similar to: ivr not working?

Hi, Does anyone know how to configure speex in asterisk 1.0.10? I've successfully installed it but cannot get any idea how to set the quality, etc.. Thanks Regards, Stevanus

Hi guys, I 've tried asterisk 1.2.2. It work flawlessly for about 3 days then at the third days I activated setting jitterbuffer=yes and suddenly there is no voice when the call is picked up. It's really weird as if asterisk stops sending rtp packet. I've checked asterisk log and found nothing suspicious. Just weird :S. I tried it in 3 asterisk server and all of them are having

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

Hello- I have a low traffic AAH setup, a few hardphones, a few softphones, 50 calls per day max. I used the AMP Digital Receptionist to make a simple voice menu: "Thank you for calling xxxx". I did this for both Normal times and After Hours times. It worked fine. I then went to the AMP Maintenance window, Config Edit, got the "phpconfig for Asterisk PBX" page, and selected

Hi, I tried to connect cisco 7910 into asterisk system using chan_sccp.so. But I got a major issue : - when I called from 7910 to another sip phone in the same asterisk server, the call took place normally. - when I called from 7910 to another sip phone in different asterisk server, the call is answered but I cannot hear nor say anything. The phone just immediately lose its tone. - when I got

Hi, I just joined the list, anyways i am trying to setup an @home box with a x100p card and so far i can't even get the box to pickup the incoming call and in the amp management under the section "send calls from PSTN too" page all the radio buttons are blank and i want to use the digital receptionist, also when i try to setup digital receptionist via uploading wav file and save, it

I would like to setup an option in my digital receptionist that callers can select to hear a read back of their Caller ID. It would be something like, "the number you are calling from is...". I think I can reuse the festival script that is built in, but ideally this could be accomplished without using festival because Allison's voice is so much more pleasant. I'm just a few

Hi, Quick question. With an old phone system a receptionist receiving a call has 1 button to push to transfer calls to a specific extension, with Asterisk, a receptionist would actually put the caller on hold, pick up another line, call the extension, ask if the person is available, hang up pick up the caller again and transfer. To me it's seems a long way to simply do a receptionist

Hi! I've got a number of extensions (about 50) on a working Asterisk setup. For each user, I have two extensions configured (for example 11021 for a Cisco 79XX phone and 11022 for X-Lite), and a ring group that ties the two extensions together (for example, 1102). Reason being that if the user is away from his/her desk or working offsite, they can answer the soft phone on the PC. From

Hi, Just set up AAH 1.1 using an HFC BRI line and 5 IP phones as per http://voip-info.org/tiki-index.php?page=ACT+P104+IP+Phone The dialplan was configured through AMP and has nothing fancy in it. As a first time user of not only Asterisk, but also a PBX, there are some operator teething problems. After much googling & searching of voip-info.org, I cannot find any answers to these

Hi, I've tried to upgrade my asterisk to 1.2.3 again after disastrous bug incident yesterday but when I called and the phone was picked up, there was simply busy tone... Weird, is this another bug in asterisk 1.2.3? Currently, I rollback again to asterisk 1.0.10...:( Is there any configuration change issue in 1.2.3 cause I've just used my configuration that worked in asterisk1.2.2 ?

Hello all, A new version of the Asterisk Management Portal is available for download. Please visit the AMP homepage at http://amp.coalescentsystems.ca Upgrade instructions are at http://amp.coalescentsystems.ca/UPGRADE Use our Sourceforge mailing list and forum for discussions about AMP. 1.10.006 ChangeLog: - Use extensions_custom.conf for customizations. Sample included. - Added option

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

I have a customer who wants their receptionist to input the users' long distance PINs for the because they use each others pins. I am having trouble coming up with a way to do this because of creating a channel between the user and receptionist, dropping the channel and its variables and creating a new one for the actual long distance call. Any advice is really needed. 1. User Dials Long

Hi all, At our customer site i've installed one asterisk server with 20 Grandstream GXP2000's. Firmware 1.0.1.9. When someone dials the customer, the receptionist picks up, and does an attended transfer (the 'grandstream way') to a collegue. Most of the times this goes ok, but sometimes, when the receptionist puts the call on hold, and tries te reconnect to the caller there's

Hi, After days tinkering with this digium card (TDM04B), I notice that this card has a slow response in detecting ring signal from pstn and hanging up when the call is over. The delay can consume up to several seconds... Is this normal? Best regards, Stevanus

Hi, Sorry for keep hammering the list with this annoying question. Can we use Intel 536 ep (not 537ep that is in wiki) as x100p clone? I know I've asked it in this list a couple days ago but none responded so far and I'm getting frustrated pairing it with asterisk as the zaptel driver could not detect it. I just need more information before I throw this intel 536 EP to the garbage can

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

I have a Polycom IP600 serving as a receptionist phone. We developed a call manager via c/gtk that runs on a touchpad. It allows them to transfer calls, transfer to voicemail, page, etc. The problem is this: When paging another phone from the touchpad, I have to open a channel to the receptionist phone. This rings the receptionist phone. When she picks up, it then pages the desired person. This is

Hey all... Scenario (INTERNAL) 1 Call comes in to receptionist and gets transferred to someone 2 No one picks up that transfer 3 Call goes back to receptionist Now when the call goes back to the receptionist, how can I change either the ringer, the callerID or both? * TIA