similar to: Asterisk SIP phones to Cisco Unity viaCCM4.0SIPTrunk

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the

Hi, I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and about 45 SCCP phones on the ccm, and 200 users on unity. we want to migrate all users to IP Phones to ditch our ancient phone system. I would love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet and run sip to an asterisk server, but have their voicemail on Unity. these phones are $150 each,

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

In a CallManager environment (currently 4.0, moving to 6.1 in the next few months), can Asterisk completely replace Unity as a voicemail system? What works and what doesn't? MWI? Call Handlers? Does everything work via a SIP trunk? Who has done this and is willing to contact me? Thanks.

Has anyone here any experience in getting an Asterisk box to talk to a Cisco Unity system? I have a potential customer who would like to add a conference bridge to their existing Cisco Unity setup. The digging I have done so far suggests that it should be possible to talk SIP between them, but I'd be interested in any stories of success or failure. Cheers Tony -- Tony Mountifield Work: tony

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

Hi all, We want to put an Asterisk Voicemail Server behind a Cisco Call Manager. The idea is to have Cisco Phones (SCCP) registred to the CCM and the voicemail in the Asterisk Box. The trunk inter PBX is in SIP. My question is: Is it possible to activate MWI LED from the Asterisk to the Cisco Phones registred to the CCM when they receive a new voicemail ? Thanks in advance Fred

Hi all, first post. My company's office in the UK is soon going to get a Cisco VoIP solution system. What I am interested in, and couldn't find googling, is if it is possible to connect an Asterisk solution to the Cisco system and have all the nice advantages of it (mainly calling the extensions and directly reach the other office). Thanks, have a nice day Simone

Like some other people on here, I am trying to integrate Asterisk for VM with CCM version 3.x. I've got gnugk and Asterisk running, I've got CCM registering with the GK, I've got the voicemail pilot and profiles setup. A call comes into a CCM phone, it rings, rolls to the correct VM on ASterisk and asterisk emails the voicemail and I can check the voicemail, but I cannot get MWI

I am trying to setup Asterisk as the voicemail server for Cisco Call Manager. I have just about everything working except for the message waiting indicator. I have the following setup in context [ccm] in my extensions.conf file: ;MWI exten => _2807XXX,1,SetCallerID(${EXTEN:3}) exten => _2807XXX,2,Dial(SIP/28888@65.202.115.240) exten => _2807XXX,3,Answer exten => _2807XXX,4,Wait,1

Hi all, first post. My company's office in the UK is soon going to get a Cisco VoIP solution system. What I am interested in, and couldn't find googling, is if it is possible to connect an Asterisk solution to the Cisco system and have all the nice advantages of it (mainly calling the extensions and directly reach the other office). Thanks, have a nice day Simone

I understand that softphone are the answer in fact I deploy a ton of the Ip comm version every week. I am under contract with the phones so I can't sell them and there no easy way out of the contract. As for 79XX's I have several office that have them working over a VPN backed in to our main office where the CCM's and GW's are with managable problem and for the most part they

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in

Hi there, While I am Getting Assistance on jump starting Wot... I might as well ask on another topic... The Unity Web player I heard from various rumors That I could be able to Run the unity web player and play browser games with it... However My first attempt went Terribly Wrong... What I tried first was to download and run a Windows version of mozilla firefox through wine and install the Unity

re, all. Here's a bug filed against Google Chrome for the same problem: http://code.google.com/p/chromium/issues/detail?id=80856 and here's some forum users complaining about the same problem, and regrettably their solution is to stop using Ubuntu's Unity mode: http://ubuntuforums.org/showthread.php?t=1742354. I work for VMware and for our Unity mode (which has the unfortunate name

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Installed unity perfectly, no error whatsoever, although when i run it, whatever path i put in it to create a new project in, it says "Specified path is not valid(should be a name of non existing or empty directory). I also tested using Unity Loader, and it shows the splashscreen until it crashes Ubuntu. I'm using Ubuntu 10.10, Maverick Meerkat. I can run it fine on Windows 7, without

Hello, I noticed that in the last period, many gaming companies started to build free games for the online platforms. I think that in the next period of time, they will appear allot of 3d games on social sites. My example is N.O.V.A. from facebook (developed by Gameloft). From my pov it's a very good start for online 3d games. So, what's my problem: I want to play nova on linux, using