asterisk users - Mar 2006 - SCCP problem with ATA188, Asterisk@home and chan_sccp

Hi,

 

This is a message I already posted on the chan_sccp mailing list, but since this
list has a lot of active members, I'm hoping someone might be able to help
(And my problem is * related, so I guess it's ok if I post it here also ;)
).

 

I'm trying to get SCCP ATA188s to run with Asterisk.

The Asterisk box uses the latest Asterisk@Home image (Version 2.6).

I have compiled and installed the latest release of chan_sccp
(chan_sccp-20060209.tar.bz2).

Also, I have disabled the chan_skinny module in modules.conf.

 

The problem is that I can't get the ATAs to register with the Server.

 

Here is the log that shows that the module does get loaded without problems:

Mar 16 15:37:16 VERBOSE[20048] logger.c: -- Reloading module
'chan_sccp.so' (Skinny Client Control Protocol (SCCP). Release:
20060209)

 

And here is the log showing the problem:

Mar 16 15:52:44 VERBOSE[19772] logger.c: -- SCCP: Accepted connection from
192.168.1.83
Mar 16 15:52:44 VERBOSE[19772] logger.c: -- SCCP: Using ip 192.168.1.37
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- SCCP: >> Got message
AlarmMessage
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- SCCP: Alarm Message: Severity:
Informational (2), Name=ATA16C75645EC01 Load=ATA030203SCCP051201A.zup
Last=Initialized [0/0]
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- SCCP: >> Got message
RegisterMessage
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- ATA16C75645EC01: is registering,
Instance: 1, Type: Cisco Ata 186 (12), Version: 0
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- ATA16C75645EC01: Rejecting device:
not found
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- SCCP: Old session marked down
Mar 16 15:52:46 VERBOSE[19772] logger.c: -- SCCP: Killing Session 192.168.1.83

 

I have tried different configurations in sccp.conf but the problem is always the
same.

 

Here is the configuration file as it was when the previous logs were recorded:

[general] 

keepalive = 30                   ; IMPORTANT: 5secs. lead to trouble with 

                                ; 7960 

context = internal 

dateFormat = D.M.YA              ; M-D-Y in any order (5 chars max) 

bindaddr = 192.168.1.37         ; asterisk box. 

port = 2000                      ; listen on port 2000 (Skinny, default) 

debug = 10 

 

[devices] 

type        = ata 

description = Bedroom 

tzoffset    = 0 

autologin   = 6004 

device => ATA0016c7a0e0d4

 

type        = ata 

description = Office 

tzoffset    = 0 

autologin   = 6000 

speeddial   = 6001,6001,6001@internal 

speeddial   = 6004,6004,6004@internal 

device => ATA16c7a0e0d401

 

type        = ata 

description = LivingRoom 

tzoffset    = 0 

autologin   = 6001 

speeddial   = 6000,6000,6000@internal 

speeddial   = 6004,6004,6004@internal 

device => ATA0016c75645ec 

; This is an example config with multiple phones 

; 08/2005 Stefan Gofferje 

 

[lines] 

id            = 6000 

pin           = 1234 

label         = 6000 

description   = Office 

context       = client_int_unrestricted 

callwaiting   = 1 

incominglimit = 2 

mailbox       = 1000 

vmnum         = 8500 

cid_name      = Office 

cid_num       = 6000 

line => 6000 

 

id            = 6001 

pin           = 1234 

label         = 6001 

description   = LivingRoom 

context       = client_int_unrestricted 

callwaiting   = 1 

incominglimit =  2 

mailbox       = 1000 

vmnum         = 8500 

cid_name      = Living Room 

cis_num       = 6001 

line => 6001 

 

id            = 6004 

pin           = 1234 

label         = 6004 

description   = Bedroom 

context       = client_int_unrestricted 

callwaiting   = 1 

incominglimit = 2 

mailbox       = 1000 

vmnum         = 8500 

cid_name      = Bedroom 

cid_num       = 6004 

line => 6004

 

this is a sample file I found on the net. I tried a few others, tried with and
without the device field, the type field, tried different combinations of
parameters, tried a single and multiple phones, but nothing works.

 

If anyone has an idea what might be causing this problem, I would very much
appreciate your comments and suggestions.

 

Thanks,

Jean-Fran?ois Dontigny
Software Developper
D?veloppeur logiciel

Minacom 
Simplifying Service Assurance(tm)

Minacom Labs Inc.
260, Queen Street
Montreal (Quebec)
H3C 2N8
Tel.: (514) 879-9111 x226 
Fax: (514) 879-9333 
Email: jfdontigny@minacom.com <mailto:jfdontigny@minacom.com>  
Web: www.minacom.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060316/bea37130/attachment.htm