similar to: Siemens Hi-Path help

im really newbie, and i have a siemens digital pbx work in my work. i have 4 outside lines and the pbx has a E1/PRI card. what i need to ask my siemens provider(techinicians) to do in the pbx? i only have in my pbx the 9 to get a line to go outside is very simple. but i dont know what i need to ask them to programming. please help me. -- .- Pablo Allietti LACNIC

I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4 and asterisk 1.4.23 using a Te210P card. the phone guy is saying that the lines are reporting always BUSY. however on my end the status shows OK. Anyone seen this? Is there something different about connecting PRI to siemens hipath? system.conf shows: loadzone=us defaultzone=us span=1,1,6,esf,b8zs bchan=1-5 dchan=24

I am connecting 1.4.22 and dahdi 2.1.0.3+2.1.0.2 to a siemens hipath 300 and siemens hipath 4000. (2 channels to each switch) with a TE210p card setup as T1 with em_w. When the call is initiated to either switch the phone rings, when its answered then nothing... I hear no audio etc... After the timeout period the call is hung up. The phone switch 300 needs the T1 reset as the channel is not

Hello! Is it possible to connect Siemens HiPath 4000 to Asterisk? What equipment required on Siemens side? I mean IP not E1. Sorry for asking here. Siemens-related websites use "salesperson language". There is no technical information.

Hi, I will like to know if anyone would guide me about how I can to interconnect one SIEMENS HiPATH 3700 with Asterisk. HiPATH have VoIP card and my idea is to do one un IP trunk between them so we would to transfer calls and services (voicemail, IVR,..) between both. We havent PRI ports unused in HiPATH so cheapest method of interconnection is one IP trunk. Any help or comment about will be

Hi * :-) I found in the online WiKi docs some information on how to integrate Asterisk with "old PBX"... http://www.voip-info.org/wiki-Asterisk+legacy+integration ...but I couldn't find anything on integration with a Siemens HiCom 150E. Later on we'll migrate to a HiPath 3750 so information covering this model would be nice too... Do you know if any of the PBX listed

Hello all, I am trying to connect asterisk to a Siemens Hipath 3750 PBX system. I have a physical connection issue. I know that I should use a crossover RJ48 cable to link the two systems. The problem however is that the physical interface of the Siemens system is very unfamiliar. From my digging around, I think that this is an S2M interface. http://www.mail-archive.com/asterisk-users at

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Hi all, I want to use asteriks with my siemens hipath 1120 hardware. Is it possible? Thanks -- /** * @AUTHOR At?f CEYLAN * Software Developer & System Admin * http://www.atifceylan.com */ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101125/a5b9e9f6/attachment.htm

Hi all, I have a connect between a siemens hipath & Asterisk system over PRI The connection works perfectly I can call from the Hipath to an Asterisk Extension. I want to allow the hipath extensions to dial out over a SIP trunk on asterisk but I keep getting "The number you have dialed is not in service" In this CLI I'm dialing from hipath extension 9 (prefix for sip trunk)

Hello all, I'm new to asterisk. Our company wants to setup an asterisk server and will eventually move to IP centric phones, but they don't want to just throw away the old Siemens PBX, so during the process we want to integrate it with asterisk. Is it possible? and how? thanks. Lito -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi all, we do have some troubles with zaptel timing source - we have a setup with 3 telco PRI lines, connected to asterisk digium card 0 - asterisk does some handling - calls are leaving on digium card 1 - going to a siemens hipath - there is some call handling - some of the calls then are going from the hipath over a qsig line to a bosch integral PBX - handling the rest of the calls. To be able

My new company is going to enter a bid competing with 3Com and Siemens solutions from others. Voice service is a PRI T-1 with a block of 100 DID numbers, a second T1 that will carry Integrated voice/data, 12 voice/768K for redundency. I asked this a week or two ago, now I have more details. Best/$ channel banks that work with Asterisk and Best deal on phones... 16 business, 34 basic IP

Hello, if somebody using this scenario in production successfully, please send me info, which ISDN card for asterisk server is usefull for me (Digium, Sangoma)? my crucial requirement is "caller id name" transfer/display between ISDN (Siemens PBX) and IP phone connected to asterisk I'm using PRI interface and Q.SIG signaling. thank you PJ

Hi Stephen, You said that PRI works great. We are using HiPath 3550 and Siemens digital phone which using *11, *97 etc for function keys. However Asterisk uses the the * key plus one or two digits for function keys as well(it is common key combination for functions). So is it any way to disable *11, *97 keys in HiPath system and pass this keys to Asterisk? Thanks and regards, Isaac >Hi

hi all i have a TE110P connected to my PBX when i try to call a extension number in other location 3525 the asterisk give me a error -- User entered '3525' -- Executing [450 at lacnicuy:4] GotoIf("Zap/31-1", "0?6:5") in new stack -- Goto (lacnicuy,450,5) -- Executing [450 at lacnicuy:5] Dial("Zap/31-1", "IAX2/lacnic:splacnic at

Hi, I am currently using asterisk to record all incoming calls. My setup is as follows, the asterisk server has a two TE120P cards one of which sends/receives calls from the carrier and the other is connected to a Siemens HiPath 3000. All calls that come into asterisk use MixMonitor to record calls and this works fine, but if a call gets transferred the transfer information is not sent back to my

Hi Group, I am currently facing a dead end and any help will be much appreciated. I have an a104d installed in an asterisk box, two of which is configured on ISDN pri. One is facing pstn and the other one is facing a hipath 300e Siemens. I am getting one way audio when a local on the hipath tries to make a pstn call but no issue on incoming calls from pstn going to the hipath locals. local

Hi, I am investigating possibility of using asterisk as an call center controller, i.e. Clients phone in, interact with IVR, if IVR is not enough get redirected to human consultant. There should be possibility for supervisors to connect to ongoing conversation. Expected traffic will not exceed 30 concurrent calls. Asterisk box should be connected to Siemens "communication platform"