similar to: bridging sip to capi, no playtones back to caller

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I try to get callers forwarded to by mobile phone when they dial a certain digit. In my extensions.conf I have defined the following: [279xxxx] exten => s,1,SetLanguage(de) exten => s,2,Wait,5 exten => s,3,BackGround(demo-congrats) exten => s,4,Goto(boksa,#,1) exten => 3,1,VoiceMail,u1 exten => 4,1,VoicemailMain exten =>

Hi, I?ve strange problem when I?m making a call from SIP (Cisco 7960) to capi (Fritz PCI). When I call a national number, I?m hearing the ringtone when the called party is ringing but when I call an international number, I don?t hear the ringtone and I?ve a silence until the called party answers. Both call are going through the same extension. Here?s 2 log files, one with a national number and

Hi all, does anyone have capiECT working? I can't get it to work - please see my logfiles below. While using an * CVS version of late September and chan_capi-0.2.5 (I guess), it worked!!! (I know, never change a running system ... should've backuped ... etc.) Here's the setup: NT----AgfeoISDNPBX----AgfeoISDNPBX----AnalogPhones in between the two PBX I attached my * server with a

Hi, I've got Asterisk configured and working (sort of) with an Eicon Diva Server 2M ISDN card (connected to S0 bus of another PBX). This * box is on a 'live', non-nat IP address. I also have a couple of budgetone phones, one behind NAT and one not. When I place an outgoing call, I get the following messages: -- Executing Dial("SIP/filbert-9876", "CAPI/288:333") in

Hi all, * was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a Today chan_capi stopped working, without any changings at the system. It seems, that not * is the reason, because isdn-log also shows no calls. If I try to call * from outside via capi, I only get a busy. That is the try from inside to outside: stern01*CLI> -- data = @89930:0107901723168212 -- capi

Hello, I am trying to configure asterisk 1.0.7pre to get incoming calls from an ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is that the context is not recognised in the /etc/asterisk/capi.conf I have in /etc/asterisk/capi.conf 's section "[interfaces]" the following directive context=isdn and the following directive in /etc/asterisk/extensions.conf in

Hi, whenever I include a "Ringing" Line in some Voicemail Extension I get an error when a call from the outside (via ISDN) comes in, but it works when an internal (SIP-phone) calls the extension. Here is my configuration for testing: ------------extensions.conf------------ [isdnext] ; strep external "101", our number and leave only extension exten =>

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

Hi, i use chan_capi 0.3.1 with asterisk (stable branch cvs) and 3 x c4 active ISDN card. From Controller 1 - 7 there are no problems making calls between asterisk and the pstn. But when i make calls from controller 8 - 12 i get on every controller (8 - 12) a segmentation fault in asterisk :( I tried different linux distributions (gentoo 2004.1, redhat 9.0 , suse 9.1) but same error.

Hi, I installed Asterisk with CAPI support. Everything works fine while starting Asterisk, but when a call comes in Asterisk hangsup the call after two times of ringing. The output is like: Jun 24 22:19:49 NOTICE[1082178480]: chan_capi.c:1931 capi_handle_msg: CONNECT_IND ID=002 #0x011d LEN=0048 Controller/PLCI/NCCI = 0x101 CIPValue = 0x10

Hi, I am having trouble configuring CAPI so that call transfers work. I make a SIP call to asterisk which goes out on ISDn via CAPI. Then I try to do a transfer from the SIP phone which doesn't work and results in the call being disconnected. The error message given by asterisk is that it chan_capi can't find an entry for the outgoing msn for the transfer however the outgoing msn is the

Hello, I did this post a long time ago but never solved the problem, so i'm trying again after something like 10 months, hopefully i'll find someone that found a solution ;-) When i call an external number that sends audio before call has been answered (like some PBX of public offices do here in italy), strange things happen: I'm using chan_capi, with Early B3 active, i can listen

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

Hello List, because this is my first post to this list, i'd like to introduce myself. My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in germany. Okay, now to the reason for this posting: I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686) with AVM ISDN Fritz PCI card (passive). I followed the configuration on http://voip-info.org and the

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

Hi, although setting up voicemail for busy and unavailable should be easy, things aren't working the way they should in my configuration (asterisk 1.2.14 bristuffed): Here's the relevant part of the extensions.conf: exten => 56830976,1,Answer() exten => 56830976,2,Dial(SIP/hbaumgart,20,tr) exten => 56830976,3,VoiceMail,u76 exten => 56830976,4,Hangup exten =>

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

hi, I've been running a pure sip asterisk box for a while now with no problems, and i've recently added an isdn2e line from bt in the uk. everything is hooked up and i've got it ringing my sip extensions, but the logs don't quite look perfect and i can't see any description of what i should consider to be normal behaviour. would someone be able to look this over and tell me

Hi, after having read so much about Asterisk, I went on and tried out to create a little sample-setup. I'm using a Fritz Card USB with the AVM Capi Driver and two X-Lite Softphones. Dialing between the softphones makes no problem. Calling the MSN fron an external phone also works. I'm getting to the asterisk demo-voicebox which works flawlessly. Now may next step has been to enable

Hello, I tryed out spandsp with libtiff-3.5.7 and with Asterisk from CVS. I tryed to receive a fax on a CAPI channel. Finally I got a file with 8 byte length (/tmp/testfax.tif). How can I do next? Thanks in advance, Thomas ps: what are hardware requirements for sending/receiving faxes? -- creating pipe for PLCI=0x101 msn = 2258589 > sent ALERT_REQ PLCI = 0x101 --