Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in the above setup I'm able to call from Asterisk to my CME and vice-versa. here is my problem: when I call from 6004 to my cme extension 4615, on 4615 I've configured noans timeout to 15 and then it goes to my unity express (cue) for voicemail so when I call my cme extension it rings for few seconds and then on my asterisk cli I see "500 Internal Server Error" back from my CCM IP and getting standard asterisk message saying "all circuits are busy now" . as per my understanding it should go to my cue. please advise and let me know if you need any other details. Regards Arun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090520/1e9e4ee3/attachment.htm
Hi All, please provide some help. I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in the above setup I'm able to call from Asterisk to my CME and vice-versa. here is my problem: when I call from 6004 to my cme extension 4615, on 4615 I've configured noans timeout to 15 and then it goes to my unity express (cue) for voicemail so when I call my cme extension it rings for few seconds and then on my asterisk cli I see "500 Internal Server Error" back from my CCM IP and getting standard asterisk message saying "all circuits are busy now" . as per my understanding it should go to my cue. please advise and let me know if you need any other details. Regards Arun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090521/1212870a/attachment-0001.htm
Arun Kumar schrieb:> please provide some help.Do not repost the same question after just 1 day. Do not cross-post. *scnr* Philipp Kempgen -- AMOOMA GmbH - Bachstr. 126 - 56566 Neuwied -> http://www.amooma.de Gesch?ftsf?hrer: Stefan Wintermeyer, Handelsregister: Neuwied B14998 Asterisk: http://the-asterisk-book.com - http://das-asterisk-buch.de Videos of the AMOOCON VoIP conference 2009 -> http://www.amoocon.de --
On Wed, May 20, 2009 at 12:44 AM, Arun Kumar <arunvoip at gmail.com> wrote:> here is my problem: when I call from 6004 to my cme extension 4615, on 4615 > I've configured noans timeout to 15 and then it goes to my unity express > (cue) for voicemail so when I call my cme extension it rings for few seconds > and then on my asterisk cli I see "500 Internal Server Error" back from my > CCM IP and getting standard asterisk message saying "all circuits are busy > now" . as per my understanding it should go to my cue.You need to enable better debugging on the Cisco side. You shouldn't be getting a 500 internal server error. You need to debug the Cisco and find out what it says besides 500 internal server error. There should be logging for an error like that.