gw@adcomcorp.com
2006-Jan-26 23:42 UTC
[Asterisk-Users] Chan_capi on builds 7955>8320 strangeness
Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I updated to chan-capi_cm 0.6.3 but there is no change. Noticed this when trying to update for the timebomb bug. I think it is somehow related to the dial command but I'm not certain. Has anyone else experienced such oddness? Regards, Greg
Armin Schindler
2006-Jan-27 00:23 UTC
[Asterisk-Users] Chan_capi on builds 7955>8320 strangeness
On Fri, 27 Jan 2006 gw@adcomcorp.com wrote:> Hello All, > I am having an odd problem with Armin's chan-capi_cm on builds higher > than 7955. > > It would seem that this happens on anything higher than 7955. > > What is happening is the isdn is ringing, then asterisk does a goto-if > and just hangs. > > Asterisk itself is ok, but the isdn then rings out or busys out on the > other side. > > Outgoing works fine, this only seems to effect incoming. > > I updated to chan-capi_cm 0.6.3 but there is no change. > > Noticed this when trying to update for the timebomb bug. > > I think it is somehow related to the dial command but I'm not certain. > > Has anyone else experienced such oddness?Can you please create a log (set verbose 5, capi debug)? Armin
gw@adcomcorp.com
2006-Jan-27 01:21 UTC
[Asterisk-Users] Chan_capi on builds 7955>8320 strangeness
/etc/init.d/asterisk stop Stopping Asterisk PBX: . censys:/usr/src/asterisk-8632# cd .. censys:/usr/src# asterisk -vvvvvc == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing '/etc/asterisk/extconfig.conf': Found Asterisk SVN-trunk-r8620, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'show license' for details. ======================================================================= == Parsing '/etc/asterisk/logger.conf': Found Asterisk Event Logger Started /var/log/asterisk/event_log Asterisk Dynamic Loader loading preload modules:>>>>CLIP[chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found == This box has 1 capi controller(s). -- CAPI/contr1 supports DTMF -- CAPI/contr1 supports echo cancellation -- CAPI/contr1 supports line interconnect -- CAPI/contr1 supports supplementary services > supplementary services : 0x0000010f > HOLD/RETRIEVE > TERMINAL PORTABILITY > ECT > 3PTY > MWI == Reading config for ISDNL1 -- capi_pvt ISDNL1-pseudo-D (5912211,capi-in-5912211,0,2) (1,4,64) -- capi_pvt ISDNL1 (5912211,capi-in-5912211,0,2) (1,4,64) -- capi_pvt ISDNL1 (5912211,capi-in-5912211,0,2) (1,4,64) == Reading config for ISDNL2 -- capi_pvt ISDNL2-pseudo-D (6930821,capi-in-6930821,0,2) (0,0,64) -- capi_pvt ISDNL2 (6930821,capi-in-6930821,0,2) (0,0,64) -- capi_pvt ISDNL2 (6930821,capi-in-6930821,0,2) (0,0,64) -- listening on contr1 CIPmask = 0x1fff03ff == Registered channel type 'CAPI' (Common ISDN API Driver (cm-0.6.3) ) == Registered application 'capiCommand' == Registered custom function VANITYNUMBER>>>>CLIPAsterisk Ready. *CLI> capi debug CAPI Debugging Enabled *CLI> -- Saved useragent "PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067" for peer 364 -- Executing Set("SIP/366-11b2", "CALLFILENAME=/var/spool/asterisk/monitor/outgoing/9145912211/Out-200601 18-030458-9145912211_ADCOM Office_19145912211") in new stack -- Executing SetCallerID("SIP/366-11b2", "9145912211") in new stack -- Executing Monitor("SIP/366-11b2", "wav|/var/spool/asterisk/monitor/outgoing/9145912211/Out-20060118-030458 -9145912211_ADCOM Office_19145912211") in new stack -- Executing Dial("SIP/366-11b2", "IAX2/llllllllll/19145912211") in new stack -- Called llllllllll/19145912211 -- Call accepted by 208.139.204.232 (format ulaw) -- Format for call is ulaw -- IAX2/teliaxcsi-8 is making progress