similar to: Problem with FXO taking a call

Howdy, 1 x TDM400P card with 1 x fxo module. 1 x BT Pots line. Location - UK Calls work fine outbound but i'm unable to pickup the inbound calls. Asterisk debug: Asterisk -vvvvvvvvvvcg *CLI> -- Starting simple switch on 'Zap/1-1' -- Executing Wait("Zap/1-1", "1") in new stack -- Executing Answer("Zap/1-1", "") in new stack

Hello, I have recently purchased a TDM400P card with one FXO expansion card, and I'm having problems. The card does not pick up incoming calls. Asterisk detects the ringing line and rings various SIP phones as required. When a sip phone answers, the sip user hears nothing and the PSTN user continues to hear ringing. Here is the asterisk output for an incoming call:

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hi all! I am in the same situation here in Sweden, but I just got the X100 card and don t get it to work with DTMF caller ID. Is the only way to solve this to buy a TDM400 card w FXO modules? Is it just a driver question or a HW issue with the X100 card? Where to find dok about the new keywords in conf files like "cidstart=polarity" in zapata.conf? rgds Gunnar >>>

I've updated to the latest CVS as of today (and rebuilt RedHat 9). My setup is as follows: Wildcard X101P - channel 1 TDM400P - channels 2-3 - fxs cards with fxo signalling, channels 4-5 - fxo cards with fxs signalling I got CallerID to work on channel 4 with an old CVS, despite the usual "Didn't finish CallerID spill" message. However, as soon as I insert the following

Hi all... I have a problem with caller id on my asterisk server. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. My extensions.conf : [incoming1] exten =>

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hello gang, We just got MaBell to turn on our callerid. I tested the capability with a southwest bell box and a plain phone, so I know the line is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a TDM400P card. Here is my dahdi_cfg -vv output: dahdi_cfg -vv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.3 Echo Canceller(s): MG2

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

<font size="2">I've got an odd situation where callerid is only picked up every other call.&nbsp; Is there anything I can do so callerid works on all calls?<br><br>I'm seeing the channel hangs up during a call<br><br>&nbsp; == Starting post polarity CID detection on channel 4<br>&nbsp;&nbsp;&nbsp; -- Starting simple switch

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Hi all, I've just got an OpenVox A400P card with 1 FXO and 1 FXS module and I am just trying to get it working. But no luck as of yet. In /etc/zaptel.conf I've set the following options: fxsks=2 fxoks=1 loadzone=se defaultzone=se And in /etc/asterisk/zapata.conf I've not sure what to set exactly. For example, under [trunkgroups] what to specify there? Under [channels I set something

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hi list, My caller ID is not working anymore on my TDM11B (TDM400P) cards and i get this error message on the asterisk console: == Starting post polarity CID detection on channel 4 -- Starting simple switch on 'Zap/4-1' [Jul 8 11:58:55] WARNING[9539]: callerid.c:219 callerid_get_dtmf: Couldn't detect start-character. CID parsing might be unreliable A long time ago my

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.

Hi everyone, Sometimes i am having problems with Zap channels on asterisk 1.2 (Disc-OS 1.1), after some calls, the channel continues in use, even after hanging the call up, then i need to run the "soft hangup Zap/<zapchannel>" in the asterisk CLI to release the channel. Here is my zapata.conf: [trunkgroups] [channels] language=pt_BR context=default usecallerid=yes

I am trying to configure Asterisk for BSNL, india network. I have successfully configured it for outgoing calls. When any outside number make any call to trunk then it receives the call properly but when the call is disconnected by inside extension then outside phone does not get a busy tone. Asterisk incoming call log: -- Executing [s at incoming:2] Dial("Zap/4-1", "Zap/1")