similar to: [Fwd: IAX with shaw cable not going through]

I just changed the from DSL to Shaw Cable (static IP) configure the firewall but now asterisk I can not register with FWD nor VoipJet calls going out. I am using IAX with FWD Did I missed to change a setting? I don't think there is any though. I am on shaw extreme connection; I just talked shaw tech. and they are not blocking any port - I was told. So why IAX will not register with FWD and

How do I solve the problem with between patterns: _1800 _1NXX I would like all numbers 1800, 1877 etc to go through iaxtel but all other numbers 1xxx via voipjet Example in my extension.conf I have: [iaxtel] exten => _1700NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten => _1888NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten =>

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

I've setup my IAX2 over FWD and it is working I can receive a test call and I can call out. Though I cannot figure out how to dial 1-800 numbers over FWD When I dial 1-800 it hangs up on me. Here is a typical session: Called xxxxx:xxxxxxx@iax2.fwdnet.net/18007425877 -- Call accepted by 65.39.205.121 (format ULAW) -- Format for call is ULAW -- Hungup

Hello. I am having an issue where sometimes the cheapest provider for certain international destinations is not always reliable in completing calls. However, there is not problem once the call is made (i.e. no lag or echo or anything). The way I have it set up right now (for example) for Dar es Salaam, Tanzania is: exten => _925522XX.,1,Dial(IAX2/livevoip/011${EXTEN:1}) exten =>

----- Forwarded message from Adam Ottley <aottley@shaw.ca> ----- Date: Wed, 30 Jul 2003 19:48:16 -0600 From: Adam Ottley <aottley@shaw.ca> Resent-From: Adam Ottley <aottley@shaw.ca> To: Debian Bug Tracking System <submit@bugs.debian.org> Subject: Bug#203581: xmms-flac: Plugin misplays certain valid files Package: xmms-flac Version: 1.1.0-9 Severity: normal Certain

Hi, I am Chandramouli from India. I have successfully implemented Intercom (Dialling within my office LAN) and Voicemail features using Asterisk. To implement this, I am using X-Lite Softphone. Now, I wish to make calls to US using VoIP Asterisk. I dont think I need any external hardware to implement pure VoIP solution. Here I am sending my configuration file values: Contents of

I've been trying to resolve some quality issues and I was hoping someone might be able to provide some insight. To give you an idea the calls are coming in via a SIP DID and sent out via an IAX2 connection. Latency to both the SIP equipment and IAX equipment are around 80ms with 0 packet loss accoridng to ping tests. The server is located in a data centre so bandwidth is not an issue. Most

Hi all, I'm using VOIPJET to make international calls with an IAX2 connection between my local asterisk server and their server(s). At times I seem to have a problem if 5 or more international calls are made at once - I'm on a 1024kbps download and 256kbps upload DSL line (only the asterisk server uses this DSL line). Today I switched the codec from ulaw to ilbc in an attempt to lower

I've heard good things about VoipJet here, so I was going to set up an account. Then I noticed their Terms of Service here: https://www.voipjet.com/tos.php Several things there are very concerning to me, and I'm interested in what other people here think of them. * The ToS specifically forbids use for any call relating to medical, financial, or government matters -- as well as any

I am experiencing a very wired problem. Some of my cdr are lost. I use logging cdr to csv, mysql and odbc. But some of them are lost. They miss in csv mysql and odbc, so i'm pretty sure it is related to asterisk functioning. I am running asterisk 1.0.7; this is simple configuration file: extensions.conf [general] static=yes writeprotect=no [macro-gw-voipjet] exten =>

One would assume they have better things to do as they are quite busy. I think this is just a proactive measure meaning they say you cannot do it upfront so that in the event of a problem, it was predeclared. As to the rest of the TOS, I could be wrong but I got the impression that the owner of VoipJet speaks English as a second language due to some email exchanges. If that is the case, the TOS

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

So far my experience with TOS has been that most of them are pretty odd. No one wants the liability of a stock trade gone foul or a call to the doctor that gets disconnected. Essentially, those things in the TOS are just a CYA. They are un-enforced but should someone decide to attempt to sue based upon a financial loss, the ITSP is covered. So, yep. That is weird but not unexpected. Heaven

Hi List, I'm wondering if someone who uses VoipJet as their termination service would do me a favor. If I call the American Airlines reservation number (1-800-433-7300), the call gets connected, but after 30 seconds asterisk drops the call responding that no one answered. I'm using areskicc2 (calling card app) as an authentication system and I don't know if that is what is

Hi, I just setup a VoipJet test account (one with 25c credit) to test, they seem to offer good rates to 02 Uk mobiles :) Anyway, everything went ok, iax.conf amended and extensions.conf too, however when I try to make a call I see:- rt*CLI> -- Executing SetCallerID("SIP/2008-d747", "4153574000") in new stack -- Executing Dial("SIP/2008-d747",

I try to connect to voipjet, but I get always busy, ... it worked yesterday, ... no changes on my side.... -- Executing SetGroup("SIP/615-829b", "iax-voipjet") in new stack -- Executing Dial("SIP/615-829b", "IAX2/17567@voipjet/011886228357765") in new stack May 20 18:16:26 NOTICE[9733]: app_dial.c:973 dial_exec_full: Unable to create channel

Hi List, I have set up the following in my extensions.conf ; local numbers look like 0262XXXXXX ; but must be dialed 262 262XXXXXX exten => _0262XXXXXX,1,Dial,IAX2/543@voipjet/011262262${EXTEN:4} exten => _0262XXXXXX,2,Dial,IAX2/jhiver@NuFone/011262262${EXTEN:4} exten => _0262XXXXXX,3,Congestion It did work for a while, however when dialing I get: stargate*CLI> -- Executing

The past two days, I've been having issues with my two VoIP service providers where calls just suddenly hang up. The following is from the log: Mar 14 13:50:55 WARNING[5887] chan_iax2.c: Max retries exceeded to host 64.34.45.100 on IAX2/voipjet-3 (type = 6, subclass = 11, ts=250000, seqno=80) Mar 14 13:50:55 DEBUG[10428] channel.c: Didn't get a frame from channel: IAX2/voipjet-3 Mar

Sirs/Ladies, Not sure if anyone saw anything like that before... I was playing with an Asterisk setup with a Grandstream BT101 (1.0.5.11) and www.voipjet.com (IAX2). The other devices I have home (Sipura 3k and DTA-310) seem to work just fine, but the Grandstream seems to suffer from one-way voice (remote end can't hear me). The only workaround I found so far (have not spoken with VOIPJet