passing it to SIP/366-11b2 -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm Callctrl/1.5 MxSF/v3.2.6.26" for peer 347 -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm Callctrl/1.5 MxSF/v3.2.6.26" for peer 345 -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm Callctrl/1.5 MxSF/v3.2.6.26" for peer 361 -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm Callctrl/1.5 MxSF/v3.2.6.26" for peer 363 -- Hungup 'IAX2/teliaxcsi-8' == Spawn extension (cisco-teliaxoutcsi, 19145912211, 4) exited non-zero on 'SIP/366-11b2' -- Saved useragent "PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067" for peer 365 -- Saved useragent "PolycomSoundPointIP-SPIP_600-UA/1.6.3.0067" for peer 330 -- Executing Set("SIP/366-5e8d", "CALLFILENAME=/var/spool/asterisk/monitor/outgoing/9145912211/Out-200601 18-030510-9145912211_ADCOM Office_19145912211") in new stack -- Executing SetCallerID("SIP/366-5e8d", "9145912211") in new stack -- Executing Monitor("SIP/366-5e8d", "wav|/var/spool/asterisk/monitor/outgoing/9145912211/Out-20060118-030510 -9145912211_ADCOM Office_19145912211") in new stack -- Executing Dial("SIP/366-5e8d", "IAX2/censys@teliaxcsi/19145912211") in new stack -- Called censys@teliaxcsi/19145912211 -- Call accepted by 208.139.204.232 (format ulaw) -- Format for call is ulaw Jan 17 22:05:11 WARNING[8571]: chan_iax2.c:7525 socket_read: Received mini frame before first full voice frame -- IAX2/teliaxcsi-9 is making progress passing it to SIP/366-5e8d CONNECT_IND ID=001 #0x0001 LEN=0050 Controller/PLCI/NCCI = 0x201 CIPValue = 0x1 CalledPartyNumber = <c1>5912211 CallingPartyNumber = <21 81>9145912211 CalledPartySubaddress = default CallingPartySubaddress = default BC = <80 90 a2> LLC = default HLC = default AdditionalInfo BChannelinformation = default Keypadfacility = default Useruserdata = default Facilitydataarray = default -- CONNECT_IND (PLCI=0x201,DID=5912211,CID=9145912211,CIP=0x1,CONTROLLER=0x1) > ISDNL2: msn='6930821' DNID='5912211' MSN > ISDNL2: msn='6930821' DNID='5912211' MSN > ISDNL1: msn='5912211' DNID='5912211' MSN == ISDNL1: Incoming call '19145912211' -> '5912211' INFO_IND ID=001 #0x0002 LEN=0023 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x70 InfoElement = <c1>5912211 INFO_RESP ID=001 #0x0002 LEN=0012 Controller/PLCI/NCCI = 0x201 -- ISDNL1: info element CALLED PARTY NUMBER > ISDNL1: INFO_IND DID digits not used in this state. INFO_IND ID=001 #0x0003 LEN=0025 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x28 InfoElement = 9145912211 INFO_RESP ID=001 #0x0003 LEN=0012 Controller/PLCI/NCCI = 0x201 -- ISDNL1: info element DSP INFO_IND ID=001 #0x0004 LEN=0016 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x18 InfoElement = <89> INFO_RESP ID=001 #0x0004 LEN=0012 Controller/PLCI/NCCI = 0x201 -- ISDNL1: info element CHANNEL IDENTIFICATION 89 INFO_IND ID=001 #0x0005 LEN=0015 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x8005 InfoElement = default INFO_RESP ID=001 #0x0005 LEN=0012 Controller/PLCI/NCCI = 0x201 -- ISDNL1: info element SETUP -- ISDNL1: CAPI/ISDNL1/5912211-0: 5912211 matches in context capi-in-5912211 -- Executing Set("CAPI/ISDNL1/5912211-0", "IncomingCID="" <19145912211>") in new stack -- Executing Set("CAPI/ISDNL1/5912211-0", "IncomingLine=9145912211") in new stack -- Executing Set("CAPI/ISDNL1/5912211-0", "CALLERID(name)=IN 2211") in new stack -- Executing GotoIf("CAPI/ISDNL1/5912211-0", "1?5:6") in new stack -- Goto (capi-in-5912211,5912211,5) -- Executing Set("CAPI/ISDNL1/5912211-0", "CALLERID(num)=9145912211") in new stack -- Executing GotoIf("CAPI/ISDNL1/5912211-0", "1?16") in new stack -- Goto (capi-in-5912211,5912211,16) -- Executing Goto("CAPI/ISDNL1/5912211-0", "adcomincoming|s|1") in new stack -- Goto (adcomincoming,s,1) -- Executing LookupCIDName("CAPI/ISDNL1/5912211-0", "") in new stack -- Changed Caller*ID name to ADCOM Ardlsey -- Executing Set("CAPI/ISDNL1/5912211-0", "CALLFILENAME=/var/spool/asterisk/monitor/incoming/9145912211/In-2006011 8-030511-9145912211_ADCOM Ardlsey_s") in new stack == Started pbx on channel CAPI/ISDNL1/5912211-0 > CAPI devicestate requested for ISDNL1/5912211 -- Executing Monitor("CAPI/ISDNL1/5912211-0", "wav|/var/spool/asterisk/monitor/incoming/9145912211/In-20060118-030511- 9145912211_ADCOM Ardlsey_s") in new stack -- Executing GotoIf("CAPI/ISDNL1/5912211-0", "0?9:5") in new stack -- Goto (adcomincoming,s,5) -- Executing GotoIfTime("CAPI/ISDNL1/5912211-0", "20:01-7:59|mon-sun|*|*?9") in new stack -- IAX2/teliaxcsi-9 is ringing INFO_IND ID=001 #0x0006 LEN=0015 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x804d InfoElement = default INFO_RESP ID=001 #0x0006 LEN=0012 Controller/PLCI/NCCI = 0x201 -- ISDNL1: info element RELEASE DISCONNECT_IND ID=001 #0x0007 LEN=0014 Controller/PLCI/NCCI = 0x201 Reason = 0x3490 DISCONNECT_RESP ID=001 #0x0007 LEN=0012 Controller/PLCI/NCCI = 0x201 > CAPI INFO 0x3490: Normal call clearing -- Hungup 'IAX2/teliaxcsi-9' == Spawn extension (cisco-teliaxoutcsi, 19145912211, 4) exited non-zero on 'SIP/366-5e8d' -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Armin Schindler Sent: Friday, January 27, 2006 2:24 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Chan_capi on builds 7955>8320 strangeness On Fri, 27 Jan 2006 gw@adcomcorp.com wrote:> Hello All, > I am having an odd problem with Armin's chan-capi_cm on builds higher > than 7955. > > It would seem that this happens on anything higher than 7955. > > What is happening is the isdn is ringing, then asterisk does a goto-if> and just hangs. > > Asterisk itself is ok, but the isdn then rings out or busys out on the> other side. > > Outgoing works fine, this only seems to effect incoming. > > I updated to chan-capi_cm 0.6.3 but there is no change. > > Noticed this when trying to update for the timebomb bug. > > I think it is somehow related to the dial command but I'm not certain. > > Has anyone else experienced such oddness?Can you please create a log (set verbose 5, capi debug)? Armin _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
gw@adcomcorp.com
2006-Jan-27 16:05 UTC
[Asterisk-Users] Chan_capi on builds 7955>8320 strangeness
Strange though it's only effecting since build 8000...
Here's the snippet:
exten => s,1,LookupCIDName
exten =>
s,2,Set(CALLFILENAME=/var/spool/asterisk/monitor/incoming/${IncomingLine
}/In-${STRFTIME(${EPOCH},,%Y%m% . . .
exten => s,3,Monitor(wav,${CALLFILENAME})
exten => s,4,GotoIf($["${INCOMINGLINE}" =
"9146930821"]?9:5);
exten => s,5,GotoIfTime(20:01-7:59|mon-sun|*|*?9)
exten => s,6,Dial(${ADCOMDAYRINGTO},25,t);All
exten => s,7,NoOp(${DIALSTATUS})
exten => s,8,Goto(adcomincoming,s,11)
exten => s,9,Dial(${ADCOMNIGHTRINGTO},25,t);Cisco,Ping,Poly,SPA841
exten => s,10,NoOp(${DIALSTATUS})
exten => s,107,Answer
exten => s,108,Wait(1)
exten => s,109,BackGround(adcom1/thankyou); Thank you for calling ADCOM
Corp.
exten => s,110,Playback(busy-pls-hold)
exten => s,111,Queue(adcomgwqueue)
exten => s,11,Answer ; Answer the line
exten => s,12,Wait(1)
... Menu plays.
ADCOMDAYRINGTO
${C79601L1}&${OFFICE3}&${POLY1L1}&SIP/344&SIP/345&SIP/364&${SOMERSADCOM}
; SIP/355&SIP/342 SP
ADCOMNIGHTRINGTO
${C79601L1}&${POLY1L1}&SIP/344&SIP/345&SIP/364&${SOMERSADCOM}
So could it have something to do with the dialstring? I would think
asterisk would say something first before doing the dials.
