I am. :-)
I have had my work laptop
2007 Mar 07
1
capi installation problem
Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want to install it to my ubuntu box (kernel:
2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds
this card:
*02:0d.0 Network
2006 Nov 01
19
pciback for usb-controller and usb-storage on x86_64 ends in Oops
Hi!
I tried to pcipassthrough usb-controllers to domu to use it with a
memory-stick.
First xen complained that the driver needs write-access to its
configuration space, so I added these to pci-quirks.
Since it still didn''t work I also added the device to pci-permissive but
I still get an errormessage with Oops (at the end of this email) when
sticking in the memory-stick.
I tried
2006 Nov 01
19
pciback for usb-controller and usb-storage on x86_64 ends in Oops
Hi!
I tried to pcipassthrough usb-controllers to domu to use it with a
memory-stick.
First xen complained that the driver needs write-access to its
configuration space, so I added these to pci-quirks.
Since it still didn''t work I also added the device to pci-permissive but
I still get an errormessage with Oops (at the end of this email) when
sticking in the memory-stick.
I tried
2007 Apr 05
1
BeroNet HFC-4S card is now detected as only 2 ports
Hello list,
After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently
detected as 2 ports instead of 4.
I still load the driver as "modprobe qozap ports=12" as I've always
done. But now it only sees 2 ports.
Output of "lspci -vvv"
------ cut --------
02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-4S] (rev 01)
Subsystem:
2006 Jan 19
1
TDM400P zttest not working
Hi,
I have a TDM400P running with only one FXO port running on a VIA
EPIA MS10000 (1Ghz Via Eden). When I run zttest from Zaptel 1.2.1 it
hang and when I interrupt it with Ctrl-C that is the result: ?anyone
have some idea about why isn't working?
Some additional info:
# /usr/src/zaptel/zttest -v
Opened pseudo zap interface, measuring accuracy...
--- Results after 0 passes ---
Best:
2012 Feb 04
9
XEN 4.1.2+Centos 6.2+Kernel 3.X
Hey hope this opne is a "make senser".
Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm
kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel
support with no success, just a kernel oops and constant reboots.
I followed Fedora''s wiki on building a custom kernel, even used F16''s
.config which also was a
2012 Feb 04
9
XEN 4.1.2+Centos 6.2+Kernel 3.X
Hey hope this opne is a "make senser".
Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm
kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel
support with no success, just a kernel oops and constant reboots.
I followed Fedora''s wiki on building a custom kernel, even used F16''s
.config which also was a
2013 Sep 17
10
RESEND [Xen-unstable][Qemu-xen] HVM Guest reading of Expansion ROM from passthroughed PCI device returns data from emulated VGA rom
*RESEND* due to exceeding the mailinglists limit for attachment size.
Hi,
I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting.
So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter.
- When i don''t passthrough the radeon card, the
2007 Mar 09
2
How do I configure additional serial ports?
I have installed two 4-port serial cards (http://www.startech.com/
Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4
system. The hardware appears to be recognized correctly, as kudzu
added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards
(output of lspci -vv for both cards included at the end of this email):
# lspci
00:00.0 Host bridge: Intel Corporation
2007 Apr 30
1
TDM400P and Junghanns QuadBRI issue
Hi List,
I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI
on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6).
I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4
and asterisk-1.2.17
When it's the time for ztcfg to do its job it complains with
<ZT_SPANCONFIG failed on span 2: No such device or address (6)>
2014 Jul 04
3
How to check for proper MSI support?
I mistakenly only replied to Yijing Wang the first time. Here are the
further details.
uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586
GNU/Linux
Here is the output from lspci -vvvxxx:
root at p5-133:~# cat lspci.txt
00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev
01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
2003 Mar 04
0
Tiger Jet card X100P
To the guy who wanted to know if the Tiger 560 card was a X100P - I don't
think so.
Here's the lspci -vv from a fairly new X100P:
00:09.0 Communication controller: Tiger Jet Network Inc. Model 300 128k
Subsystem: Unknown device 8085:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B-
2014 Jul 03
3
How to check for proper MSI support?
Hello,
A user (cc'd) reported that nouveau's enabling of MSI causes the card
to not work on his setup [1]. I think the situation is that MSI is
just not supported by the underlying motherboard, even though the
card, and probably bridge, support it just fine. It's a very old
board. The nouveau code does:
pmc->use_msi = pci_enable_msi(device->pdev) == 0;
Does it need to do more
2010 Apr 10
2
t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED
Hi everyone.
We have a problem here... Hope somebody can give us some hints.
We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem.
Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and
libpri (1.4.3) is installed.
There is a QuadBRI-Card installed:
# lspci -vv -s 06:04.0
06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)