asterisk users - Jan 2005 - chan_sccp and bristuff 1.0.3 weirdness

I am using chan_sccp on bristuffed asterisk (0.2RC3 on asterisk 1.0.3).

Things seem fine but I am seeing some weird stuff. I have a Kirk IP600 
connecting to * with 2 handsets.

The weird thing is that for incoming calls the handset that is put second 
as my dialstring, never rings.

This is my dial string:

exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm)

Where DECT1 & DECT2 are srings for SCCP/phonenr

If i specify DECT2 first and DECT1 second then DECT1 doesn't ring.

I did not see this behaviour on a non-bristuffed install of asterisk, both 
phones worked as expected (same config files but on a box with an X100P).

The message on the console is :
Jan 16 22:10:15 NOTICE[5005]: chan_sccp.c:103 sccp_request: Can't find 
SCCP/106): Unknown Line or Intercom

Is this a bug in chan_sccp or bristuff?

> [...]
> exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm)
> 
> Where DECT1 & DECT2 are srings for SCCP/phonenr
> 
> If i specify DECT2 first and DECT1 second then DECT1 doesn't ring.
> 
> I did not see this behaviour on a non-bristuffed install of asterisk, both
> phones worked as expected (same config files but on a box with an X100P).
> 
> The message on the console is :
> Jan 16 22:10:15 NOTICE[5005]: chan_sccp.c:103 sccp_request: Can't find 
> SCCP/106): Unknown Line or Intercom
> 
> Is this a bug in chan_sccp or bristuff?
Neither nor. You have an extra ')' in your Dial string. Instead of
exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm) use
exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2},25,tm)

-- kuj