I'll try it later with a simple dialstring. I'm going to rebuild it
anyhow.
I am looking to use a global variable in like a switch setup, to direct
calls to particular setups based on a menu. For example, someone dials
ext 333, and they get a menu for day mode, night mode, holiday, away
from office, etc and the dialplan will ring different devices depending
on the choice...
We'll see what happens...
On a side note, I believe it works if I dial right into the menu
playback. But if it's the dialstring that's wrong, I would think
asterisk should complain about it.
Greg
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Armin
Schindler
Sent: Friday, January 27, 2006 4:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Chan_capi on builds 7955>8320 strangeness
This is not a problem of the ISDN line (or chan_capi), Asterisk is just
not doing anything after
-- Executing
GotoIfTime("CAPI/ISDNL1/5912211-0","20:01-7:59|mon-sun|*|*?9")
in new
stack
and without further commands (like Ringing(), Answer(), ...) the ISDN
line timed out and disconnects.
So either your dialplan is buggy, or Asterisk is not doing what you
want.
What should be done according your extensions.conf in that state ?
Armin
On Fri, 27 Jan 2006 gw@adcomcorp.com wrote:> /etc/init.d/asterisk stop
> Stopping Asterisk PBX: .
> censys:/usr/src/asterisk-8632# cd ..
> censys:/usr/src# asterisk -vvvvvc
>
> == Parsing '/etc/asterisk/asterisk.conf': Found
>
> == Parsing '/etc/asterisk/extconfig.conf': Found
>
> Asterisk SVN-trunk-r8620, Copyright (C) 1999 - 2006 Digium, Inc. and
> others.
>
> Created by Mark Spencer <markster@digium.com>
>
> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'
for
> details.
>
> This is free software, with components licensed under the GNU General
> Public
>
> License version 2 and other licenses; you are welcome to redistribute
> it under
>
> certain conditions. Type 'show license' for details.
>
> =====================================================================>
=> >
> == Parsing '/etc/asterisk/logger.conf': Found
>
> Asterisk Event Logger Started /var/log/asterisk/event_log
>
> Asterisk Dynamic Loader loading preload modules:
>
> >>>>CLIP
> [chan_capi.so] => (Common ISDN API for Asterisk)
>
> == Parsing '/etc/asterisk/capi.conf': Found
>
> == This box has 1 capi controller(s).
>
> -- CAPI/contr1 supports DTMF
>
> -- CAPI/contr1 supports echo cancellation
>
> -- CAPI/contr1 supports line interconnect
>
> -- CAPI/contr1 supports supplementary services
>
> > supplementary services : 0x0000010f
>
> > HOLD/RETRIEVE
>
> > TERMINAL PORTABILITY
>
> > ECT
>
> > 3PTY
>
> > MWI
>
> == Reading config for ISDNL1
>
> -- capi_pvt ISDNL1-pseudo-D (5912211,capi-in-5912211,0,2) (1,4,64)
>
> -- capi_pvt ISDNL1 (5912211,capi-in-5912211,0,2) (1,4,64)
>
> -- capi_pvt ISDNL1 (5912211,capi-in-5912211,0,2) (1,4,64)
>
> == Reading config for ISDNL2
>
> -- capi_pvt ISDNL2-pseudo-D (6930821,capi-in-6930821,0,2) (0,0,64)
>
> -- capi_pvt ISDNL2 (6930821,capi-in-6930821,0,2) (0,0,64)
>
> -- capi_pvt ISDNL2 (6930821,capi-in-6930821,0,2) (0,0,64)
>
> -- listening on contr1 CIPmask = 0x1fff03ff
>
> == Registered channel type 'CAPI' (Common ISDN API Driver
(cm-0.6.3)
> )
>
> == Registered application 'capiCommand'
>
> == Registered custom function VANITYNUMBER
>
> >>>>CLIP
>
> Asterisk Ready.
