Heloo,
I think that your error is:
zaptel.conf:
-----------------------
fxsks=1
loadzone = uk
defaultzone = uk
zapata.conf:
----------------
[channels]
language=en
context=incoming
signalling=fxs_ks
busydetect=yes
busycount=4
callprogress=no
relaxdtmf=yes
callwaiting=no
callwaitingcallerid=no
threewaycalling=no
transfer=yes
cancallforward=yes
usecallerid=no
cidsignalling=v23
cidstart=polarity
callerid=no
hidecallerid=no
echotraining=yes
echocancel=yes
echocancelwhenbridged=yes
musiconhold=default
immediate=no
channel = 3
Best Regards
On 9/11/07, Tom Playford <tom at playford.net>
wrote:>
> Hello,
>
> I have recently purchased a TDM400P card with one FXO expansion card,
> and I'm having problems.
>
> The card does not pick up incoming calls. Asterisk detects the ringing
> line and rings various SIP phones as required. When a sip phone
> answers, the sip user hears nothing and the PSTN user continues to
> hear ringing. Here is the asterisk output for an incoming call:
>
> -------------------------------------
> == Starting post polarity CID detection on channel 3
> -- Starting simple switch on 'Zap/3-1'
> -- Executing Set("Zap/3-1", "CALLERID(all)=call to
322817") in new
> stack
> -- Executing Dial("Zap/3-1", "Local/601 at
special|45") in new stack
> -- Called 601 at special
> -- Executing Dial("Local/601 at special-ebb2,2",
"SIP/203|30") in new
> stack
> -- Called 201
> -- SIP/203-0814c448 is ringing
> -- Local/601 at special-ebb2,1 is ringing
> -- SIP/201-081445e8 is ringing
> -- SIP/201-081445e8 answered Local/601 at special-ebb2,2
> -- Local/601 at special-ebb2,1 stopped sounds
> -- Local/601 at special-ebb2,1 answered Zap/3-1
> == Spawn extension (special, 601, 1) exited non-zero on
> 'Local/601 at special-ebb2,2'
> == Spawn extension (special, 601, 1) exited non-zero on
> 'Local/601 at special-ebb2,2'
> Sep 11 19:25:55 WARNING[3073]: chan_zap.c:3934 zt_handle_event:
> Ring/Off-hook in strange state 6 on channel 3
> == Spawn extension (incoming, s, 2) exited non-zero on 'Zap/3-1'
> -- Hungup 'Zap/3-1'
> -------------------------------------
>
> I have set opermode to 'UK' (as I'm in the UK), and dmesg
confirms the
> setting.
>
> Outgoing calls also fail, the SIP user hears nothing, yet asterisk
> claims that the call has been picked up. Here is the asterisk log,
> looks perfectly normal:
>
> -------------------------
> -- Executing Dial("SIP/201-08154a38",
"Zap/3/0800800800") in new stack
> -- Called 3/0800800800
> -- Zap/3-1 answered SIP/201-08154a38
> -------------------------
>
> I am running Debian Etch with kernel 2.6.18 and asterisk version 1.2.13.
>
> I'm beginning to think it's a fault with the expansion card...
anyone
> else got any ideas? Oh and the BT line is fine, it works (as well as
> can be expected) with a X100P card I have.
>
>
> Thanks,
>
> Tom
>
> Attached:
>
> dmesg output:
> ------------------------
> apata Telephony Interface Registered on major 196
> Zaptel Version: 1.2.16
> Zaptel Echo Canceller: MG2
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level,
> low) -> IRQ 12
> Freshmaker version: 73
> Freshmaker passed register test
> Module 0: Not installed
> Module 1: Not installed
> Module 2: Installed -- AUTO FXO (UK mode)
> Module 3: Not installed
> Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules)
> Registered tone zone 4 (United Kingdom)
> -----------------------------
>
> zapata.conf:
> ----------------
> [channels]
> language=en
> context=incoming
> signalling=fxs_ks
> busydetect=yes
> busycount=4
> callprogress=no
> relaxdtmf=yes
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=yes
> cancallforward=yes
> usecallerid=no
> cidsignalling=v23
> cidstart=polarity
> callerid=no
> hidecallerid=no
> echotraining=yes
> echocancel=yes
> echocancelwhenbridged=yes
> musiconhold=default
> immediate=no
> -----------------
>
> zaptel.conf:
>
> -----------------------
> fxsks=3
> loadzone = uk
> defaultzone = uk
> -----------------------
>
> _______________________________________________
>
> Sign up now for AstriCon 2007! September 25-28th.
> http://www.astricon.net/
>
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070911/7aff206e/attachment.htm