similar to: intel 536 EP as x100p clone?

Hi, Sorry for keep hammering the list with this annoying question. Can we use Intel 536 ep (not 537ep that is in wiki) as x100p clone? I know I've asked it in this list a couple days ago but none responded so far and I'm getting frustrated pairing it with asterisk as the zaptel driver could not detect it. I just need more information before I throw this intel 536 EP to the garbage can

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Hi, Does anyone know how to configure speex in asterisk 1.0.10? I've successfully installed it but cannot get any idea how to set the quality, etc.. Thanks Regards, Stevanus

Hi guys, I 've tried asterisk 1.2.2. It work flawlessly for about 3 days then at the third days I activated setting jitterbuffer=yes and suddenly there is no voice when the call is picked up. It's really weird as if asterisk stops sending rtp packet. I've checked asterisk log and found nothing suspicious. Just weird :S. I tried it in 3 asterisk server and all of them are having

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

Hi, I tried to connect cisco 7910 into asterisk system using chan_sccp.so. But I got a major issue : - when I called from 7910 to another sip phone in the same asterisk server, the call took place normally. - when I called from 7910 to another sip phone in different asterisk server, the call is answered but I cannot hear nor say anything. The phone just immediately lose its tone. - when I got

---------- Forwarded message ---------- From: SilverTip257 <silvertip257 at gmail.com> Date: Fri, Mar 15, 2013 at 7:51 PM Subject: Re: [CentOS] atheros wifi on my oqo2 To: Robert Moskowitz <rgm at htt-consult.com> On Fri, Mar 15, 2013 at 5:07 PM, Robert Moskowitz <rgm at htt-consult.com>wrote: > > On 03/14/2013 07:09 PM, SilverTip257 wrote: > >> On Thu, Mar 14,

Hi, anybody know how to fix this. May 20 12:16:15 wolfpac kernel: NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out May 20 12:16:15 wolfpac kernel: Modules linked in: pf_ring(U) af_key iptable_nat ipt_LOG iptable_filter ip_tables nf_conntrack_ipv6 nf_defrag_ipv6 xt_state ip6t_LOG xt_limit ip6table_filter ip6_tables bridge stp llc nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4

To the guy who wanted to know if the Tiger 560 card was a X100P - I don't think so. Here's the lspci -vv from a fairly new X100P: 00:09.0 Communication controller: Tiger Jet Network Inc. Model 300 128k Subsystem: Unknown device 8085:0003 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B-

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Ack! This slipped through my email. I am terribly sorry. Thank you so much for responding. On 04/06/2014 08:43 PM, Ilia Mirkin wrote: > On Sun, Apr 6, 2014 at 7:16 PM, ~Stack~ <i.am.stack at gmail.com> wrote: >> Greetings, [snip] >> My working kernel is: 2.6.32-358.23.2.el6.x86_64 (and anything before). >> >> The problem kernel is: 2.6.32-431.1.2.el6.x86_64 and

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hi, I using asterisk 1.2.4 on a CentOS with Linux 2.6.9-22.0.2.ELsmp kernel. I've two x100p cards connected, only one card is reconigzed by asterisk. 02:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) 02:03.0 Communication controller: Tiger Jet

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem:

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

Hi, I'm trying to passthrough legacy PCI ISDN controller to a KVM based virtual machine: <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00'

Hello list, I'm having a problem with a BRI card, a B200E (PCI-e) card on an Intel server with a riser that I'm guessing is what's making the problem. The output of lspci -vvv is: 07:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem: Cologne Chip Designs GmbH Device e884 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-

I have this cheap "ENCORE 10/100Mbps Fast Ethernet PCI Adapter" which comes with its own driver that compiles to 'sundance.ko' and performs bad (30% packet loss) on a fully updated CentOS 4.4 box. This brand, model and driver have worked OK for me on some other CentOS installations, none of which are 4.4. Short of replacing the board, which you can bet I will do, can anybody