> *CLI> capi debug CAPI Debugging Enabled
> *CLI> -- Saved useragent
> "PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067" for peer 364
>
> -- Executing Set("SIP/366-11b2",
> "CALLFILENAME=/var/spool/asterisk/monitor/outgoing/9145912211/Out-2006
> 01 18-030458-9145912211_ADCOM Office_19145912211") in new stack
>
> -- Executing SetCallerID("SIP/366-11b2",
"9145912211") in new
> stack
>
> -- Executing Monitor("SIP/366-11b2",
> "wav|/var/spool/asterisk/monitor/outgoing/9145912211/Out-20060118-0304
> 58 -9145912211_ADCOM Office_19145912211") in new stack
>
> -- Executing Dial("SIP/366-11b2",
"IAX2/llllllllll/19145912211")
> in new stack
>
> -- Called llllllllll/19145912211
>
> -- Call accepted by 208.139.204.232 (format ulaw)
>
> -- Format for call is ulaw
>
> -- IAX2/teliaxcsi-8 is making progress passing it to SIP/366-11b2
>
> -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm
> Callctrl/1.5 MxSF/v3.2.6.26" for peer 347
>
> -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm
> Callctrl/1.5 MxSF/v3.2.6.26" for peer 345
>
> -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm
> Callctrl/1.5 MxSF/v3.2.6.26" for peer 361
>
> -- Saved useragent "Aastra 480i Cordless/1.3.0.1080 Brcm
> Callctrl/1.5 MxSF/v3.2.6.26" for peer 363
>
> -- Hungup 'IAX2/teliaxcsi-8'
>
> == Spawn extension (cisco-teliaxoutcsi, 19145912211, 4) exited
> non-zero on 'SIP/366-11b2'
>
> -- Saved useragent
"PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067"
> for peer 365
>
> -- Saved useragent
"PolycomSoundPointIP-SPIP_600-UA/1.6.3.0067"
> for peer 330
>
> -- Executing Set("SIP/366-5e8d",
> "CALLFILENAME=/var/spool/asterisk/monitor/outgoing/9145912211/Out-2006
> 01 18-030510-9145912211_ADCOM Office_19145912211") in new stack
>
> -- Executing SetCallerID("SIP/366-5e8d",
"9145912211") in new
> stack
>
> -- Executing Monitor("SIP/366-5e8d",
> "wav|/var/spool/asterisk/monitor/outgoing/9145912211/Out-20060118-0305
> 10 -9145912211_ADCOM Office_19145912211") in new stack
>
> -- Executing Dial("SIP/366-5e8d",
> "IAX2/censys@teliaxcsi/19145912211") in new stack
>
> -- Called censys@teliaxcsi/19145912211
>
> -- Call accepted by 208.139.204.232 (format ulaw)
>
> -- Format for call is ulaw
> Jan 17 22:05:11 WARNING[8571]: chan_iax2.c:7525 socket_read: Received
> mini frame before first full voice frame
>
> -- IAX2/teliaxcsi-9 is making progress passing it to SIP/366-5e8d
>
> CONNECT_IND ID=001 #0x0001 LEN=0050
> Controller/PLCI/NCCI = 0x201
> CIPValue = 0x1
> CalledPartyNumber = <c1>5912211
> CallingPartyNumber = <21 81>9145912211
> CalledPartySubaddress = default
> CallingPartySubaddress = default
> BC = <80 90 a2>
> LLC = default
> HLC = default
> AdditionalInfo
> BChannelinformation = default
> Keypadfacility = default
> Useruserdata = default
> Facilitydataarray = default
>
>
> -- CONNECT_IND
> (PLCI=0x201,DID=5912211,CID=9145912211,CIP=0x1,CONTROLLER=0x1)
>
> > ISDNL2: msn='6930821' DNID='5912211' MSN
>
> > ISDNL2: msn='6930821' DNID='5912211' MSN
>
> > ISDNL1: msn='5912211' DNID='5912211' MSN
>
> == ISDNL1: Incoming call '19145912211' -> '5912211'
>
> INFO_IND ID=001 #0x0002 LEN=0023
> Controller/PLCI/NCCI = 0x201
> InfoNumber = 0x70
> InfoElement = <c1>5912211
>
>
> INFO_RESP ID=001 #0x0002 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> -- ISDNL1: info element CALLED PARTY NUMBER
>
> > ISDNL1: INFO_IND DID digits not used in this state.
