similar to: chan_sccp 20050730 release

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

> > When dialling a number, my 7960 always says "External call". Is there > any chance to tell it the difference or make it display the dialled > number (especially nice when using speeddials)? > CallInfoMessage issue, it should be fixed by Jan in the CVS, I will check it out > Is there any way with chan_sccp to have asterisk taking influence on the >

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > there are some 3rd party patches available for chan_sccp which add a > feature and fix a few problems: > > http://www.sineapps.com/news.php?rssid=726 > > sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff> > Adds support for

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set

hi, I'm trying to get the latest chan_sccp. The links from http://chan-sccp.berlios.de are all dead. Is it just me? Does anyone know an alternate source to get chan_sccp? Seems like chan_sccp is the way to go if I have a bunch of cisco phones I don't want to use SIP on? Anyone else have an opinion on the built in asterisk skinny vs the chan_sccp? thanks, Andy

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

> Sergio schrieb: > >>> pressing the "End call" softkey while in call produces the message >>> "That key is not active here". Do I have to configure something >>> special for that to work or is it just not yet implemented? >> >> you can quick apply this patch >> > Ah, great... Thanks! > You don't accidentally have a

Hi ! On Cisco 7960 (with or without 7914 add-on module) when I press speakerphone button (or select line with line button - which automatically put second line on speakerphone) after about 15-20 seconds of dialtone Asterisk stable dies (seg fault). Tested versions of Asterisk are 1.0.2, 1.0.3 or 1.0.5, chan_sccp is newest form CVS of chann-sccp.sourceforge.net ). Firmware of 7960 is

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hi, I tried to connect cisco 7910 into asterisk system using chan_sccp.so. But I got a major issue : - when I called from 7910 to another sip phone in the same asterisk server, the call took place normally. - when I called from 7910 to another sip phone in different asterisk server, the call is answered but I cannot hear nor say anything. The phone just immediately lose its tone. - when I got

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

I am using chan_sccp on bristuffed asterisk (0.2RC3 on asterisk 1.0.3). Things seem fine but I am seeing some weird stuff. I have a Kirk IP600 connecting to * with 2 handsets. The weird thing is that for incoming calls the handset that is put second as my dialstring, never rings. This is my dial string: exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm) Where DECT1

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel