similar to: One Extension - Two Calls?

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

I have a Polycom IP501 phone and have set it up to download the config from an FTP server, it did this once and now is in an endless loop of trying to contact the FTP server, failing, then rebooting. When I watch the FTP server logs it looks like the phone starts a session, ends it, starts it, ends it until the phone reboots. It is annoying like nothing I can describe! I have tried Windows 2003

On the polycom soundpoint ip 650 six line phone: Say I have 4 lines on hold, is there way to tell who I put on hold. I cannot see the caller ID of the other lines, only the last line I placed on hold. Thanks, --E -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I have some polycom 430's which I'm trying to get to work with asterisk. I have them working for the most port other than one little issue. The 430's have two line appearances. I'm trying to get the second line registered to a different extension but for some reason it's not allowing me to do this. The first line will register fine but the second line never

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

For some reason my voice mail stopped working properly. I was able to go in as a new user, set the password and options and now can never log back in using the password I assigned the mailbox. I can log in through the web interface with that password fine, and the voicemail.conf looks fine but every time I try to check messages I get "Password incorrect please try again" until it

hello I am running Samba 2.2.8 (latest) that I downloaded the binary from the Samba site. I have this problem in older versions of Samba as well. I have under Redhat 8.0 security level = user works fine under NT/2000/XP platforms, but when I try to login from a Windows 95/98/98se/Me machine, samba prompts me for a password to resource \\netbiosname\IPC$ how do I prevent this from happening in

I'm still trying to learn some parts of Asterisk, so sorry in advance for the dumb question! How do I set up an extension to dial out to the PSTN through my ZAP interfaces? I want the ability to have a ring group that will ring all of the phones in an office and then ring cell phones if nobody answers. I'm sure this is simple to do but I'm at a loss. I have tried the following

Ok, I've been trying to figure out why my A@H won't answer the lines when I can call out and the panel shows the call coming in - well something bizarre has happened. I set up inbound routing to ring my extension if a call comes in - and my extension rings but when I pick it up I get a dial tone. The whole time after I answer I hear the phone I originated the call on just ring and ring

Is there a protocol I'm supposed to use here? It seems that people are asking 100 questions a day and SOMEONE is helping them, and I've posted this three times and not even an "I Don't Know". My third repost: Ok, I've been trying to figure out why my A@H won't answer the lines when I can call out and the panel shows the call coming in - well something bizarre has

For the last few months we have intermittently been experiencing some very strange registration problems with certain polycom phones. Here is some background information: I have about 150 Polycom Soundpoint IP 600s, 601s, and 650s spread between 8 servers at different locations. Each phone is on the same network (and subnet) as the server it connects to. There is no NAT or anything else strange

I'm evaluating using Polycom phones for our call center and I've set up my first phone (a SoundPoint 560) to give it a try. The phone is working and can successfully place and receive calls. But every minute, there's an error in the log file: chan_sip.c: Registration from '<sip:6193644850 at jtsd05>' failed for '192.168.200.99' - Username/auth name

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Dear List I am trying to fit a simutaneous equation logit model. i.e., the response variables of the structured equations are binomial, I am not sure if systemfit can do this job. A google search doesn't yield too much helpful information. Your knowledge on any other packages or codes are appreciated. Thanks will

Hi All - I noticed that the Polycom IP501's are now shipping. Has anyone gotten one yet, and if so, what's different about the phone? Any UI improvements, or is it just better hardware? Thanks, Noah

Hi, I'm curious to know how I can programmatically differentiate between a Samba share and a Windows NT share from a Windows program. For both, GetVolumeInformation() claims the file system is "NTFS". This isn't very helpful. I need to be able to tell the two apart because "real" NTFS supports various things Samba's "simulated" NTFS doesn't, such as

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The

Hi, One of my users is in trouble with his polycom phone hooked to an asterisk server. The phone works fine for a few days, and then disappears from the registered sip peers in asterisk. The user is able to place outbound phone calls, but can't receive incoming calls until the network plug is unplugged/plugged. Working line XXYYZZAA24/XXYYZZAA24 10.50.5.186 D A 5060

Hello everybody, I am sorry to bring this up again if this kind of echo issue has ever discussed. Phone2 in below call path experiences quite annoying echo: Phone1 --> FXS (TDM400P) --> Asterisk --> SIP GW --> PSTN --> Phone2 It is annoying as on phone2, we can hear the whole words we say with the level of maybe 25% of the original sound. I can reduce the echo to maximum with