>
> INFO_IND ID=001 #0x0003 LEN=0025
> Controller/PLCI/NCCI = 0x201
> InfoNumber = 0x28
> InfoElement = 9145912211
>
>
> INFO_RESP ID=001 #0x0003 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> -- ISDNL1: info element DSP
>
> INFO_IND ID=001 #0x0004 LEN=0016
> Controller/PLCI/NCCI = 0x201
> InfoNumber = 0x18
> InfoElement = <89>
>
>
> INFO_RESP ID=001 #0x0004 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> -- ISDNL1: info element CHANNEL IDENTIFICATION 89
>
> INFO_IND ID=001 #0x0005 LEN=0015
> Controller/PLCI/NCCI = 0x201
> InfoNumber = 0x8005
> InfoElement = default
>
>
> INFO_RESP ID=001 #0x0005 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> -- ISDNL1: info element SETUP
>
> -- ISDNL1: CAPI/ISDNL1/5912211-0: 5912211 matches in context
> capi-in-5912211
>
> -- Executing Set("CAPI/ISDNL1/5912211-0",
"IncomingCID=""
> <19145912211>") in new stack
>
> -- Executing Set("CAPI/ISDNL1/5912211-0",
> "IncomingLine=9145912211") in new stack
>
> -- Executing Set("CAPI/ISDNL1/5912211-0",
"CALLERID(name)=IN
> 2211") in new stack
>
> -- Executing GotoIf("CAPI/ISDNL1/5912211-0",
"1?5:6") in new stack
>
> -- Goto (capi-in-5912211,5912211,5)
>
> -- Executing Set("CAPI/ISDNL1/5912211-0",
> "CALLERID(num)=9145912211") in new stack
>
> -- Executing GotoIf("CAPI/ISDNL1/5912211-0",
"1?16") in new stack
>
> -- Goto (capi-in-5912211,5912211,16)
>
> -- Executing Goto("CAPI/ISDNL1/5912211-0",
"adcomincoming|s|1") in
> new stack
>
> -- Goto (adcomincoming,s,1)
>
> -- Executing LookupCIDName("CAPI/ISDNL1/5912211-0",
"") in new
> stack
>
> -- Changed Caller*ID name to ADCOM Ardlsey
>
> -- Executing Set("CAPI/ISDNL1/5912211-0",
> "CALLFILENAME=/var/spool/asterisk/monitor/incoming/9145912211/In-20060
> 11 8-030511-9145912211_ADCOM Ardlsey_s") in new stack
>
> == Started pbx on channel CAPI/ISDNL1/5912211-0
>
> > CAPI devicestate requested for ISDNL1/5912211
>
> -- Executing Monitor("CAPI/ISDNL1/5912211-0",
> "wav|/var/spool/asterisk/monitor/incoming/9145912211/In-20060118-03051
> 1- 9145912211_ADCOM Ardlsey_s") in new stack
>
> -- Executing GotoIf("CAPI/ISDNL1/5912211-0",
"0?9:5") in new stack
>
> -- Goto (adcomincoming,s,5)
>
> -- Executing GotoIfTime("CAPI/ISDNL1/5912211-0",
> "20:01-7:59|mon-sun|*|*?9") in new stack
>
> -- IAX2/teliaxcsi-9 is ringing
>
> INFO_IND ID=001 #0x0006 LEN=0015
> Controller/PLCI/NCCI = 0x201
> InfoNumber = 0x804d
> InfoElement = default
>
>
> INFO_RESP ID=001 #0x0006 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> -- ISDNL1: info element RELEASE
>
> DISCONNECT_IND ID=001 #0x0007 LEN=0014
> Controller/PLCI/NCCI = 0x201
> Reason = 0x3490
>
>
> DISCONNECT_RESP ID=001 #0x0007 LEN=0012
> Controller/PLCI/NCCI = 0x201
>
>
> > CAPI INFO 0x3490: Normal call clearing
>
> -- Hungup 'IAX2/teliaxcsi-9'
>
> == Spawn extension (cisco-teliaxoutcsi, 19145912211, 4) exited
> non-zero on 'SIP/366-5e8d'
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Armin
> Schindler
> Sent: Friday, January 27, 2006 2:24 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Chan_capi on builds 7955>8320
> strangeness
>
> On Fri, 27 Jan 2006 gw@adcomcorp.com wrote:
> > Hello All,
> > I am having an odd problem with Armin's chan-capi_cm on builds
> > higher than 7955.
> >
> > It would seem that this happens on anything higher than 7955.
> >
> > What is happening is the isdn is ringing, then asterisk does a
> > goto-if
>
> > and just hangs.
> >
> > Asterisk itself is ok, but the isdn then rings out or busys out on
> > the
>
> > other side.
> >
> > Outgoing works fine, this only seems to effect incoming.
> >
> > I updated to chan-capi_cm 0.6.3 but there is no change.
> >
> > Noticed this when trying to update for the timebomb bug.
> >
> > I think it is somehow related to the dial command but I'm not
certain.> >
> > Has anyone else experienced such oddness?
>
> Can you please create a log (set verbose 5, capi debug)?
>
> Armin
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users