similar to: Snom 360 hold problem

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Does anybody know if there is an app that will cause similar to occur on users PC? I have a scenario where users will have snom phones on their desks. Ideally when their phone receives a call I need to popup a web browser with a specific url. Any ideas appreciated. Neil on 5/7/05 10:52 PM, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> wrote:

Hi everyone, Ive just installed a bunch of Snom 360s, and now having a NIGHTMARE of problems! Ive got a receponist phone with a extra sidecar on it. And when she gets 2+ calls and puts them on hold, when she goes to transfer them out the calls on hold get merged together. Somehow the calls on hold get merged and not to the extension needed!! Any help on this would be great guys, that would be

I am just playing with a SNOM 190. Overall, I'm very impressed with the quality of the unit and the feature set. I am running the latest firmware (snom190-SIP 3.57u) and the asterisk CVS from last night (1/3/05). The only problem that I've encountered so far is with Call Forwarding, which doesn't work at all. The Snom phone is sending a "486 - Busy Here" back to *, which

Snom 200 has be set up with extended key pad. The product literature also mention multiple sip registration. How many registration can it handle? It does not seem to appear in the user manual. David Kwok

I have the dtmfmode in sip.conf set to use rfc 2833 however, when my users have to enter pin numbers to join let say someone's conference bridge the pin is received twice. Any ideas on how to solve this? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050120/56ff46fa/attachment.htm

Anyone have a Snom they're happy with? How did you manage that? :) I have a system of: Asterisk 1.2.3 2 Wildcard TDM400P Rev I and E/F 1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841 ~15 Grandstream 101 Everything (currently) is on the same network, not a router to be seen between any two. Also everything, except the snom, is working sweetly. The main problem is ECHO.. awful echo and

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

I wanted to post this to everyone in case someone else ran into this problem! Firmware 6.5.1 (Current stable release) Asterisk 1.2.13 Call Completion: Off Peer to Perr call completion: On (canreinvite=no is set in sip.conf for each friend) Call join on Xfer (2 calls): Off Those settings seem to do the trick, I tested on Snom 320s with no errors at all, Im going to test on the 360s later today,

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.

> I have seen a few posts that state that the hold and transfer features > on the SNOM and Cisco phones do not work in themselves and that, > instead, configuring the # key is the way to get transfers to work. > Can somebody please give me an indication as to why this is and what > needs to be done, either within the code or on the phone, to make this > functionality work as it

Hi i have a friend who i setup an asterisk system for at his doctors office. it has 3 snom 360 phones with 6.2.x stable firmware and latest asterisk 1.4 and zaptel. They have the digium 4 port fxo card. They are extremely upset because calls are being randomly bridged for no rhyme or reason. They say that callers will call in and sometimes get connected with other callers, or they will be in

that is *very* cool. However, I am somewhat concerned about being forced to license the firmware (even if it is free) can you comment for the list the rationale behind forcing a license and how this might affect Snom users who, say, want to DOWN grade their firmware? ps is there a timetable for supported, formally released firmware version? -----Original Message----- From: Hirosh Dabui

Under Advanced make sure this is set: Call join on Xfer (2 calls): to off ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tommaso Calosi Sent: Thursday, May 04, 2006 4:02 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Unwanted conference with snom320 and asterisk

Hi, Snom phones firmware 5.0 is now out. Try it if you like: http://www.snom.com/wiki/index.php/Main_Page. Regards, --------------------------------------------------------------------- Usman Tahir snom technology AG www.snom.com --------------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've tried to use SIPSAK to understand the troubles i'm having about sending my voice to the person I've called (extension), after doing this tests below I always got this error "error: this FQDN or IP is not valid: voicegw". This could cause problems (namely audio problems)? Best regards, Helder voicegw:~# sipsak -C empty -a password -s

-----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 Dear user, the new snom 360 is able to use services from standard web servers. Users can deploy customized client services with snom 360 and interact with other users via the keypad. The snom 360 will use HTTP protocol from standard web servers, like Apache. Typical services are: ~ 1. To-do lists ~ 2. Stock Information ~ 3. Weather ~ 4.

Dear friends, I am working around with a Snom 360 and Asterisk 1.4 + FreePBX In order to get subscriptions working and the Snom 360 lights turns on, I have set everything just like all the pages in the net explain. So, I get subsciption working. I can list subscription on the asterisk and if I use the SIP trace function built in at the SNOM nad see NOTIFY messages and 200 OK responses.