Hello gang,
We just got MaBell to turn on our callerid. I tested the
capability with a southwest bell box and a plain phone, so I know the line
is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a
TDM400P card. Here is my dahdi_cfg -vv output:
dahdi_cfg -vv
DAHDI Tools Version - 2.1.0.2
DAHDI Version: 2.1.0.3
Echo Canceller(s): MG2
Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
1 channels to configure.
Setting echocan for channel 1 to mg2
<<chan_dahdi.conf>>
[trunkgroups]
[channels]
language=en
resetinterval=3600
inbanddisconnect=yes
priindication=outofband
signalling=fxo_ks
usecallerid=yes
cidsignalling=bell
cidstart=polarity
usedistinctiveringdetection=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
;callerid=Mickey Mouse <2564286000>
;cid_number=2564286000
callerid=asreceived
useincomingcalleridondahditransfer=yes
faxdetect=both
group=1
callgroup=1
pickupgroup=1
<<dahdi.conf>>
[trunkgroups]
[channels]
context=incoming
busydetect=yes
callprogress=yes
busycount=4
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
usecallingpres=yes
priindication=outofband
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
faxdetect=both
rxgain=8.0
txgain=4.0
callgroup=1
group=1
callerid=asreceived
cidstart=ring
hidecallerid=no
pickupgroup=1
<<dahdi-channels.conf>>
; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 14 08:12:27 2009 -- do
not hand edit
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is
intended
; to be #include-d by /etc/asterisk/chan_dahdi.conf that will include the
global settings
;
; Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer) 1" (MASTER)
; Span 2: WCTDM/4 "Wildcard TDM400P REV I Board 5"
;;; line="1 WCTDM/4/0 FXSKS (EC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
cidstart=polarity
context=default
channel => 1
group=1
priindication=outofband
signalling=fxs_ks
channel => 1
Here is my CLI output for a call (not from extension 170)
*CLI> -- Starting simple switch on 'DAHDI/1-1'
-- Executing [s at DLPN_DialPlan1:1] NoOp("DAHDI/1-1", "all
"Mickey Mouse"
<170>") in new stack
-- Executing [s at DLPN_DialPlan1:2] NoOp("DAHDI/1-1", "ANI
170") in new
stack
-- Executing [s at DLPN_DialPlan1:3] NoOp("DAHDI/1-1", "NUM
170") in new
stack
-- Executing [s at DLPN_DialPlan1:4] NoOp("DAHDI/1-1", "NAME
Mickey Mouse")
in new stack
-- Executing [s at DLPN_DialPlan1:5] NoOp("DAHDI/1-1", "DNID
") in new
stack
-- Executing [s at DLPN_DialPlan1:6] Answer("DAHDI/1-1",
"500") in new
stack
-- Executing [s at DLPN_DialPlan1:7] Wait("DAHDI/1-1",
".1") in new stack
-- Executing [s at DLPN_DialPlan1:8] Verbose("DAHDI/1-1", "
caller s id
170") in new stack
caller s id 170
-- Executing [s at DLPN_DialPlan1:9] BackGround("DAHDI/1-1",
"to-hear-callerid") in new stack
-- <DAHDI/1-1> Playing 'to-hear-callerid' (language
'en')
-- Executing [s at DLPN_DialPlan1:10] SayNumber("DAHDI/1-1",
"170") in new
stack
-- <DAHDI/1-1> Playing 'digits/1' (language 'en')
-- <DAHDI/1-1> Playing 'digits/hundred' (language
'en')
-- <DAHDI/1-1> Playing 'digits/70' (language 'en')
-- Executing [s at DLPN_DialPlan1:11] BackGround("DAHDI/1-1",
"record/welcometodebs") in new stack
-- <DAHDI/1-1> Playing 'record/welcometodebs' (language
'en')
-- Executing [s at DLPN_DialPlan1:12] Goto("DAHDI/1-1",
"default|s|1") in
new stack
-- Goto (default,s,1)
-- Executing [s at default:1] Wait("DAHDI/1-1", "1") in
new stack
-- Executing [s at default:2] Verbose("DAHDI/1-1", "Ringing
") in new stack
Ringing
-- Executing [s at default:3] Set("DAHDI/1-1",
"NIGHTOP=888") in new stack
-- Executing [s at default:4] Set("DAHDI/1-1",
"GEORGECELL=9199225") in new
stack
-- Executing [s at default:5] Set("DAHDI/1-1",
"LOISCELL=9199226") in new
stack
-- Executing [s at default:6] Set("DAHDI/1-1",
"DANNYCELL=6163010") in new
stack
-- Executing [s at default:7] Verbose("DAHDI/1-1", "Wait 1
") in new stack
Wait 1
-- Executing [s at default:8] Wait("DAHDI/1-1", "1") in
new stack
-- Executing [s at default:9] Verbose("DAHDI/1-1", "Caller
name Mickey
Mouse ") in new stack
Caller name Mickey Mouse
-- Executing [s at default:10] Verbose("DAHDI/1-1", "Caller
number 170 ")
in new stack
Caller number 170
-- Executing [s at default:11] Verbose("DAHDI/1-1", "Called s
") in new
stack
Called s
-- Executing [s at default:12] Goto("DAHDI/1-1",
"getout") in new stack
-- Goto (default,s,25)
-- Executing [s at default:25] BackGround("DAHDI/1-1",
"vm-goodbye") in new
stack
-- <DAHDI/1-1> Playing 'vm-goodbye' (language 'en')
-- Executing [s at default:26] Hangup("DAHDI/1-1", "")
in new stack
== Spawn extension (default, s, 26) exited non-zero on 'DAHDI/1-1'
* Hungup 'DAHDI/1-1'
Any suggestions/ideas?
Thanks
Danny Nicholas
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090703/a4d05260/attachment.htm
